AXAGON PCEE-GRF Gigabit Ethernet PCI-EXPRESS Card Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
PCEE-GRF Gigabit Ethernet PCI-EXPRESS Card
Instruction Manual
PCEE-GRF Gigabit Ethernet PCI-EXPRESS Card
INFO
LED INDICATION
LEFT LED| | RIGHT LED|
---|---|---|---
| NO LAN| | NO DATA
| LAN CONNECTED| | DATA TRANSFER
TECHNICAL SUPPORT: More information, FAQs,
manuals and drivers can be found on the product page in the PRODUCT SUPPORT
tab at www.axagon.eu. Nothing helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
Turn off your computer and unplug the power supply cable.
Open up the case and slide in the card into a free PCI-Express slot.
Close the case, connect the power and turn on the computer.
An automatic detection of the card and automatic Installation of drivers will
be performed.
If no automatic installation is performed, please download the driver from
www.axagon.eu. Install the driver and restart the computer.
In case the computer is not connected to the Internet please download the
driver on your smartphone or on another computer and transfer it via U5B
drive.
In the Device manager, please check the successful Installation of the driver
(fig. 1).
Connect the network cable to the network card.
Check the functionality of the network card. E.g. open the Internet browser
and try to open up any webpage.
You can find link to further details and information on the last page of this
manual.
Technical specifications
INPUT INTERFACE
PCI-Express 1.1 PCI-Express 1.0a / 2.0 / 2.1 / 3.0 compatible 1-Lane (x1) x1 /
x4 / x8 / x16 slots compatible
OUTPUT INTERFACE
Gigabit Ethernet 10/100/1000 Mb/s R1-45 connector IEEE 802.3 10Base-T, IEEE
802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications supported
SUPPORTED
Microsoft NDIS5 / NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) Segmentation
Task-offload Large Send V1 & Large Send V2 Protocol Offload ARP & NS IEEE
802.1 P Layer 2 priority encoding & decoding IEEE 802.10 ULAN tagging IEEE
802.3az Draft 3.0 EEE (Energy Efficient Ethernet), RSS (Receive-side Scaling)
full duplex with IEEE 802.3x flow control, Auto MDI/MDIX Wake-on-LAN & remote
wake-up
OS SUPPORTED
Windows XP • Vista • 7 • 8.1 • 10 & later Windows Server 2003 • 2008 • 2012 •
2016 & later 32 & 64bit versions supported
OS X 10.4 & later
Linux 2.6.x & later
MS DOS • FreeBSD 7.x / 8.0 / 9.0 SCO Unix 5.0.6 / 5.0.7 • 5(0 OpenServer 6
UnixWare 7.1.x • Novell server OS 5.x / 6.x Novell client for DOS (ODI driver)
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/pcee-grf#supportLinkGoal
PCIe card with Gigabit Ethernet port
0 2022 AXAGON Wrobce / Manufacturer: RealQ s.r.o. – 2elezna 5, 619 00 Brno,
Czech Republic All rights reserved. All text and pictorial materials contained
in this document are protected by Copyright Act. All marks indicated here are
the registered trademarks of their appropriate owners. Specifications are
subject to change without prior notice. Made in CHINA for Axagon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>