UNI-BRIGHT MN100075W MOON 1000 Led Surface Mounted Ceiling Light Instruction Manual

June 13, 2024
UNI-BRIGHT

MN100075W MOON 1000 Led Surface Mounted Ceiling Light
Instruction Manual

MN100075W MOON 1000 Led Surface Mounted Ceiling Light

UNI BRIGHT MN100075W MOON 1000 Led Surface Mounted Ceiling
Light

MN100075W White ∅1000 mm SMD LED 75W 3000K – 4000K 8000 lm
MN100075B Black ∅ 1000 mm SMD LED 75W 3000K – 4000K 8000 lm

Dali Driver included

Warning

WARNING !
To prevent electrical shock – Always switch off electricity supply before installation and maintenance.

Installation

Please follow the sequence of installation step by step

Surface Mount installation

UNI BRIGHT MN100075W MOON 1000 Led Surface Mounted Ceiling Light - Mount
installation

Guidance For Wattage(Current) Selection (For OSRAM & TRIDON IC driver only)

Diameter| Watt| Rated Current| LED Driver Current Selection by DIP-switch
| |
(I) 800| 47W| 350mA| Table I- Rated cutout power and| cure sets| Pin 1| Pin 2| ‘rated [main
i outlay%)
U mil IA| 350
70| IR| 590
70| 550
70
55W| 400mA| OFF| OFF| 350
Ungory| 217| 187| 150| 136
68W| 500mA| polio MI| 245| 28| 35| 383| OFF| ON| 400
P max 855| 77| 75| 75| 76
Ta It I| 50| 50| SO| 50
75W| 550mA| ON| OFF| 500
Tc it I| 75| 75| Is| 75
Line Current, nominala$230VmA| 370| 370| 370| 370
| Max Power Lora230VIW)| 6| 6| 6| 6| ON| ON| 550
Input Poweng230V IWI| 473| 59.| 83| 83
.1000| 100W| 250-700mA| Ready-for-use resistor between 300-700mA to set output current value (Please refer to Thionic I-SELECT 2 PLUG PRE / EXC for details)
Guidance for Wattage(Current) Selection (For MERRYTEK driver only)

Diameter| Watt| Rated Current| LED Driver Current Selection by DIP-switch
4) 800| 40W| 300mA| | Table 1-Rated output power and current sets| Pin 1| Pin 2| Pin 3| !rated [mA]|
i out mA| 300| 350| 450| 500| 550
| | | 300
46.9W| 350mA| U min(V)| 80| 80| 80| 80| 80
u max(V)| 330| 330| 266| 240| 219| ON| –| –| 350
P min(W)| 24| 28| 36| 40| 44| | ON| | 450
60.3W| 450mA
P max(W)| 99| 116.| 120| 120| 120
–| | ON| 500
Tarec)| 50| 50| 50| 50| 50
67W| 500mA
Tcrq| 80| 80| 80| 80| 80| ON
561| –
ON| ON
ON| 550
650
Line current, nominal@230V mA| 463| 540| 561| 561|
73.7W| 550mA| Max power lose0230V mA| 7.| 9.| 9| 9| 9
ON| ON| ON| 700
input power@230V mA| 106.| 124.| 129| 129| 129
(1) 1000| 100W| 300-700mA| Ready-for-use resister between 300-700mA to set output current value (Please refer to MERRYTEK DALI 2 Dimmable LED driver NO ISO/KL120C-PDii above for details)

Warning: DIP switch selection must ill comply with guidance, otherwise product will be overloaded!

Safety

• For indoor use only.
This fitting should only be installed in rooms where direct contact with water is impossible.
Luminaire not suitable for covering with insulating material.
IP40 • Protected against objects ≥ 1 mm. Not protected against water.
• Correct disposal of this product (electrical & electronical equipment waste)

  • The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Improper installation can result in serious injuries and/or damage to property.
  • For safety and guarantee reasons it is prohibited to make any modifications to the unit.

UNI-BRIGHT nv
Belcrownlaan 13-Q – 2100 Antwerpian Belgium –
T+32(0)3 6416140
www.unibright.be

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals