WATTECO 50-70-201 Inclin’O Sensor User Guide

WATTECO 50-70-201 Inclin’O Sensor

Start

Provision the device on your LoRaWAN® network with the keys available on the secure platform.

Video

https://www.watteco.fr/ assistance/tutoriels-video/

Installation Setting up

double-face Default: double-sided pads

• Placer le boitier en position, presser fortement (~10kg).
• Finish cleaning the surfaces to be bonded with the 3M wipe supplied with the sensor.
• Place the double-sided pads (supplied with the sensor) on the back of the case.
• Place the case in position, and press down hard (~10kg).
• Rotate the 2 small covers of the housing to screw in the 2 magnets, inserting the lock washer under the screw head. Make sure the metallic surface is flat and clean.
• Rotate the 2 small covers on the enclosure to screw the collar brackets to the enclosure, inserting the lock washer under the screw head
• Pass the clamp through the slots in the clamp holder and around the post. Then tighten the clamp firmly.

Radio propagation

Characteristics

https://support.watteco.com/

Watco represented by JC LE BLEIS declares that the radio equipment type 50-70-201 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-

Thanks for choosing WATTECO devices

References

• support.watteco.com/
• Concepteur et fabricant de capteurs transmetteurs radio connectés IoT - WATTECO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>