Xhorse XNDS Universal Remote Key User Manual

XNDS Universal Remote Key

“`html

Specifications:

• Model: XNDS Universal Remote Key
• Battery Type: CR2032, 3V
• Frequency: 433.92 MHz
• Compliance: FCC, CE

Product Usage Instructions:

Button Description:

• 1: Switch button for mechanical key
• 2: Lock button
• 3: Trunk button
• 4: Unlock button

Changing Battery:

1. When the battery needs replacement, follow these steps:

2. Pry the plastic cover upward to access the battery
   compartment.

3. Take out the old battery and replace it with a new CR2032,
   ensuring correct polarity.

Pairing with Vehicle:

1. Refer to the corresponding vehicle models for pairing
   instructions.

2. Install the key as before after pairing.

FCC Statements:

For optimal performance, consider the following FCC
recommendations:

• Reorient or relocate the receiving antenna.

• Increase separation between the equipment and receiver.

• Connect to an outlet on a different circuit from the
  receiver.

• Consult a professional for assistance if needed.

CE Statements:

The product is compliant with EU regulations regarding frequency
bands and power limits. Ensure proper usage within these
guidelines.

RF Warning for Portable Device:

The device meets RF exposure requirements and can be used in
portable conditions without restrictions.

FAQ:

Q: What type of battery does the remote key use?

A: The remote key uses a CR2032 battery with a voltage of
3V.

Q: How do I pair the remote key with my vehicle?

A: Refer to the corresponding vehicle models for pairing
instructions and ensure to install the key correctly after
pairing.

“`

XNDS Universal Remote Key User Manual

Overview:
XNDS Universal Remote Key is suitable for vehicle which contains the Xhorse receiver. Note: The operating temperature of the product is -20­50.
Button description:

1 2 3
4

Item
1 2 3 4

Description
Switch button for mechanical key Lock button Trunk button Unlock button

Change battery:
First use or when the battery runs out need to change new battery, following steps:

1

2

3

Just pry the plastic cover upward
Pairing method:

Take the battery out and replace new one
Note: The battery type is 2032 with 3V, ensure the positive and
negative of battery is correct.

Pairing with vehicle: Referring to the corresponding vehicle models to match.

Install the key same as before

FCC statements:
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
CE statements:
Frequency Band(s) This device operates with the following frequency bands and maximum frequency power. Note: The product is compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model. RFID (433.92 MHz) Max Pe.r.p. is -28.84 dBm. EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Xhorse Electronics Co., Ltd. declare that Universal Remote Key with model XNDS is in compliance with Directive 2014/53/EU and 2011/65/EU.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>