S BAGNO 12070TDM 24 Inch Round Led Bathroom Mirror Instructions
- June 14, 2024
- S bagno
Table of Contents
S BAGNO 12070TDM 24 Inch Round Led Bathroom Mirror Instructions
Technical information
Size: 80X80cm
Input: 220V
Power: 47W
Ra: >80
LED: SMD2835/276PCS
Lumen: 2600LM
CCT: 6500K/3000K/4000K
Kits coming with the mirror
-
Expansion Tube 2
-
Screw 2
-
Junction Box 1
Tools needed for installation
-
Pencil
-
Screw Driver
-
Rubber Mallet
-
Electric Drill
-
Tape Measure
Installation steps
-
Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
-
Use a hammer to drive the pastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
-
Connect the wall power cord to the wires behind the mirror through the junction box.
-
Align brackets behind the mirror with the screws on the wall and hang it, installation is completed
Instructions for use
The mirror is equipped with 3 touch sensor switch, when installation finished and power connected, the touch sensor light will be on, it can be turned off by long press when the mirror light is off.
For LED Light
First touch sensor is for the LED light, one click for light on/off, long
press for dimming
For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can
turn it on, when we finish the shower, the demister pad area would be clear
without any fog. Turn if off before leaving.
For LED Magnifying Mirror
Third touch sensor is for lighting up the magnifying mirror, one click for
light on/off. The magnifying mirror with light can zoom on your facial
features when putting eyeliner, eyelash, lipstick and shaving, make sure that
every detail of your hair and makeup are appropriate.
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
- Do not use outdoors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>