WATTECO 50-70-197 Acceler’O Acceleration Sensor User Guide
- June 3, 2024
- WATTECO
Table of Contents
WATTECO 50-70-197 Acceleration Sensor
Start
- Provision the device on your LoRa WAN® network with the keys available on the secure platform.
ON :
OFF :
Video :
ON – OFF
Installation
Setting up
Attention aimantde forte puissance (Pacemaker, Caution strong magnet (Pacemaker, pinched finger…)
- Carefully place the TAB on the horizontal metal surface
- Make sure the metal surface is flat and clean
Propagation Radio propagation
- Avoiding obstacles for better radio propagation.
- Check the radio coverage with the New ’O.
Characteristics
| Reference | 50-70-197 |
|---|---|
| Class | A |
| Power Level | +14 dBm |
| **Measures :** | Acceleration |
| Antenna | Interne / Internal |
| Casing materials | ASA UL94 HB |
| protection / IP rating | IP67 |
Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-197 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-center/
References
- support.watteco.com/
- Concepteur et fabricant de capteurs transmetteurs radio connectés IoT - WATTECO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>