WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive Area User Guide

June 1, 2024
WATTECO

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive Area User Guide

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive
Area User Guide

1 Recommendations for use

The use of accessories:
Installation, maintenance and use must only be carried out by personnel who are competent in the use of electrical equipment in explosive atmospheres as defined in EN 60079-14.
Any repair or modification is strictly prohibited without the written permission of Watteco.
Risk of electrostatic discharge: The user must implement any action to control the risks of electrostatic discharge, especially by cleaning the product only with a damp cloth.

USE ONLY SAFT TYPE LS17500 BATTERIES.
Only the use of accessories in accordance with the intrinsic safety parameters is permitted (see on pages 3-4)

FOR PRODUCTS WITH EXTERNAL ANTENNAS: USE ONLY PASSIVE 868MHZ ANTENNAS WITH 50 OHM IMPEDANCE, MAXIMUM PEAK GAIN OF +4DBI, NO EXPOSED BARE WIRE, MOULDED OR PACKAGED IN A POLYMER CASE.

2 Start

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive
Area User Guide - Start

https://www.watteco.fr/assistance/tutoriels-video/

3 Connectors

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive
Area User Guide - Connectors WATTECO
50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive Area User
Guide - Connectors WATTECO
50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive Area User
Guide - Connectors

4 Marking

The Toran’O / Pulse Sens’O sensors are certified according to the harmonised standards EN60079-0 ed. 6 and EN60079-11 ed.6 (EU Type Examination Certificate DEKRA 20ATEX0017 X)

WARNING – DO NOT CHANGE THE BATTERY IN EXPLOSIVE ATMOSPHERE – ONLY USE TYPE OF BATTERY SAFT LS17500 – POTENTIAL ELECTROSTATIC CHARGING HAZARD – INSTRINSIC SAFETY PARAMETERS FOR CONNECTORS – SEE INSTRUCTIONS WATTECO – 165 RUE MONTAGNE DU SALUT 56600 LANESTER – FRANCE

5 Setting up

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive
Area User Guide - Setting up WATTECO
50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive Area User
Guide - Setting up

6 Radio propagation

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive
Area User Guide - Radio propagation

For the sensor communicates correctly, the number of obstacles should be limited to avoid excessive radio attenuation.

7 Characteristics

WATTECO 50-70-150 Pulse Counting and Analog Measurements in AtEx 1 Sensitive
Area User Guide - Characteristicshttps://support.watteco.com/https://www.watteco.fr/assistance /centre-de-telechargement/

Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-123 / 50-70-152 / 50-70-124 / 50-70-150 / 50-70-229 / 50-70-228 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-center/

IoT device manufacturer

Thanks for choosing WATTECO devices

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

WATTECO User Manuals

Related Manuals