WATTECO 50-70-080 Modbus Class A or LoRaWAN Bridge User Guide
- June 4, 2024
- WATTECO
Table of Contents
50-70-080 Modbus Class A or LoRaWAN Bridge
User Guide
Start
**** Provision the device on your LoRaWAN® network with the keys available on
the secure platform.
Video : ON – OFF
https://www.watteco.fr/assistance/tutoriels-video/
Connectors
The 120Ω line termination jumper can be enabled or disabled at the user’s
discretion for proper RS485 bus communication.
Use a flexible cable with a sheath with a diameter between 2.5mm and 6.5mm and
single-stranded (or multi-stranded with crimp) 20-26AWG wires.
Hold the base(1) of the cable gland and slightly loosen the nut(2).
Thread the cable, taking care not to damage the seal(3).
Strip the cable for about 10cm. Adjust the cable and retighten the nut.
Installation Setting up
Please note that after the installation of the railDIN kit, the protection rating of the housing will change to IP50.
Radio propagation
Characteristics
| Reference | 50-70-080 | 50-70-109 |
|---|---|---|
| Class | A | C |
| Power Level | +14 dBm | +14 dBm |
| Measures: | Modbus RS485 | Modbus RS485 |
| Antenne /Antenna | Internal | Internal |
| Casing materials | ASA/PC | ASA/PC |
| IP rating | IP55 | IP55 |
| --- | --- | |
| https://support.watteco.com/ | <https://www.watteco.fr/assistance/centre-de- |
telechargement/>
Watco represented by JC LE BLEIS declares that the radio equipment type 50-70-080 / 50-70-109 is in conformity with Directive 2014/53/EU (RED). The full text of the EU Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-center/
Thanks for choosing WATTECO devices
Documents / Resources
|
WATTECO 50-70-080 Modbus Class A or LoRaWAN
Bridge
[pdf] User Guide
Modbus Class B, 50-70-109, Modbus Class B 50-70-109, 50-70-080, Modbus Class A
or LoRaWAN Bridge, 50-70-080 Modbus Class A or LoRaWAN Bridge
---|---
References
- support.watteco.com/
- Concepteur et fabricant de capteurs transmetteurs radio connectés IoT - WATTECO