connex CX27A21DC FHD LED TV Instruction Manual
- June 4, 2024
- Connex
Table of Contents
FHD LED TV
Model CX27A21DC Instruction
Manual
Important Safety Instructions
Warnings and Precautions
To prevent any injuries, the following safety precautions should be
observed in the installation, use, servicing and maintenance of this
equipment.
Before operating this equipment, please read this manual completely, and keep
it for future reference.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Do not clean with strong chemical agents
-
The appliance is intended for household use only, and not for commercial or industrial use.
-
Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Care is required with the use of this apparatus in tropical climates. Do not use the appliance under temperatures over 40°C.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use the attachments/accessories specified by the manufacturer.
-
Use only with a stand, or bracket, specified by the manufacturer, or sold with the apparatus.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Do not operate the unit if it is not working normally or has been damaged in any way. Turn the unit off, unplug it from the power source and consult service personnel. Do not attempt to service this unit yourself.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Do not listen to headphones at high volumes; the excessive sound pressure from earphones can cause hearing loss.
-
Keep the player clean and never store it next to a heat source or in dirty, humid or wet places. Keep it out of direct sunlight.
-
Press the Player’s button gently. Pressing them or the screen too hard can damage the player.
-
Do not subject the product to harsh impacts. Do not drop the appliance. This may result in damage to the product.
Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects. When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or other soft material like chamois. Do not use acetone, toluene or alcohol to clean the surface of the screen. These chemicals will cause damage to the surface. -
Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
WARNING: To reduce the risk of fire or electric shock, this apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. 5B-En
Apparatus with Class | construction shall be connected to a Mains socket outlet with a protective earthing connection.
WARNING
TO PREVENT DAMAGE THAT MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARDS, O00 DOES NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Caution: – These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.
– Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
About Your TV
Specifications
- Model: CX27A21DC
- Screen Size: 27”
- Panel Resolution: 1920X1080
- Viewing Angle: 178(H)*178(V)
- Aspect Ratio: 16:9
- USB Port: Supports JPEG image/MP3 audio
Includes
- Remote Control and 2 AAA Batteries
- Base Stand and Screws
- Instruction Manual
- Wall-mount Screws (BM6*10mm)
Setup
Connecting the Stand
When placing TV on flat surface, be careful not to push, scratch, or otherwise
damage the front of the TV and LCD screen. Using a screwdriver, tighten the
screws by hand. Using a power drill could damage the TV stand.
Remote
Batteries
Requires 2, AAA-size batteries (included)
Mounting the TV on a wall
If you mount this TV on the wall, follow the instructions exactly as set out
by the manufacturer. Incomplete or improper installation may cause injury to
you, and/or damage to the LED TV. When you have appropriate wall mount
brackets, please install them by using the VESA screws included in TV PE bag.
Install Steps
- Assemble the wall mount adapter.
- Install the wall mount adapter on a wall with screws.
- Install the wall mount brackets onto rear cabinet with the VESA screws.
- Buckle the brackets with TV into the wall mount adapter.
Please refer to the table below to ensure the correct size VESA mount is used with the TV.
TV size in inches| VESA screw hole specs| Screw Size mm|
Quantity pc s
---|---|---|---
Width mm| Height mm
19-24| 100| 100| BM48| 4
27| 100| 100| BM610| 4
32| 200| 100| BM610| 4
39-43| 200| 200| BM610| 4
50-55| 400| 200| BM610| 4
65| 400| 400| BM610| 4
Orientation
TV Controls
INPUT | Press to select the input source |
---|---|
MENU | Press to enter the main menu |
CH+ | Press to skip to the next channel |
CH- | Press to skip to the previous channel |
VOL+ | Press to increase the volume |
VOL- | Press to decrease the volume |
Press to switch the TV on/off |
Inputs
DC 12V IN: | Power (DC 12V or plugpack) input. |
---|---|
Headphone Jack: | Headphone output jack. |
PC Audio Input Jack: | Connects to the Audio out jack of a computer. |
VGA Input Jack: | Connects to the VGA output jack on a personal computer. |
Mini Line Out: | Connects to the Audio in ports of an audio device. |
HDMI 1 Input Jack: | HDMI in. |
HDMI 2 Input Jack: | HDMI in. |
HDMI 3 Input Jack: | HDMI in. |
RF Input: | Connects to the ANTENNA, CABLE, or CABLE BOX. |
CVBS/Y/Pb/Pr: | Composite/Component Video & Audio in. |
Optical Out: | Connects to the Optical Audio in port of an audio device. |
Audio Input Jack: | Connects to the Audio out ports of an audio device. |
USB: | USB Port for media playback when Media is the TV’s selected source. |
Remote
Remote Control
REMOTE CONTROL OUTLOOK & FUNCTION KEY DEFINITION
-
[POWER] Press this button to switch to standby mode, and press it again to turn TV on.
-
INPUT) Press to select the input source.
-
[S.MODE] This button is used to select the sound mode.
-
[P.MODE] This button is used to adjust user picture mode, press this button repeatedly and select one of four settings.
-
(FREEZE) Static picture.
-
[SLEEP Let you select the amount of time before your TV turn itself off automatically.
-
[0-9) Press 0-9 to select a TV channel directly when you are watching TV. To enter page number in Teletext mode and so on.
-
[-/–] Press this button to enter a program number with different digits.e.g.-for1,–for11,—for111.
-
[ } To swap to the previous program from the current program.
-
(INFO) The button is used to display current channel information.
-
[VOL+/-] Press to increase/decrease the sound level.
-
[PROG+/-} Press to scan through or to select a channel.
-
[MUTE] Press this button to shut off the sound of the TV temporarily, and press again to restore the TV sound.
-
[MENU] Brings up the LED main menu to the screen in TV mode.
-
[EXIT] Press EXIT to exit menu or sub-menu.
-
[ ENTER) Allows you to navigate the on-screen menus and adjust the system settings to your preference.
-
[CCD] Select closed caption mode. Press the key repeatedly to choose one of the modes among Off, CC1, CC2, CC3, CC4, Text1, Text2, Text3, and Text4.
**** ] Play/pause or begin to timeshift. -
[EPG ] Press to show the Electronic Program Guide menu. ( ****} Stop playing or stop recording.
-
During playback, press to select the previous track/chapter. } During playback, press to select the next track/chapter.
-
{ ****J Switch to the previous display.
-
[ ****]Move to the next display.
-
[GOTO] Jump to a specific time on a DVD/ VCD/MP3/WMA or CD.
-
[A-B] Press to start the A-B repeat function.
-
[REPEAT] Press to select repeat playback modes.
-
[ZOOM] This button is used to set the display window.
-
[CH. LIST] Display program list.
-
[FAV.LIST] Press to select the channel in FAV List.
-
[ FAV ] Press to select the favorite channel.
-
[MTS] Select the MTS sound system. Press the key repeatedly to choose one of the modes among Mono, Stereo,Sap.
Loading batteries: Remove the lid of the battery compartment; Insert 2 AAA size batteries with polarities as indicated inside the compartment; Replace the lid.
Main Menu Operation
Setup Wizard
Connect RF cable to your TV Aerial socket.
TV Location
Set the TV Mode to Home or Retail display use.
Press the button to select(Home / Store).
Press button to select and press ENTER/ button to enter the sub-menu.
Note: This page is only enabled when you have an Energy Star request.
Select Language
Pres button to select the language to be used for menus and messages.
Press button to select and press ENTER/ ****button to enter the sub-
menu.
Setup Wizard
Select Time
Press button to select the time zone, daylight saving time and time format you
want.
Pres button on the remote control to adjust.
Press button on the remote control to select and press ENTER/ ****button to
enter the sub-menu.
Auto Scan
Press button to select the antenna type.
Press button to select and press ENTER/ ****button to start auto scan.
Setup Menu
Press MENU to enter the main menu, Press the button to select.
Press ENTER / to enter.
Press MENU again to exit or back to the parent menu
.
Press the button to select among Menu Language Transparen SD Timeout lose
patio ver Scan input Labe their setting estore Default setup Wizard Voice
Guidance Video Description.
Press ENTER / to enter.
Press the button to adjust.
Press MENU again or back to the parent menu.
Picture Menu
Press MENU to enter the main menu,Press the button to select.
Press ENTER / to enter.
Press MENU again to exit or back to the parent menu.
Press the button to select among Picture Mod Brightness contras olo Tin
harpies olor Temperature Advance settings.
Press ENTER / to enter.
Press the button to adjust.
Press MENU again or back to the parent menu.
Sound Menu
Press MENU to enter the main menu,Press the button to select.
Press ENTER / to enter.
Press MENU again to exit or back to the parent menu.
Press the
button to select among Sound Mode Treble as blanc MTS Audio Language Digital
Audio Output Surround Sound AVL.
Press ENTER / to enter.
Press the button to adjust.
PressMENU again or back to the parent menu.
Time Menu
Press MENU to enter the main menu,Press the button to select.
Press ENTER / to enter.
Press MENU again to exit or back to the parent menu. Press the button to select among Sleep
Time Time Zon daylight Saving Tim Time Forma Auto Cloc lock.
Press ENTER / to enter.
Press the button to adjust.
Press MENU again or back to the parent menu.
Lock Menu
Press MENU to enter the main menu,Press button to select.
Press ENTER / to enter.
Press MENU again to exit or back to the parent menu.Press button to select among Change
Password/Key Lock / System Lock / Input Block / US Rating / Canada Rating /
RRT Setting / Reset RRT.
Press ENTER/ to enter.
Press button to adjust.
Press MENU again or back to the parent menu.
Enter your 4—digital password. The default password is 0000, and if forget
what you set, please call the service center.
Channel Menu
Press MENU to enter the main menu,Press the button to select.
Press ENTER / to enter.
Press MENU again to exit or back to the parent menu.
Press the button to select among Air Cable Auto Sca favorite Channel Lis how
Hid channel Number channel Label.
Press ENTER / to enter.
Press the button to adjust.
Press MENU again or back to the parent menu.
Media Menu
Note: Before operating the Media menu, Plug in a USB device, then press the
INPUT button to set the Input Source to Media.
Press button to select Media in the Source menu, then press Enter button to
enter.Press button to
select the option you want to adjust in the main Media menu, then press Enter
button to enter.
Media Menu
Press the button to select PHOTO in the main menu, then press Enter button to
enter.
Press the Menu button to return back to the previous menu and exit the menu to
quit.
Press button to select the driver disk you want to watch, then press Enter
button to enter.Press
button to select return option to back to the previous menu.
Press the button to select the file you want to watch in the file selecting
menu, then press Enter button to display the picture.
When highlighting the option you select, the file information will appear on
the right and the picture will be previewed in the center.Press button to select the file folder you
want to search in the file selecting menu,
then press Enter button on your remote control to enter the sub-menu.
Press the button to select the file you want to delete in the file selecting
menu, then press red button on your remote control and press Enter button to
delete files.
Press the button to select MUSIC in the main menu, then press Enter button to
enter.
Press the Menu button to return back to the previous menu and exit the menu to
quit.
Press the button to select the driver disk you want to watch, then press Enter
button to enter.
Press the button to select the return option to back to the previous menu.
Press the
button to select the file you want to watch in the file selecting menu, then
press Enter button to add the file to the playlist, and press the media button
to display and operate file details.
When highlighting the option you select, the file information will appear on
the right.
Press the button
to select the menu in the bottom you want to run, then press Enter button to
operate.
Press the Menu button to back to the previous menu and exit button to quit the
entire menu.
Press the button to hide the menu int the bottom.
Trouble Shooting
Problem | Solution/Issue |
---|---|
TV does not operate | Make sure the power cord is plugged in. Try another AC |
outlet. If power is off, check the fuse or circuit breaker. Unplug the unit
for an hour, then plug it back in.
Normal picture, but no sound| Check the volume settings. Sound muted? Press
the MUTE button. Try another channel. Check audio cable connections.
The remote control does not work| Make the remote control is in range with no
obstructions. Check the batteries. Correct operating mode set:TV. VCR etc.
Poor sound or no sound| Station or Cable TV experiencing problems, tune to
another station. Check sound adjustments (Volume or Mute). Check for sources
of possible interference.
Poor picture or no picture| Station or Cable TV experiencing problems, tune to
another station. Make sure channels are set into memory.
Check antenna or Cable TV connections, and adjust the antenna. Check for
sources of possible interference.
Check picture control adjustments.
Poor TV reception| Ensure the antenna amplifier is turned on for Antenna TV.
Adjust the antenna position to a stronger signal receiving angle. Check the
Antenna connection is tight to the TV. Check if there is power supplied to the
Antenna distribution box. Confirm your incoming cable is connected to the
correct cable/antenna wall connection inside the RV. Ensure the internal RV
coax jump cable is connected to the correct port.
Poor Cable / Satellite TV Reception| Ensure the antenna amp is turned off for
cable signal. Check incoming Cable is connected correctly to RV.
Ensure cable splitter box has power. Confirm the incoming cable is connected
to the correct cable / Satellite wall connection inside your RV. Ensure the
internal RV coax jump cable is connected to the correct port.
Check Dish has not obstruction.
TV shuts off| Sleep Timer is set. Power interrupted.
TV AV input plays black and white| Check RCA connections on the back of the N
and from the source to ensure they are connected to the correct connections.
Ensure the yellow connection is in the correct port.
Customer Support
Warranty
Limited 1 Year Warranty
The Manufacturer warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of 1 year for
parts and 90 days for tabor from the original date of purchase. The
Manufacturer agrees, at its option during the warranty period, to repair any
defect in parts, the material of workmanship, of to furnish a repaired or
refurbished product of equal value in exchange without charge (except for a
fee for shipping, handling, packing, return postage and insurance which will
be incurred by the customer). Such repair or replacement is subject to
verification of the defect or malfunction and proof of purchase as confirmed
by showing the model number on the original dated sales receipt. This warranty
is not transferable to any person or entity other than the original purchaser
and does not cover the costs incurred from the installation, removal, or
reinstallation of the product.
The extent of the Manufacturer’s liability under this warranty is limited to
the repair or replacement provided above. In no event shall the Manufacturer’s
liability exceed the purchase price paid by the purchaser for the product.
Services provided under the terms of this warranty are your exclusive remedy.
Coverage Does NOT include:
- Any product which has been subject to damage due to an act of God, misuse, neglect, accident, abuse, or commercial use.
- Damage due to improper installation, operation or maintenance, or attempted repair by anyone other than the Manufacturer.
- Damage to external media devices such as DVDs, CDs, iPods, iPhones, MP3 players, and/or memory devices.
- Cosmetic damage, accidental damage, set-up adjustments, panel damage by non-moving images for a long period of time, connection to an improper voltage supply, modification of, or to, any part of the product.
- Re-manufactured units, products sold “As Is”, or closeout products.
- The cost of shipping this product to the Service Center and its return to the owner.
Where is the Warranty Valid?
This warranty is valid only in the United States and Canada and grants
specific legal rights. You may also have other rights which vary from state to
state.
How to Obtain Service
FOR WARRANTY SERVICE AND INSTRUCTIONS ON HOW TO RETURN YOUR PRODUCT CALL:
U.S.800-442-7717
International(574) 522-7781
Our technical support team is available Monday – Friday, 8 am to S pm EST
Please make sure to place the product in its original packaging, or packaging
that provides the same amount of protection as the original packaging.
River Park Inc.
21953 Protecta Drive | Elkhart, IN 46516
http://www.riverparkinc.com
U.S.800-442-7717
International(574) 522-7781
Documents / Resources
|
connex CX27A21DC FHD LED
TV
[pdf] Instruction Manual
CX27A21DC, FHD LED TV, CX27A21DC FHD LED TV, LED TV, TV
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>