GAMDIAS MARS M1 MID-TOWER PC CASE Installation Guide
- June 6, 2024
- GAMDIAS
Table of Contents
QUICK INSTALLATION GUIDE
MARS M 1
MID-TOWER PC CAS EM1
SPECIFICATIONS
| SERIES | ALUMINUM Series |
|---|---|
| Product Name | MARS M1 |
| Case Type | MID Tower |
| Dimension (L x W x H) | 402 x 210 x 475 mm |
15.8 x 8.3 x 18.7 inch
Chassis Dimension (L x W x H)| 360 x 210 x 458 mm
14.2 x 8.3 x 18 inch
Motherboard Support| ATX, Micro-ATX,Mini-ITX
Expansion Slots| 7
Material| SPCC , ABS , Tempered glass , Aluminum
Window| Left
Radiator Support| Top: 280 mm
Front: 280 mm
Rear: 120 mm
Fan Support| Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 3 x 140mm
Rear: 1 x 120mm
Pre-installed Fans| Rear: 1 x 120mm Fan
Pre-installed Control BOX| NO
Motherboard Sync| 5V 3-Pin Addressable Header
Drive Bays| 2 x 3.5″ or 2 x 2.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 2 x 2.5″
Clearance| CPU cooler height limitation: 160mm
VGA length limitation: 340mm
PSU length limitation: 170mm
I/O Port| USB 3.0 x1, USB 2.0 x2,
HD Audio x1, LED Control x1
EXPLODED VIEW & PARTS
PARTS
0. Chassis Body
1. Screw
2. Tempered Glass Side Panel
3. Right Side Panel
4. Top Dust Filters| 5. Anodized Aluminum Front Panel
6. LED Strips
7. IO Port
8. HDD Cage
9. Rubber Foot
---|---
ACCESSORY
| Figure | Parts Name | Qty | Used for |
|---|
|
Stand-off 4.75 x 6.5 x 10mm| 3| Motherboard
|
Screw #6 x 6 mm| 8| PSU
|
Screw #6 x 5 mm| 8| HDD
| Screw M3 x 5 mm| 26| 2.5″ HDD/Motherboard/ODD
| CableTie| 5| Cable Management
| Buzzer| 1| Motherboard Alarm
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis
Install the motherboard in the proper location and secure it with screws
PSU INSTALLATION
Place the PSU in the proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
| Top | 2 x 120mm or 2 x 140mm |
|---|---|
| Front | 3 x 120mm or 3 x 140mm |
| Rear | 1 x 120mm |
RADIATOR COMPATIBILITY
| Top | 280 mm |
|---|---|
| Front | 280 mm |
| Rear | 120 mm |
I/O PORTS
1. Power Button
2. Reset Button
3. USB 3.0
4. USB 2.0| 5. USB 2.0
6. Headphone
7. Mic
8. LED Control**¹** **²**
---|---
- Sync With Motherboard: Press and Hold the LED Control Button for 3 seconds.
- LED off: Press and Hold the LED Control button for 3 Seconds(if you have not installed the MB Sync).
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
