OttLite CSN9700PC LED Flexible Magnifier Desk Lamp Instructions

June 9, 2024
OttLite

OttLite CSN9700PC LED Flexible Magnifier Desk Lamp Instructions

Product Overview

CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new OttLite® product.

PRODUCT REGISTRATION FORM

Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: OttLite.com/warranty

NOTE: THIS UNIT IS FULLY ASSEMBLED

  1. Remove lamp from packaging and place on a flat surface.
  2. Plug adaptor into a standard 120V household outlet and rear of the lamp.
  3. To turn the light on/off and adjust brightness, touch the  symbol.
  4. Open the lid to use magnifier.

SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

  1. Turn lamp off and WAIT UNTIL LAMP HEAD COOLS before handling.
  2.  The LED panel might get hot after several hours of continuous use, DO NOT place your hands directly on LED light panel.
  3. Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord.
  4. Do not alter the plug.
  5. The lamp head included with this unit cannot be replaced by the consumer .
  6. INDOOR USE ONLY.

NOTE: The important safety instructions appearing in this instruction sheet a r e not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care must be used with any electrical product.

CAUTION! INDOOR USE ONLY. NEVER LEAVE THE MAGNIFIER LENS UNATTENDED IN DIRECT SUNLIGHT OR WHERE LIGHT CAN SHINE THROUGH IT AS THIS CAN POSE A RISK OF FIRE

CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

CAUTION! THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.

FCC PART 15

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any change or modification to product not expressly recognized by OttLite Technologies voids OttLite’s responsibility for proper function of product.

CAN ICES-005 (B)/ NMB-005 (B)

POWER ADAPTER SPECIFICATION

  • Input: AC 100-240V, 50/60 Hz, 0.2A
  • Output: 12V DC, 0.42A with a Male DC Plug

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

OttLite User Manuals

Related Manuals