blizzard FMX7 7 Litre Planetary Mixer Instructions

: June 5, 2024
: blizzard

Table of Contents

MACHINE DIMENSION
ELECTRIC DIAGRAM
Introduction
WARNING AND SPECIAL ATTENTION
OPERATION INSTRUCTION
FIGURE 1 FULL OF THE MACHINE
FIGURE 2 FULL OF THE GEAR
Figure 3 HANDGRIP TYPE BOWL LIFTER UINT
Figure 4 TURNING PLATE AND MIXING AXLE
Figure 5 STANDARD ACCESSORIES
Documents / Resources

FMX7 7 Litre Planetary Mixer
Instruction Manual blizzard FMX7 7 Litre Planetary
Mixer FMX7

MACHINE DIMENSION

blizzard FMX7 7 Litre Planetary Mixer - figure 3

ELECTRIC DIAGRAM

blizzard FMX7 7 Litre Planetary Mixer - figure 4

Introduction

OVERVIEW

Our 7-liter mixer has a high 650 Watts power to allow the mixing of stiffer dough and larger batches.
All metal body and counter-top style is designed professionally.
Its shafts are mounted in ball bearing and 100% steel gears drive.
Mechanical 3-speed control helps you to enjoy non-top shifting speed.
Planetary mixing action and digital timer ensure perfect results.
A simple hand lift is good for changing bowls and attachments.
When overloading, power off automatically to protect the motor and electrical.
Safety guard with micro switch

SAFETY PRECAUTIONS
When using this machine, always make sure the following conditions or operations are in effect. Failure to do this will may be the cause of accidents.

Keep hand & clothing away from bowl and attachments when in operation.
Keep rigid objects away from the bowl and attachments when in operation.
To protect against the risk of electrical shock, do not immerse the mixer in water or other liquid.
Use the machine only with the electrical service specified on its nameplate.
Disconnect the machine from its power source before carrying out any maintenance.
Do not disable or remove the safety mechanisms included with the machine.
Do not leave the machine in operation unattended.
Observe maintenance and safety inspection schedules.
Maximum bread dough capacity 1500 gram on a basis of 60 percent water.

SPECIFICATIONS

Motor:	600 Watts powerful, ball-bearing ventilated within mixer enclosure.
Electrical: Switch & Timer:	220-240V/110-120V single phase All in one digital

control panel
Cord and Plug:| respectively consist of 3 wires which one wire is connected for grounding, other wires are connected to the power supply.
Transmission:| The gears constantly mesh in a special lubricant assuring long lift; transmission gears are of heat-treated alloy steel, with high accurate construction. All bearings are ball bearings.
Speed:| The mixer has five positive speeds as 100 RPM-500RPM
Safety Guard:| Smoothly rotate open with a micro switch to shut off power immediately to protect the operator.
Dimension:| 345x435x510mm
Net Weight:| 20kg
Standard:| Stainless steel bowl 1pc
Attachment:| Mixing hook: 1pc
Flat beater: 1pc
Whipping ball: 1pc

INSTALLATION

BEFORE INSTALLING YOUR MIXER, CHECK TO BE SURE THAT YOUR ELECTRICAL SERVICE SPECIFICATIONS MATCH THOSE OF YOUR MIXER AS PRINTED ON THE USER’S NAMEPLATE.

LOCATION
Place the mixer in its operating location. The bench should be placed on a sturdy level surface. There should be adequate space around the mixer for the user to operate the control and install and remove bowls.

ELECTRICAL CONNECTIONS
WARNING:
THE SUPPLY CORD ON THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THE OUTLET TO WHICH THIS PLUG IS CONNECTED BE PROPERLY GROUNDED.

MIXING CAPACITY:

PRODUCT	TOOL	7 LITER BOWL
Egg whites	Whip	700 g
Mashed potatoes	Beater	1500 g
Mayonnaise ( Qts. Oil)	Beater	3 liter
Meringue (Qts. Water)	Whip	1 liter
Waffle/Pancake Batter	Beater	2 liter
Whipped Cream	Whip	3 liter
Sheet Cake Batter	Beater	2000 g
Layer Cake	Beater	2500 g
Pound Cake	Beater	2500 g
Sugar Cookie	Beater	2500 g
Sponge Cake	Whip	1000 g
Dough, pie	Beater	1500 g
Bread or Roll Dough (Light/Medium, 60% water)	Hook 1 speed	Water 500g

800 g

SPECIFICATION

Type	1310	FMX7
Mixer ( L)	10	7
Power Supply ( V )	110-120V	220-240V
Input Power ( W )	600	650
654	545
302	252
154	128
Mix flour Capacity(kg)	0.8	0.8

WARNING AND SPECIAL ATTENTION

WARNING

DON’T USE A WATER PIPE TO WASH THE MIXER DIRECTLY;
PLEASE PULL OFF THE PLUG BEFORE MAINTAINING, AND MAKE IT MAINTAINED BY PROFESSIONALS;
DON’T TOUCH THE SWITCH AND PLUG IT WITH A WET HAND;
IF BROKEN, PLEASE STOP USING IT AT ONCE
THERE IS A GROUNDED NUT (SIGNED “ “) IN THE MACHINE, PLEASE RECOVER IT TO THE ORIGIN CONDITION, AND DON’T CANCEL THE GROUNDED LINE;
DON’T PUT HANDS INTO THE BOWL OR TOUCH THE MIXING DEVICES WHEN WORKING;
DON’TALLOW THE MINOR CLOSE TO THE MACHINE;
THE MACHINE SHOULD BE FIXED ON THE DRY WOODEN SPLINT AND WORK IN A SAFE AREA;
IF THE ELECTRICAL WIRE IS BROKEN, PLEASE CHANGE IT BY PROFESSIONALS.

SPECIAL ATTENTION

BEFORE USING, PLEASE CLEAN THE BOWLAND OF THE MIXING DEVICES CAREFULLY, AND THEN INSTALL THE BOWL ONTO THE MACHINE CORRECTLY AND TIGHTLY;
WHEN CHOOSING MIXING DEVICES, PLEASE REFER TO THE OPERATION MANUAL TO CHOOSE THE CORRECT SPEED, OR IT WILL DESTROY THE INSIDE SPARE PARTS AND SHORTEN THE USING LIFE OF THE MACHINE;
AFTER USING, PLEASE POWER OFF THE MACHINE, AND PUT THE BOWLAND DEVICES IN A SAFE AND CLEAN PLACE AFTER CLEANING;
KEEP THE ENVIRONMENT AROUND THE MACHINE DRY HEALTHY AND SAFE.

In order to keep safety, when using Mixing device I/II/III, Please pay attention to inserting their grooves which are from the handles into the spiral axle pin separately. Furthermore, rise the bowl to the highest position, so that the edge of the bowl is higher than the Mixing device I/II/III working position.

OPERATION INSTRUCTION

| Before using, please check the power supply if it matches your machine and be sure the ground wire is reliable.
---|---
| Before testing, please take the mixing device off first, in order to avoid damage to the machine which is matching the moving direction. It’s necessary to change the three-phase machine if the moving direction is not matched with an arrow.

OFF

| For changing the speed: Please stop the machine first before changing speed in order to avoid damaging the gearbox.
| Mixing: according to the different mixing materials.
Choose the different mixing devices and speeds.
| A: Be suitable for mixing and stirring butter, and eggs, and work at a high speed, the working time is less than 10 minutes.
B. Be suitable for mixing and stirring stuffing and raw material, and work in middle speed, working time is less than 20 minutes.
C: middle position is suitable for mixing dough, working time is less than 30 minutes. Flour water quantity is 50%-60%.

FIGURE 1 FULL OF THE MACHINE

blizzard FMX7 7 Litre Planetary Mixer - figure 7

Item	Description	Qty
1	plastic cover	1
2	top cover screw	1
3	top cover	1
4	screw M5*8	10
5	motor	1
6	spring ring	7
7	screw M6’16	3
8	screw M6’25	4
g	rear cover	1
10	stand	1
11	cable connector	1
12	electrical grounding	1
13	seat net	1
14	screw M4’8	4
15	screw M6’20	4
10	seat	1
17	arm	1
18	board	1
19	net’s open bar	1
20	pin 6’18	1
21	body	1
22	bearing cover	1
23	spring ring	4
24	screw M5’20	6
25	center axle cover	1
26	gear axle cover	2
27	stop ring 26	2
28	stop ring 32	2
29	net’s switch rack	1

FIGURE 2 FULL OF THE GEAR

blizzard FMX7 7 Litre Planetary Mixer - figure 6

Item	Description	Qty
1	bearing 6201	1
2	cover	1
3	roller	4
4	spring	4
5	engager	1
6	gear ring	1
7	dividing ring	1
8	joint gear	1
9	bearing ring	2
10	joint	1
11	centre axle	1
12	key 5*14	1
13	key 4*22	2
14	key 4*28	1
15	big joint gear	1
16	bearing 6003	1
18	0 ring 16’1.8	1
18	center axle sleeve	1
19	big joint gear sleeve	1
20	spring ring 10	1
21	nut M10	1
22	bearing 6000	4
23	stop ring 16	2
24	gear	1
25	worm gear	1
26	wrom axle	1
28	key 4*18	1
28	stop ringl3	1
29	high speed gear	1
30	gear axle	1
31	key 4*10	1
32	fork’s nut	2
33	fork’s spring	2
34	fork’s small axle	2
35	fork	1
36	speed block	1
38	spring	4
38	steel ball 5	4
39	0 ring 11.8’1.8	1
40	see block axle	1

Figure 3 HANDGRIP TYPE BOWL LIFTER UINT

blizzard FMX7 7 Litre Planetary Mixer - figure 5

Item	Description	Qty
1	handle	1
2	screw M8*12	1
3	crank throw wheel	1
4	lifting bar	1
5	lifting switchboard	1
6	screw M6*8	2
7	micro switch	1
8	pin 3’18	1
9	arm’s pull plate	1
10	spring ring 6	2
11	screw M6*12	2
12	flat washer	2
13	arm’s spring	1
14	nut M8	2
15	micro-switch	1
16	switch knot	1
17	switchboard	1
18	switch rack	1
19	knot	1
20	nut	2
21	spring ring	2
22	arm	1
23	bowl’s screw	2

Figure 4 TURNING PLATE AND MIXING AXLE

blizzard FMX7 7 Litre Planetary Mixer - figure 2

Item	Description	Qty
1	net’s screw	2
2	inner gear	1
3	screw M6*20	4
4	safety net (A)	1
5	safety net (B)	1
6	stop ring 12	1
7	planetary gear	1
8	bearing 6002	2
9	turning plate	1
10	oil seal PD32175	1
11	key 4*10	1
12	mixing axle	1
13	screw	4
14	safety net ring	1

Figure 5 STANDARD ACCESSORIES

blizzard FMX7 7 Litre Planetary Mixer - figure 1

Item	Description	Qty
1	Mixing device I	1
2	Mixing device II	1
3	Mixing device III	1
4	bowl	1
5	driver box	1
6	driver	1
7	driver box cover	1
8	driver fixing plate	1

Disposal
EU regulations require products to be disposed of by specialist companies who remove or recycle all gasses, metal, and plastic components.
Consult your local waste collection authority regarding the disposal of your appliance. Local authorities are not obliged to dispose of commercial equipment but may be able to offer advice on how to dispose of the equipment locally.
All packaging materials should be disposed of in an environmentally friendly way.

Environmental protection
Discarded electric appliances are recyclable and should not be discarded in domestic waste!
Please actively support us in conserving resources and protecting the environment by returning this appliance to the collection centers (if available).

Compliance
Parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.
Products have been approved to carry the following symbol:

Pentland Wholesale Ltd, Blizzard House, Unit 17 Walker Industrial Estate, Walker Road, Blackburn, Lancashire, BB1 2QE.

Tel: 01254 614444
www.pentlandwholesale.co.uk