REHAU NEA Smart 2.0 Transformer Installation Guide
- June 6, 2024
- REHAU
Table of Contents
REHAU NEA Smart 2.0 Transformer Installation Guide
Safety Instructions and Product Conformity
Risk of life through electrical shock! The electrical installation must follow the applicable national standards and guidelines as well as any specific requirements of your local energy supplier. These instructions are intended for use by a qualified person who is holding an official certificate in one of the following professions:
electrician or electronics engineer.
Always read the instructions prior to commencing the installation. Connection
to the final power supply must only be carried out after the installation is
complete. Hereby, REHAU AG + Co declares that the radio equipment type Nea
Smart 2.0 is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is available at the
following internet address:
www.rehau.com/neasmart2
System Overview
Scope of Delivery
DIN Rail Installation
Wall Installation
Connection diagram
One Transformer can power 1 Base (12 actuators) and 1 R-Module (6 actuators). When using the U-Module the Transformer is needed only when the mixing circuit option is defined.
Drilling Jig
Electrical voltage! Danger to life!
The system is live.
- Prior to opening always disconnect from the mains and secure all components of the system in such a way that they cannot accidentally be switched on.
- Disconnect external voltages at the relay contacts and secure against unintended activation.
- Check for absence of voltage!
Additional information
http://www.rehau.com/neasmart2
This document is protected by copyright. All rights based on this are
reserved. No part of this publication may be translated, reproduced or
transmitted in any form or by any similar means, electronic or mechanical,
photocopying, recording or otherwise, or stored in a data retrieval system.
Our verbal and written advice with regard to usage is based on years of
experience and standardised assumptions and is provided to the best of our
knowledge. The intended use of REHAU products is described comprehensively in
the technical product information. The latest version can be viewed at
www.rehau.com/TI. We have no control over the
application, use or processing of the products. Responsibility for these
activities therefore remains entirely with the respective user/processor.
Where claims for liability nonetheless arise, they shall be governed
exclusively according to our terms and conditions, available at
www.rehau.com/conditions, insofar as
nothing else has been agreed upon with REHAU in writing. This shall also apply
for all warranty claims, with the warranty applying to the consistent quality
of our products in accordance with our specifications. Subject to technical
changes.
References
- Conditions of Sale worldwide | REHAU
- REHAU TI Portal - Find specific technical information
- REHAU North America
- REHAU Group | Engineering progress – Enhancing lives
- Conditions of Sale worldwide | REHAU
- NEA SMART 2.0 Manager | REHAU
- Szállítási és Fizetési Feltételek
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>