REHAU RAUVOLET Metallic-Line Tambour Doors Installation Guide
- June 9, 2024
- REHAU
Table of Contents
**REHAU RAUVOLET Metallic-Line Tambour Doors Installation Guide
**
Parts List
Product Overview
Dimension
-
E9 / E23
-
E4 / S26
-
metallic-line 20 / 25
| |
---|---|---
17933101001| 17933201001
A| 1 x| –
B| 2 x| –
C| 1 x| 1 x
D| 2 x| 2 x
Product Assembly
E9 / E23, E4 / SE26 metallic-line 20 / 25 | RAUVOLET edelmatt |
---|---|
+X − | 0 − 150 mm |
−X 50 − 100 mm | 0 − 150 mm |
E9 / E23, E4 / SE26 metallic-line 20 / 25 | RAUVOLET edelmat |
---|---|
+X − | 0 − 150 mm |
−X 50 − 100 mm | – |
−Y 50 − 100 mm | 0 − 150 mm |
Safety information! As per DIN EN 14749, after final assembly the shutter must be set up so that, when opened at least 200 mm from the bottom edge of the cupboard, it does not move of its own accord. The cupboard manufacturer is obliged to pass this information on to finishers, fitters and end customers.
This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.
Customer Service
© REHAU Industries SE & Co. KG
Rheniumhaus
D-95111 Rehau
Germany
www.rehau.com/locations
References
- Conditions of Sale worldwide | REHAU
- REHAU TI Portal - Find specific technical information
- Conditions of Sale worldwide | REHAU
- Websites worldwide | REHAU Group