SIMAUDIO 761 Power Amplifier Instruction Manual
- September 11, 2024
- SIMAUDIO
Table of Contents
761 Power Amplifier
“`html
Specifications
- Product Name: MOON 761 Power Amplifier
- Date: 2024-05-06
- Manufacturer: simaudio.com
Product Information
The MOON 761 Power Amplifier is a high-quality audio amplifier
designed to deliver exceptional sound performance.
Important Safety Instructions:
- Read the provided instructions carefully.
- Keep the amplifier away from water sources.
- Ensure proper ventilation and avoid blocking openings.
- Protect the power cord from damage.
Front Panel
The front panel of the amplifier includes controls for power,
volume, input selection, and display indicators for operational
status.
Rear Panel
The rear panel features input and output connectors, power
switch, and additional settings for customizing audio output.
Product Usage Instructions
Setup
-
Unpack the amplifier and place it on a stable surface.
-
Connect your audio sources to the appropriate inputs on the
rear panel. -
Connect the amplifier to your speakers using high-quality
speaker cables.
Powering On
-
Ensure the power switch on the rear panel is in the off
position. -
Plug in the power cord to a suitable power outlet.
-
Turn on the power switch and wait for the amplifier to
initialize.
Adjusting Settings
-
Use the volume control on the front panel to adjust the audio
output level. -
Select the desired input source using the input selector.
-
Refer to the user manual for advanced settings and
customization options.
FAQ
Q: Can I connect headphones directly to the amplifier?
A: No, the MOON 761 Power Amplifier is designed for use with
speakers and does not support headphone connections. For headphone
use, consider using a headphone amplifier.
Q: What is the warranty period for this product?
A: The warranty details can be found in the warranty card
included with the amplifier. Typically, it covers manufacturing
defects for a specified period from the date of purchase.
Q: How do I clean the amplifier?
A: Use a dry cloth to gently wipe the exterior of the amplifier.
Avoid using liquid cleaners or abrasive materials that may damage
the finish.
“`
761
power amplifier
2024-05-06
Contents
Important Safety Instructions…………………………………………………………………………………………………………3 Explore
new frontiers……………………………………………………………………………………………………………………5 Before getting
started …………………………………………………………………………………………………………………… 6 Install your MOON 761
……………………………………………………………………………………………………………….. 7 Get to know your MOON 761
………………………………………………………………………………………………………. 8
Front Panel …………………………………………………………………………………………………………………………………………………. 8 Rear
Panel ………………………………………………………………………………………………………………………………………………….. 9
Audio ………………………………………………………………………………………………………………………………….. 9 Functional
………………………………………………………………………………………………………………………….. 10 Personalize your MOON
761……………………………………………………………………………………………………….11 MOONLink
………………………………………………………………………………………………………………………………………………. 11 Troubleshooting
………………………………………………………………………………………………………………………… 12 Status
Indicator………………………………………………………………………………………………………………………………………….. 12
firmware update error ………………………………………………………………………………………………………………………….. 12
temperature protection …………………………………………………………………………………………………………………………. 12
voltage protection ……………………………………………………………………………………………………………………………….. 12 DC
protection …………………………………………………………………………………………………………………………………….. 12
Specifications ……………………………………………………………………………………………………………………………. 13 Technical
………………………………………………………………………………………………………………………………………………….. 13
2024-01-01
2|MOON 761
simaudio.com
Important Safety Instructions
1. Read these instructions.
11. Only use attachments and accessories specified by the manufacturer.
2. Keep these instructions.
12. The apparatus is heavy and requires two people to lift it. Exercise caution
3. Heed all warnings.
when maneuvering.
4. Follow all instructions.
13. Use only with the cart, stand, tripod, bracket, or table specified by
5. Do not use this apparatus near water.
the manufacturer or sold with the apparatus. When a cart is used,
6. Clean only with a dry cloth.
use caution when moving the cart/apparatus combination to avoid
7. Do not block ventilation openings. Install in accordance with the
injury from tip over.
manufacturer’s instructions.
14. Unplug this apparatus during lightning storms or when unused for long
8. Do not install near heat sources such as radiators, heat registers, stoves or
periods of time.
another apparatus that generate heat.
15. Refer all servicing to qualified service personnel. Servicing is required when
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
the apparatus has been damaged in any way such as when the power cord has
polarized plug has two blades with one wider than the other. A grounding-
been damaged; liquid has been spilled or objects have fallen into the
type plug has two blades and a third grounding prong. The wide blade or the
apparatus; or the apparatus has been exposed to rain or moisture, does not
third prong is provided for safety. If the provided plug does not fit into the
operate normally, or has been dropped.
outlet, consult an electrician to replace the obsolete outlet.
16. No naked flame sources, such as candles, should be placed on the apparatus.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptables, and the point where they exit from the apparatus.
Unplug mains cord during transportation.
WARNING:
TO REDUCE THE RIST OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with the arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Marking by the “CE” symbol (shown right) indicates compliance of this device
with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive)
standards of the European Community.
Waste from Electrical and Electronic Equipment (WEEE): This equipment must be
sent to a separate collection facility for the recovery and recycling of
electrical and electronic waste wherever dedicated facilities exist. WEEE
regulations aim to contribute to sustainable production and consumption,
addressing environmental and other issues caused by the growing number of
discarded electronics. The symbol for the separate collection of electrical
and electronic equipment indicates that this product should not be discarded
as unsorted waste.
Hot Surface The side panels are heat sinks, which could become dangerously hot
while the device is in operation. Caution: Do not touch
simaudio.com
3|MOON 761
1. ALWAYS disconnect your entire system from the AC mains before 6. NEVER operate the unit with any covers removed. There are no user-
connecting or disconnecting any cables, or when cleaning any component. To
serviceable parts inside. An open unit, especially if it is still connected to an
completely disconnect this apparatus from the AC mains, use the rocker
AC source, presents a potentially lethal shock hazard. Refer all questions to
switch on the rear panel or disconnect the power supply cable from the AC
authorized service personnel only.
receptacle.
7. NEVER wet the inside of the unit with any liquid. If a liquid substance does
2. The unit must be terminated with a three-conductor AC mains power cord,
enter your unit, immediately disconnect it from the AC mains and take it to
which includes an earth ground connection. To prevent shock hazard, all three
your MOON Partner for a complete check-up.
connections must ALWAYS be used. Connect the unit only to an AC source 8. NEVER spill or pour liquids directly onto the unit.
of the proper voltage; both the shipping box and rear panel serial number label 9. NEVER block air flow through ventilation slots or heatsinks.
will indicate the correct voltage. Use of any other voltage will likely damage 10. NEVER bypass any fuse.
the unit and void the warranty.
11. NEVER replace a fuse with a value or type other than those specified.
3. ALWAYS connect the unit only to an AC source of the appropriate voltage. 12. NEVER attempt to repair the unit. If a problem occurs, contact a MOON
Both the shipping box and rear panel serial number label indicate the correct
Partner.
voltage. Incorrect voltage could damage the unit and void the warranty.
13. NEVER expose the unit to extremely high or low temperatures.
4. AC extensions cords are NOT recommended for use with this product. The 14. NEVER operate the unit in an explosive atmosphere.
mains plug of the power supply cord shall remain readily accessible.
15. ALWAYS keep electrical equipment out of reach of children.
5. NEVER use flammable or combustible chemicals for cleaning audio 16. ALWAYS unplug sensitive electronic equipment during lightning storms.
components.
17. WARNING: Do not expose batteries or battery pack to excessive heat such
as sunshine, or fire or the like.
4|MOON 761
simaudio.com
Explore new frontiers
The landmark North Collection represents the culmination of years of research
and development in the fields of audio, electronics, materials, and
manufacturing processes. Its exciting new look is surpassed only by
improvements in performance made possible by the passionate team of Simaudio
engineers and technicians dedicated to delivering an uncompromised music
listening experience. With the purchase of this MOON product, you join an
elite group of music lovers around the world who expect the absolute best
performance and build quality from products in any class.
Get ready for the performance of a lifetime.
simaudio.com
5|MOON 761
Before getting started
Carefully remove the unit from its packaging. Visually inspect it, and in the
case of damage, report it to your MOON Retailer immediately.
The packaging materials were designed to protect this product while in
transit. Store these materials in a dry location for the duration of the
warranty period.
The information contained in this Manual is subject to change without notice.
The most recent version is available at simaudio.com/guides-downloads.
The MOON 761 includes:
· Quick Start Guide · Power Cable · Ethernet Cable · Warranty Registration
Card (Canada & USA only)
Note the serial number of your MOON 761 for future reference.
6|MOON 761
simaudio.com
Install your MOON 761
Consider the location and environment of the device carefully. Set it upon an
open, stable, and flat surface. The device requires sufficient space above and
around it to adequately disperse the heat it generates. Maintain a minimum gap
of 5 cm (2″) around the sides and 10 cm (4″) above of the unit to enable
airflow. When stacking multiple units, install MOON Bridges (sold separately)
between them.
The performance of this device will continue to improve during the first 100
hours of listening.
simaudio.com
7|MOON 761
Get to know your MOON 761 Front Panel
Standby toggles the device between active and inactive modes when the device is powered on
Status Indicator indicates the status of the device with colour-coded notifications
white solid white pulsating violet pulsating See Troubleshooting section for more information.
normal operation powering up firmware update
8|MOON 761
simaudio.com
Rear Panel
Audio
RIGHT/LEFT CHANNEL SPEAKER OUTPUT +/ binding posts for connecting
loudspeakers Insert banana pins through the holes in the extremities of the
barrels or unscrew the barrels to expose a gap underneath for spades and bare
wire contacts. BALANCED INPUT differential (XLR) connection for a balanced
preamplifier UNBALANCED INPUT single-ended (RCA) connection for a preamplifier
without balanced outputs BAL./UNBAL. switch for activating either the balanced
or the unbalanced inputs AC/DC COUPLING switch to enable the input to block DC
signals AC coupling is useful with preamps suspected of outputting DC (due to
age or design) or if the amplifier frequently enters DC protection mode. MODE
STEREO/MONO switch for bridging the two channels together as a monoblock
· For stereo operation, connect the positive (+) SPEAKER OUTPUT to the
positive loudspeaker terminals and the negative () SPEAKER OUTPUTS to the
negative loudspeaker terminals.
· For mono operation, use the LEFT CHANNEL INPUT. Connect the positive (+)
binding post on the LEFT CHANNEL to the positive loudspeaker terminal. Connect
the positive (+) terminal on the RIGHT CHANNEL to the negative loudspeaker
terminal.
simaudio.com
9|MOON 761
Functional
FUSE magazine containing a power supply fuse
Please appreciate that while some users may report improvements in the
performance of their audio equipment when original parts are replaced with
after market parts, MOON cannot guarantee the proper functioning of its
products under such conditions. Our engineers have ensured that the original
fuse should protect your device from catching fire due to electrical
calamities. All security, quality, and performance testing, as well as
standards certification, is performed with specific components, and any
modification from the original design may void its warranty.
POWER switch for toggling the device on [I] and off [O] With the power switch
on, the unit may be toggled in and out of Standby using the button on the
front panel, a remote control, the MiND Controller, or by MOONLink. The unit
may require up to a minute to connect to the network. For best performance,
the device should remain powered up and may be toggled into Standby when not
in use. It should be powered down during extended absences by disconnecting
the power cable. Always power on the preamplifier before the power amplifier.
Always power off the power amplifier before the preamplifier.
AC INPUT for connecting the power cable
NETWORK network (RJ-45) connections for Ethernet cables
· for MOONLink functionality with compatible MOON products · for extending the
network to an additional device (eg, another 761, a NAS device, or a TV) · for
connecting the device to a network router
12V TRIGGER mini-jack (TS) connection for synchronizing Standby behaviours
across multiple devices
· Use 12V TRIGGER IN to connect a preamplifier. · Use 12V TRIGGER OUT to
daisy-chain this unit to the 12V TRIGGER IN on an additional power amplifier
(eg,
when using two units as monoblocks).
STDBY MODE switch for powering down some of the electronics while in Standby
· Select REG (recommended) to reduce the amount of time necessary to reach
optimal playing conditions. · Select LOW to reduce energy consumption when not
in use.
10 | M O O N 7 6 1
simaudio.com
Personalize your MOON 761 MOONLink
MOONLink technology makes MOON products more intelligent.
A single button press can trigger automated behaviours and simultaneously
operate multiple devices over a network in a symbiotic MOONLink Group.
MOONLink simultaneously toggles Standby and can adjust display brightness for
all devices in the Group, while enabling volume control and automatic input
selection of specific devices in the Group.
Use the Setup menu on any complementary model from the North Collection to add
this unit to a MOONLink Group.
· MOONLink Group permits the customization of a Group. o Name identifies a
device within the Group. o Group ID assigns a Group number to a Device.
Assigning the same ID to other devices joins them together as a Group. o
Status lists information about the device. o Firmware verifies the firmware of
the device and updates it when necessary.
· Available Devices lists devices on the network that could be added to a
Group. Holding the Standby button on the front panel for two seconds
automatically toggles all the devices in the MOONLink Group into Standby.
simaudio.com
11 | M O O N 7 6 1
Troubleshooting
Status Indicator
If typical operation is disrupted, the status indicator may blink to signal a
problem. A preamplifier in the MOONLink group will simultaneously display the
corresponding message on its LED display.
violet red
orange orange / green
yellow
blinking blinking blinking
blinking
firmware update error temperature protection voltage protection blown fuse DC protection
firmware update error Normally, the device recovers automatically from a
firmware update error. If the problem persists…
1. Verify that the device is connected to the network and that the network is
accessing the Internet. 2. Wait 30 minutes. 3. If the device continues to
indicate a firmware update error, contact support@simaudio.com.
temperature protection If a device overheats, it could return to normal
operation after a period of cooling down.
1. Power down the device using the rear rocker switch. 2. Wait 10 minutes. 3.
Consider the location and environment of the device carefully. Make
adjustments to decrease the temperature and
increase airflow around the device. 4. Power up the device and resume normal
operation. 5. If the device continues to indicate temperature protection,
contact support@simaudio.com.
voltage protection If a device has a voltage issue, it will most likely
require service.
1. Power down the device using the rear rocker switch. 2. Wait 60 seconds. 3.
Power up the device and resume normal operation. 4. If the device continues to
indicate voltage protection, contact support@simaudio.com.
DC protection The device will shut down if it detects DC at its input,
internally, or at its output. To determine the source of the issue…
1. Power down the device using the rear rocker switch. 2. Disconnect all
cables from the device. 3. Wait 60 seconds. 4. Reconnect only the power cable.
5. Power up the device.
a. If the device continues to indicate DC protection, contact
support@simaudio.com. b. If not… 6. Reconnect one loudspeaker. a. If the
device indicates DC protection, there is an issue with that loudspeaker or its
cable. b. If not, connect the other loudspeaker. c. If the device indicates DC
protection, there is an issue with that loudspeaker or its cable. d. If not…
7. Reconnect one source device. a. If the device indicates DC protection,
there is an issue with that device or its cable. b. If not, continue this
process of elimination.
12 | M O O N 7 6 1
simaudio.com
Specifications
Technical
Output Power (Stereo 8 ) 200 W
Output Power (Stereo 4 ) 400 W
Output Power (Mono 8 ) 600 W
Input Sensitivity 1.1 V Input Impedance 47 k
Gain 31 dB
Frequency Response 2 Hz 100 kHz (+0 dB / 3 dB)
Crosstalk 116 dB
Total Harmonic Distortion @ 1 W 0.002%
Total Harmonic Distortion @ 200 W 0.001%
Intermodulation Distortion 0.002%
Signal-to-Noise Ratio 117 dB
Damping Factor 800
Power Consumption (Idle) 55 W
Power Consumption (Full Power Standby) 50 W
Power Consumption (Low Power Standby) 1.25 W
Shipping Weight 36kg / 79 lbs
Dimensions (L x H x D) 48.1 cm x 14.0 cm x 44.5 cm / 18.95″ x 5.53″ x 17.53″
Fuse (120 V / 240 V) F 10A H 250V 3AG / F 6A H 250V 3AG
simaudio.com
13 | M O O N 7 6 1
References
- High End Audiophile Amplifiers And Sound Systems | MOON - Simaudio
- Guides & Downloads | MOON - Simaudio
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>