DOMUS Lighting MIRROR-10 Wall Vanity Picture Light Installation Guide
- June 12, 2024
- DOMUS LIGHTING
Table of Contents
**DOMUS Lighting MIRROR-10 Wall Vanity Picture Light Installation Guide
**
MIRROR-10
| Variant | Item No | Description |
|---|---|---|
| 12001 | MIRROR-10-BLK | **10W Vanity light, black finish. Trio colour |
technology.
12003| MIRROR-10-CHR| 10W Vanity light, chrome finish. Trio
colour technology.
12005| MIRROR-10-SCHR| 10W Vanity light, satin chrome finish.
Trio colour technology.
12007| MIRROR-10-WHT| 10W Vanity light, white finish.
Trio colour technology.**
Thank you for purchasing your new LED MIRROR-10, Please take the time to read and understand the instruction sheet below. Failure to do so may void warranty.
Specifications
Voltage:| 240V AC| Lumen (±5%):| Warm White 3000K – 1040lm
Neutral White 4000K – 1110lm White 5700K – 1180lm| Dimmable:| No
---|---|---|---|---|---
Power:| 10W| Beam Angle:| 120°| Operating Temp:|
-20°C~45°C
IP Rating:| IP40| CCT:| 3000K – 4000K – 5700K
(Switchable)| |
CRI:| ≥80| Lifespan:| 50,000hrs| |
Assembly Instructions
-
Remove from box
-
Press the hasp to take out the bracket
-
Knock-in the plastic anchor into the wall. Fix bracket with screw into the wall
-
Remove the link pressing clip, connect the wires correspondingly
-
Fix the lamp to the bracket
-
Slide the preferred CCT before turning on the lamp.
-
Switch on
Note:
- -The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>