SALTO XS4 Mullion Wall Reader Installation Guide
- June 9, 2024
- SALTO
Table of Contents
SALTO XS4 Mullion Wall Reader
Installation guide
The SALTO slim wall reader for flush mounting has been specially designed to
fit lifts, sliding doors or electric gate doors that have a narrow profile
frame, and where there is insufficient space to install a standard wall
reader.
It works in conjunction with SALTO controllers.
Installation
Electrical characteristics
Operation conditions
| Min. | Max. Unit |
|---|---|
| Temperature WRDM0B | -30 |
| Temperature WRDM0J | -25 |
| Humidity | 35 |
RF characteristics
Min| Cen.| Max.|
---|---|---|---
RFID frequency| | 13.56| | Mhz
Bluetooth Smart
frequency
| 2.4| 2.445| 2.4835| Ghz
Cable type and max. distances
Cable type Reader
UTP Cat5e 2 pairs 213ft
AWG24 65m
UTP Cat5e 4 pairs 656ft AWG24 + 200m
SP224861/SP224895 Nota2
Pares trenzados 984ft AWG18 300m
Note: UL tested at 100m at AWG 24.
Power Consumption Note1
| Min | Max | Unit |
|---|---|---|
| Reader | 195 | mA |
Note 1: Installer must take this data into account to dimension the CU42xx
power supply.
Mullion Reader only for use with the SALTO Control Units.
SALTO recommends to use one cable per wall reader.
Installation example CU42xx
| B | Green |
|---|---|
| A | White |
| Black | |
| +V | Red |
Installation example CU41xY:
Installation example CU42xx with RJ45xx:
Minimum distance between readers 20in (50cm).
Installation example CU41xY with RJ45xx:
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in
this catalog, its design, construction, and/or materials.