MONACOR HSE-300-SK Headband Microphone Instructions
- June 9, 2024
- MONACOR
Table of Contents
HSE-300-SK Headband Microphone
Instructions
HSE-300-SK Headband Microphone
HSE-300 / SK Bestell-Nr. • Order No. 0234080
HSE-310 / SK Bestell-Nr. • Order No. 0234120
HSE-330 / SK Bestell-Nr. • Order No. 0230140
HSE-340 / SK Bestell-Nr. • Order No. 1000026
THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE
AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY
Headband Microphone
These instructions are intended for users without any specific technical knowledge. For model HSE-300/SK, however, technical knowledge is required for soldering on a connector. Please read these instructions carefully prior to operation and keep them for later reference.
Applications
This headband microphone is designed for use with a pocket transmitter of a wireless system. It is ideally suited for vocal sound and speech applications that require much freedom of movement, e. g. on stage. As an alternative to operation with a pocket transmitter, the microphone can be connected to an audio device, e.g. mixer, via a power supply adapter that provides the microphone with power.
Important Notes
The product corresponds to all relevant directives of the EU and is therefore marked with .
- The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity. The admissible ambient temperature range is 0 – 40 °C.
- For cleaning only use a dry, soft cloth; never use chemicals or water.
- No guarantee claims for the product and no liability for any resulting personal damage or material damage will be accepted if the product is not correctly used or not expertly repaired.
If the product is to be put out of operation definitively, dispose of the product in accordance with local regulations.
Operation
Place the windscreen onto the microphone. Put on the headband and place the microphone close to your mouth into a good position for talking. To do this, the microphone arm can be moved in all directions. Connect the microphone to a microphone input that supplies the operating voltage for the microphone (see Specifications). If this is not the case, use a power supply adapter.
Specifications
Type, pick-up pattern: ……………… back electret, cardioid
Frequency range: …………………….. 50 – 18 000 Hz
Sensitivity, impedance: ……………………… 2.3 mV/ Pa at 1 kHz, 2 k Ω
SPL max.: ……………………. 120 dB
Power supply: ……………………… 1.5 – 9 V
Weight w/o cable: …………………… 18 g
4.1 Connection
Subject to technical modification.
MONACOR INTERNATIONAL GmbH & Co. KG
• Zum Falsch 36
• 28307 Bremen
• Germany
Copyright© by MONACOR INTERNATIONAL. All rights reserved.
A-0449.98.05.05.2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>