PNI 288 Central Locking With 2 Remote Controls User Manual
- June 9, 2024
- PNI
Table of Contents
PNI 288 Central Locking With 2 Remote Controls User Manual
OPERATING INSTRUCTIONS
-
Lock doors: press the key on the remote, warning lights will blink once and the doors will be locked.
-
Unlock doors: press the key on the remote, warning lights will blink twice and the doors will unlock.
-
Car locate: when the door are locked, press the key on the remote to locate the car in a parking lot, warning lights will blink 5 times and doors will remain locked.
-
Remote trunk release: press the key on the remote and the trunk will unlock or pop open. (if the car has the option)
-
Timing options:
- a) Position 1 means 0.5 seconds for electric central locking system.
- b) Position 2 means 3.5 seconds for pneumatic central locking system.
Factory setting is position 1.
-
Memorising a remote:
- a) Press the programming button on the command unit, warning light will turn on, then press a key on the remote to memories the remote, warning lights will turn of to confirm.
- b) Repeat the procedure for every other remotes (maximum 6 remotes)
-
Delete remotes: press the programming button on the command unit for 3 seconds, warning lights will blink 5 times to confirm deleting all the remotes.
Technical specifications:
- Power supply: 12VDC
- Communication frequency: 433MHz
- Transmission power: 10mW
- Operating temperature: -26°C ~ +80°C
- Dimensions: 164 x 63 x 90 mm
- Weight: 270 g
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that Car central locking system PNI 288 complies
with the RED Directive 2014/53/UE. The full text of the EU declaration of
conformity is available at the following Internet address:
https://www.mypni.eu/products/2722/download/certifications
CONNECTION DIAGRAM
OPERATING MODES
-
F1: Alarm output
-
F2: Negative trigger
-
F3: Positive trigger
-
F4: Positive/Negative trigger
-
F5: pneumatic Lock
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>