REHAU Nea Smart 2.0 R-Module 24 V Instruction Manual
- June 9, 2024
- REHAU
Table of Contents
REHAU Nea Smart 2.0 R-Module 24 V
Safety Instructions and Product Conformity
Risk of life through electrical shock! The electrical installation must follow
the applicable national standards and guidelines as well as any specific
requirements of your local energy supplier. These instructions are intended
for use by a qualified person who is holding an official certificate in one of
the following professions:
electrician or electronics engineer.Always read the instructions prior to
commencing the installation. Connection to the final power supply must only be
carried out after the installation is complete.Hereby, REHAU Industries SE &
Co. KG declares that the radio equipment type Nea Smart 2.0 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address:
www.rehau.com/neasmart2
System Overview
Scope of Delivery
Wall Installation
DIN Rail Installation
Electrical voltage! Danger to life!
The system is live.
- Prior to opening always disconnect from the mains and secure all components of the system in such a way that they cannot accidentally be switched on.
- Disconnect external voltages at the relay contacts and secure against unintended activation.
- Check for absence of voltage!
Diagrams
or
Electrical terminations
Solid cable
0,5-1,5 mm²
Multiple stranded cable
1,0-1,5 mm²
Freely configurable
-
A. Zone Bus
-
B. Digital Input 1
-
C. Zone 9-12
-
D. Relay 1
5 A, Class 2 -
E. Relay 2
5 A, Class 2 -
F. Fuse T2A
Additional information
This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.
Our verbal and written advice with regard to usage is based on years of
experience and standardised assumptions and is provided to the best of our
knowledge. The intended use of REHAU products is described comprehensively in
the technical product information. The latest version can be viewed at
www.rehau.com/TI. We have no control over the
application, use or processing of the products. Responsibility for these
activities therefore remains entirely with the respective user/processor.
Where claims for liability nonetheless arise, they shall be governed
exclusively according to our terms and conditions, available at
www.rehau.com/conditions, insofar as
nothing else has been agreed upon with REHAU in writing. This shall also apply
for all warranty claims, with the warranty applying to the consistent quality
of our products in accordance with our specifications. Subject to technical
changes.
954634 03.2022 © REHAU Industries SE & Co. KG, Rheniumhaus, 95111 Rehau
References
- Conditions of Sale worldwide | REHAU
- REHAU TI Portal - Find specific technical information
- REHAU Group | Engineering progress – Enhancing lives
- NEA SMART 2.0 Manager | REHAU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>