PHILIPS BGS151 LED6-730 Essential SmartBright Solar Landscape Instruction Manual
- September 14, 2024
- Philips
Table of Contents
PHILIPS BGS151 LED6-730 Essential SmartBright Solar Landscape
Specifications :
- Type Number/Modelo: BGS151 LED
- Flux: 560lm – 600lm
- Battery type: Ternary lithium
- Battery parameter: 3.7V/2.6Ah
- PV parameter: 5V/1.9W
- Remote type: Infrared
- Remote distance: 1.5m
- IP Rating: IP65
Product Usage Instructions
Mounting Instructions:
Follow the provided mounting instructions to securely install the solar
landscape light in the desired location.
Remote Controller Function:
- Press ‘ON’ during charging to light up the luminaire for 10 seconds, then it will turn off automatically and return to normal working mode.
- Press ‘OFF’ to put the luminaire in standby mode, emitting no light during the night. It will automatically turn on the following night.
- Sensor Mode
The luminaire will detect sunset and automatically turn on with different brightness modes based on battery level and motion detection.
High Bright Mode:
- Activated after 3 hours of full battery charge
- Intensity increases to 100% for 15 seconds when motion is detected
Medium Bright Mode:
- Activated after 6 hours of full battery charge
- Intensity increases to 100% for 15 seconds when motion is detected
Low Bright Mode :
- Activated after approximately 12 hours of full battery charge
- Intensity increases to 100% for 15 seconds when motion is detected
Non-Sensor Mode :
Press ‘ON’ while in working mode to turn off the motion sensor function. Press
‘ON’ again to reactivate the motion sensor function.
FAQ :
-
Q: How do I know which mode the luminaire is in?
A: The luminaire will operate in different brightness modes based on the battery level and motion detection. Check the user manual for detailed information on each mode. -
Q: Can I adjust the sensitivity of the motion sensor?
A: The sensitivity of the motion sensor is preset and cannot be adjusted manually. -
Q: What should I do if the luminaire does not turn on automatically at night?
A: Ensure that the solar panel is receiving adequate sunlight during the day to charge the battery. Check the connections and position of the luminaire for optimal performance.
Essential SmartBright Solar Landscape BGS151
Mounting instruction
Type Number| Flux| Battery type| Battery parameter|
PV parameter
|
Remote type
| Remote distance| CCT| Working temperature
---|---|---|---|---|---|---|---|---
BGS151 LED6/730 Wall S Solar| 560lm| Ternary lithium| 3.7V/2.6Ah| 5V/1.9W|
infrared| ≤1.5m| 3000K| -10~50℃
BGS151 LED6/740 Wall S Solar| 600lm| Ternary lithium| 3.7V/2.6Ah| 5V/1.9W|
infrared| ≤1.5m| 4000K| -10~50℃
BGS151 LED6/765 Wall S Solar| 600lm| Ternary lithium| 3.7V/2.6Ah| 5V/1.9W|
infrared| ≤1.5m| 6500K| -10~50℃
BGS151 LED6/730 Bollard SL Solar| 560lm| Ternary lithium| 3.7V/2.6Ah| 5V/1.9W|
infrared| ≤1.5m| 3000K| -10~50℃
BGS151 LED6/740 Bollard SL Solar| 600lm| Ternary lithium| 3.7V/2.6Ah| 5V/1.9W|
infrared| ≤1.5m| 4000K| -10~50℃
BGS151 LED6/765 Bollard SL Solar| 600lm| Ternary lithium| 3.7V/2.6Ah| 5V/1.9W|
infrared| ≤1.5m| 6500K| -10~50℃
Type/Tipo| L| L1|
---|---|---|---
BGS151 LED Wall S Solar| 107| 155| 130
BGS151 LED Bollard SL Solar| 113| 155| 500
Remote Controller Function
- Press the ‘ON’ during charging, the luminaire will light up for 10 seconds and then turn off automatically, returning to normal working mode.
Press the ‘OFF’, the luminaire goes into standby mode and does not emit any lighting output during the night. The luminaire will automatically turn on the following night.
Sensor mode
- The Luminaire will detect sunset and turn on automatically with High bright mode and remains on until the battery is low. If motion is detected, the intensity will increase to 100% for 15 seconds, which typically occurs after 3 hours in the state of the full charged battery.
- The Luminaire will detect sunset and turn on automatically with Medium bright mode and remains on until the battery is low. If motion is detected, the intensity will increase to 100% for 15 seconds, which typically occurs after 6 hours in the state of the full charged battery.
- The Luminaire will detect sunset and turn on automatically with Low bright mode and remains on until the battery is low. If motion is detected, the intensity will increase to 100% for 15 seconds, which typically occurs after approximately 12 hours in the state of the full charged battery.
Non-Sensor mode
- Press the ‘ON’ while the luminaire is in working mode, the motion sensor function will turn off.
- (Press the ‘ON’ again to reactivate the motion sensor function)
- The luminaire will detect sunset and turns on automatically with High bright mode and remains on until the battery is low, which typically occurs after approximately 3 hours in the state of the full charged battery.
- The luminaire will detect sunset and turns on automatically with Medium bright mode and remains on until the battery is low, which typically occurs after approximately 6 hours in the state of the full charged battery.
- The luminaire will detect sunset and turns on automatically with Low bright mode and remains on until the battery is low, which typically occurs after approximately 12 hours in the state of the full charged battery.
- Note
- Before installation, please press the switch button on the luminaire to activate the luminaire, this will bring out the luminaire from sleep and activate remote control function.
- To force the luminaire to sleep mode (say for storage purpose), please press the switch button on the luminaire.
- The factory default working mode for this luminaire is ‘M’ (Medium bright mode) with motion sensor function.
- The remote control comes with a CR2025 button battery which is expected to be replaced one year from the manufacturing date. Lighting output is not constant output, it will be gradually dimming down along with battery capacity lower.
Application Notes:
Try to install in a sunny place that is not shaded by trees, building, walls etc. so that the Solar panel receive maximum Sunlight for charging the battery. Shading or rainy day, light on duration time will be less.
- Charge the product under Sunlight for 8 hours before first use.
- After installation, the working modes can be set from infrared remote controller.
- This product does not need any external electrical connection. It works 100% on solar energy.
- Detection of Sunset is based on light intensity falling on solar panel.
- The battery backup time will reduce if the ambient temperature is < O degree Celsius.
- The product is designed for use on Landscape, Walkway, Garden, Lawns, etc.
- This product contains lithium batteries. lt is important to note that if the battery is not used for a long period of time 11months from date of manufacturing). Please refer to the date of manufacturing on the package label and product label. lt may be in some state of over-discharge due to its self-discharge characteristics. Over-discharge may degrade batter performance, and the warranty shall be void.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire shall be replaced.
Signify Luminaires (Shanghai) Co., Ltd 2nd Floor, Building 1, No. 2555,
Hechuan Road, Minhang District, Shanghai, 200233, China
Philips and the Philips shield emblem are registered trademarks of Koninklijke
Philips N. V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>