WATTECO 50-70-016 State Report and Output Control Sensor User Guide
- June 9, 2024
- WATTECO
Table of Contents
WATTECO 50-70-016 State Report and Output Control Sensor
Start
Provision the device on your LoRaWAN® network with the keys available on a secure platform
ON
OFF
Video :
ON – OFF
**Connectors
**
Wire Colour
- Green
- White
- Brown
- Pink
- Blue
- Yellow
Connector
- Input 1+
- Input 1-
- Input 2+
- Input 2-
- Input 3+
- Input 3-
Characteristics of the 3 inputs:
- Impedance: 1MΩ
- Tension : 0-30Vdc
- Delivered current: 3.5 μA
- Signal frequency max: 0-100 Hz
Wiring (20-26 swg stranded length):
- Depending on the type of output
Isolated dry contact output
NPN open collector output
- Compatible with 3V voltage and a 3uA current.
- Others, need to connect a compatible external power supply and a resistor to limit the current.
Installation Setting up
Opening / Closure
Wall mounting
Please note that after installation of the kit, the protection rating of the housing will change to IP50.
Radio propagation
Characteritics
**Reference| 50-70-160| 50-70-039| 50-70-016|
50-70-087
---|---|---|---|---
Class| A| A| A| C
Power Level| +14 dBm| +14 dBm| +14 dBm| +14 dBm
Antenna| Internal| Internal| External| External
Casing materials| ASA / PC| ASA / PC| ASA / PC| ASA / PC
IP rating**| IP55| IP68| IP55| IP55
Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-016/50-70-087/ 50-70-160/50- 70-039 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download- center/
References
- support.watteco.com/
- Concepteur et fabricant de capteurs transmetteurs radio connectés IoT - WATTECO