legrand Wattstopper Eight-Outlet Power Strip with Personal Sensor User Manual
- June 9, 2024
- Legrand
Table of Contents
legrand Wattstopper Eight-Outlet Power Strip with Personal Sensor
PACKAGE CONTENTS
Catalog Number
Power Strip
DI-110 Personal Sensor
DESCRIPTION AND OPERATION
The Watt stopper Isolé IDP 3050-A is an advanced energy saving control system, designed for general office use. It combines an eight-outlet power strip with the DI-110 personal sensor. The IDP 3050-A controls power used by plug load devices, and provides surge protection. Its use reduces energy costs and helps the environment by turning power consuming devices off based on occupancy
THE POWER STRIP
The power strip provides surge protection. It also filters noise caused by electromagnetic interference (EMI) and radio frequency interference (RFI).
Outlets
Six of the power strip’s eight outlets are controlled by the personal sensor, and the remaining two are uncontrolled.
Switches
The power strip has an ON/OFF switch to turn its outlets on or off.
Diagnostic Lights
“Protected” LED indicator: When the surge protector is operating correctly,
the LED indicator labeled “Protected” is lit. When unlit, a power disturbance
or fault has occurred within the unit.
“Grounded” LED indicator: Another LED indicator, labeled “Grounded,” is lit
when the wall outlet is properly wired and grounded. The surge protection will
not operate if the power strip is not properly grounded.
Use Uncontrolled outlets for devices that must be continuously powered (such
as a computer).
Use Sensor-Controlled outlets for appliances and items that don’t need to be
powered while you are away from your work area (such as a light, fan, or
monitor).
THE DI-110 PERSONAL SENSOR
The DI-110 personal sensor uses passive infrared technology to detect
occupancy within a workspace.
When the sensor detects occupancy, it automatically turns on the power strip’s
six controlled outlets. It turns off these outlets when it no longer senses
occupancy in the workspace and the user-set time delay elapses. (See Time
Delay Setting.)
Uncontrolled outlets are continuously powered by the power strip, and remain
on regardless of occupancy.
Time Delay Setting
The personal sensor automatically turns off all controlled devices after a
workspace becomes vacant and a pre-set time interval, or time delay, elapses.
This setting is user-adjustable.
Turning the trim pot dial (located on the back of the sensor) clockwise or
counterclockwise adjusts the time delay. The range for adjustment is 30
seconds to 30 minutes.
- To adjust to 30 seconds (minimum), turn the dial completely counterclockwise.
- To adjust to 30 minutes (maximum), turn the dial completely clockwise.
- To adjust to 15 minutes, turn the dial half way between its maximal clockwise and counterclockwise positions.
NOTE: Use a small screwdriver to make adjustments.
Initial Warm-up
The personal sensor requires an initial warm-up period of up to two minutes
whenever the power strip is initially turned on. During this time, all
connected devices will remain on, regardless of occupancy or the time delay
setting
WARNING: RISK OF ELECTRIC SHOCK. DO NOT PLUG INTO ANOTHER RELOCATABLE
POWER TAP.
This device features an internal protection that will disconnect the surge
protective component at the end of its useful life, but will maintain power to
the load now unprotected.
NOTE: If the “Protected” LED is not lit, the surge suppression feature
has stopped working. Devices requiring surge protection should not be plugged
into the power strip’s outlets when the Protected LED is unlit. The power
strip may need to be replaced. Call Technical Support.
WARRANTY INFORMATION
Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation.
No. 24908 – 05/22 rev. 1
© Copyright 2022 Legrand All Rights Reserved.
800.879.8585
www.legrand.us/wattstopper
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>