PNi S75 CB Antenna With Butterfly User Manual

June 9, 2024
PNI

S75 CB Antenna With Butterfly
User Manual
PNI S75 CB butterfly antenna

with mount, cable and PL259 connector included

Description:

CB radio antenna suitable for both cars and trucks, compatible with any CB radio. Very easy to install with the cable and mount in the package.

Installation:

  • Connect the CB antenna and the mount with the butterfly screw.
  • Attach the antenna-mount assembly to a fixed bracket (eg PNI L1, PNI SPA110, PNI SPA100, etc.) previously mounted on the car.
  • Connect the cable from the package to the mount.
  • Connect the PL259 plug from the package to the cable.
  • Connect the PL259 plug to a CB radio.
  • Test the SWR in an open area using a reflectometer. In some cases it may be necessary to raise or shorten the wire to get an optimal SWR value.
    For maximum performance it is recommended that this procedure, called calibration, be performed by authorized personnel with special equipment.

Technical specifications:

Frequency 26 – 28 MHz
SWR ≤ 1.2:1
Impedance 50 Ohm
Maximum power 250 W continuously
Whip length 54 cm
Whip material Stainless steel
RG58 cable 4 m
Connector PL259

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals