SPRACHT HS-OTE-Q Zum Over The Ear BT Headset User Guide
- June 14, 2024
- SPRACHT
Table of Contents
- SPRACHT HS-OTE-Q Zum Over The Ear BT Headset
- IMPORTANT SAFETY INFORMATION
- PRODUCT OVERVIEW
- CHARGING
- POWER ON/OFF AND PAIRING
- FUNCTIONS
- PAIRING THE HEADSET AND THE DOCK
- HEADSET SPECIFICATIONS
- FEDERAL COMMUNICATION COMMISSION STATEMENT
- WARRANTY
- CONTACT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SPRACHT HS-OTE-Q Zum Over The Ear BT Headset
Thanks for purchasing the Zurn Over-the-Ear Headset. Please read this guide to get maximum use of the headset and dock.
IMPORTANT SAFETY INFORMATION
- Charge the battery to full before using it for the first time.
- Keep the headset dry and avoid damp locations to prevent damage to the internal circuitry.
- The headset is not sweat proof so avoid using it during very active exercise.
- Clean the headset before putting it into the charging base to prevent corrosion on the contacts.
- Keep the product away from direct sunlight and excessive heat.
- High temperatures shorten the life of electronic devices, destroy the battery and may warp certain plastic parts.
- Excessive cold may also damage the circuit board.
- Don’t try to repair or disassemble the product you may damage the product and void the warranty.
- Try not to drop it on hard surfaces to avoid damage to the internal circuitry.
- Avoid using harsh chemicals or cleaners. Don’t scratch the surface with anything sharp.
- Even if you’re not using the headset or dock, please charge it to full at least 3 times a month to maintain battery life.
- If your product isn’t functioning properly, return it to the where you bought it, if it’s within their return period.
- Otherwise, please review our return policy at the end of this guide.
PRODUCT OVERVIEW
- LED Indicator
- Earhook
- Second mic
- MFB button
- Eartlps
- Speaker
- HS charging contacts
- Microphone
- Charging contacts
- Call mute
- Volume +
- Volume-
- Charging dock powerplay/ pause
- Type C charge port
CHARGING
- Headset: Place the headset in the charging dock, checking you have a solid connection. The red LED will turn on when the headset is charging. Charging takes about 1.5 hrs.
- Red LED on: Charging
- Red LED off: Charge complete
- Red LED flashing 2x every 10 sec: Battery low, charge
- Note: When the charging dock is not charging the headset in the idle state, the LED is white or off-white. When the headset is placed in the dock, the LED in the charging base will be off. After taking the headset out of the charging dock, the charging dock indicator will light up; if the dock is not used for a long time, it will enter sleep mode.
- Charging Dock: If you put the headset in the charging dock and the red LED flashes once every 2 sec, it means the charging dock battery is low. If the charging dock LED is off and isn’t charging the headset, the dock battery is out of charge. You need to charge the charging dock:
- Using USB cable:
- Plug the type-c charging cable into the dock’s charging port.
- Plug the USB cable into a USB port of PC or a 5Volt USB charger.
- Red LED on: Charging
- Red LED off: Finished charging
- Charging should be completed in about 2 hours.
- If the headset is in the charging dock, it can charge the headset at the same time as the base.
- Note: The battery is recyclable.
Batteries should not be exposed to excessive heat. Please make sure the charging jack is dry before charging.
POWER ON/OFF AND PAIRING
- If the headset is in the charging dock, it will turn on automatically when taken off the dock.
- If the headset is not in the dock and is powered off, press MFB button for about 3s until the blue LED flashes and the headset says “Power on”. Release the MFB; the headset is in the “Power on” mode.
- Pairing: In the off state, press and hold the function button for about 5 seconds, release it when you see the red and blue lights flash alternately, and the headset prompts “Pairing”.
- With the headset in pairing mode, open the Bluetooth® function in your device, phone/computer/tablet, and look for HS-OTE-Q and choose it. After the pairing is successful, the headset will prompt ‘Connected’.
- The headset automatically powers off when placed in the charging dock.
- To manually power off the headset, press the MFB button about Ss; you will hear “Power off”.
- Note: The headset will switch to standby mode if disconnected from your device (blue LED flashes once every 2 seconds), and will power off after 5 minutes to save power.
- If the headset is not paired with any device after 2 minutes, it will shut down.
PAIRING TO MULTIPLE DEVICES
- With the headset in pairing mode, pick one of the numbers on the dock and press for 3s, ie. number 1.
- Enter the pairing your mode in your device, phone/computer/tablet, and choose HS-OTE-Q. That number on the dock represents your device, such as number 1 is phone.
- When the white light on the dock flashes, release the button to connect to another Bluetooth® device.
- To pair more devices: With the headset in pairing mode, pick a different number on the dock, ie. 2, andpress it for 3s.
- Enter the pairing mode in your device, phone/ computer/tablet, and choose HS-OTE-Q. That number on the dock represents your device, such as number 2 is tablet.
- You can have up to 4 devices stored in the dock.
- You can switch between devices by pressing the button on the dock for 1.5s. So if number 1 is phone, as in the example above, and you want to switch to the tablet on number 2, press the number 2 on the dock for 1.5s and your headset will now be connected to your tablet and not your phone.
- Note: when the headset is connected to an iOS device, the headset battery status will be displayed on the device. When the headset is low on power, the battery indicator will turn red and show a depleted battery icon.
- The headphone will also give an audio prompt to charge your headset.
FUNCTIONS
FUNCTIONS WHILE PLAYING MUSIC
Function | On Headset | On Dock |
---|---|---|
Pause | click MFB | click power button |
Play | click MFB | click power button |
Volume+ | N/A | click + button |
Volume – | N/A | click – button |
FUNCTIONS WHILE CALLING
Function | On Headset | On Dock |
---|---|---|
Call cancel | click MFB x1 | click power button x1 |
Call reject | click MFB x2 | N/A |
Answer | click MFB x1 | click power button x1 |
End Call | click MFB x1 | click power button x1 |
Volume+ | N/A | click + button |
Volume – | N/A | click – button |
Voice Assist | click MFB x3 | N/A |
Mute | press MFB 2s | click mic mute button |
LED INDICATORS FOR HEADSET
Function | Color | Pattern |
---|---|---|
Pairing w/device | Red & Blue | Flash fast |
Pairing w/dock | Red & Blue | Flash fast |
Connected | Blue | Flash 2x every 10s |
Disconnected | Blue | Flash 1x every 5s |
Low battery | Red | Flash 2x every 10s |
LED INDICATORS FOR DOCK
Function | Color | Pattern |
---|---|---|
Idle | White | |
Connected w/device | White | On solid |
HS Connected to device | White | Flash slow |
Charging | Red | On solid |
Charge complete | Red | Off |
PAIRING THE HEADSET AND THE DOCK
If for some reason the headset and dock stop being connected, follow this procedure to reconnect them.
- Turn on the headset and the dock separately.
- Clear the pairing list (1 to 4): Put the headset into the dock to charge. Quickly press the headset MFB button 5 times. The headset LEDs flash red and blue quickly, and the dock’s 4 lights will flash at the same time. The headset and the dock will automatically connect.
FACTORY RESET
- Put the headset into the dock for charging. Quickly press the headset MFB 5 times: the headset red and blue LEDs flash quickly, and the 4 dock LEDs flash at the same time. The headset and the base will then automatically connect.
- NOTE: After factory reset, the paired list of Bluetooth® devices will be deleted. The headset will not automatically reconnect to the devices after turning on.
- After factory reset, when the headset turns on again, it will automatically enter the pairing mode (red and blue LEDs flash fast).
HEADSET SPECIFICATIONS
- Bluetooth version: 5.0 Qualcomm QCC3020 Chipset
- Wireless Range up to 30M (98′)
- Pairing Name HS-OTE-Q
- Battery Capacity Headset 9 hr, Dock 54 hr
- Mic Dual Noise Reduction
- Microphone Sensitivity -38db ± 3dB
- Frequency Range 2.4Hz – 2.435 GHz
- Multipoint Multiple device connection
- Speaker Frequency 20Hz – 20KHz
- Speaker Sensitivity 118dB ± 3dB
- Supports A2DP, AVRCP, HFP, HSP, AAC
FEDERAL COMMUNICATION COMMISSION STATEMENT
Interference Statement This device complies with Part 15 of the FCC Rules.
Operation of this device is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulations. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can bedetermined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and the receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY
- Spracht warrants its products against defects or malfunctions in material and workmanship under normaluse and service, with the exceptions stated below.
- This warranty lasts for one year from the original date of purchase. Coverage terminates if you sell or otherwise transfer the product. In order to keep this warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying the product.
- Spracht shall (at its option) repair or replace a defective unit covered by this warranty, or shall refund the product purchase price.
- Repair, replacement with a new or reconditioned unit, or refund, as provided under this warranty, is your exclusive remedy. This warranty does not cover any damages due to accident, misuse, abuse, or negligence. Spracht shall not be liable for any incidental or consequential damages.
- Some states do not allow limitation or exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
- To make a warranty claim, the purchaser must obtain a return authorization number (RA) from Spracht (serial number and purchase date required), and then return the product to Spracht at purchaser’s expense.
- A copy of the original dated receipt or shipping document must accompany the product. To obtain a return authorization, see “Warranty” on our website at www.spracht.com, send an e-mail to support@spracht.com, or contact:
- Spracht, 974 Commercial Street, Suite 108 Palo Alto, CA 94303 USA
- For repair or replacement of a failed product, allow 4 to 6 weeks for processing and shipment. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CONTACT
- Spracht
- 974 Commercial Street, Suite 108
- Palo Alto, CA 94303
- www.spracht.com.
© Copyright 2023 Spracht®. All rights reserved. Spracht® and the logo, and Zorn Over-the-Ear Headset are trademarks and registered trademarks of Spracht®. Any other trademarks are properties of their owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>