Nedis HPBT5400GY Bone Conduction Headphones User Manual

: June 5, 2024
: nedis

HPBT5400GY Bone Conduction Headphones

Nedis HPBT5400GY Bone Conduction Headphones

User Manual

Preface

Thank you for purchasing the Nedis HPBT5400GY.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis HPBT5400GY is a wireless headphones that plays audio by sending vibrations on the temporal bones.

The product allows you to listen to music and ambient sound simultaneously.

See image A how to wear the bone conduction headphones.

Audio files can be stored on the internal memory.

The product can be paired with any Bluetooth enabled audio/video device.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

A

Specifications

Product

|

Bone Conduction Headphones

---|---

Article number

|

HPBT5400GY

Weight

|

36 g

Bluetooth® version

|

5.0

Bluetooth® frequency range

|

2403 – 2480 MHz

Max. radio transmit power

|

2 dBm

Transmission distance

|

Up to 10 m (barrier free)

Frequency response

|

20 – 20000 Hz

Impedance

|

8 Ω

Sensitivity

|

88 ± 3 dB

Battery type

|

Lithium-ion

Battery capacity

|

180 mAh

Rechargeable

|

Yes

Charging time

|

Up to 2 hours

Play time

|

Up to 4.5 hours

Storage capacity

|

8 GB

Power input

|

5 VDC ; 1 A

Main parts (image A)

B

1. Built-in microphone

2. Status indicator LED

3. Play / pause button

4. Micro USB charging port

5. Previous song / Volume down

6. Next song / Volume up

7. USB power cable

8. Foam rubber earbuds

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power source and other equipment if problems occur.
Do not expose the product to water or moisture.
Do not use any charger other than that specifcally provided for use with the product.
Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
Do not leave a battery on prolonged charge when not in use.
After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Batteries contain explosive gases. Prevent contact with flames and sparks. Provide adequate ventilation during charging.
During charging, the battery must be placed in a well-ventilated area.
To prevent possible hearing damage, do not listen at high volume levels for long periods.

Safety symbols on the product

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Use

Using the product

Due to the wide variety of products with a bluetooth connection we cannot guaranty that all devices will be recognized or all operating options can function.

Charging the product

1. Plug the USB power cable B 7 into the micro USB charging port B 4.

2. Plug the other end of B 7 into a computer or power adapter.

The status indicator LED B 2 lights up blue when the headphones are fully charged.

Switching on the product

Press and hold play / pause B 3 for 3 seconds.
Pairing the headphones to a Bluetooth audio source

1. Switch on the product to activate searching mode.

2. Enable Bluetooth on the device you want to pair the headphones with.

B 2 blinks red and blue to indicate pairing mode is active.

3. Select “ HPBT5400GY ” from the list of available Bluetooth devices on your device.

When pairing is successful, the headphones voice says “ Connected ”.
If the headphones have been paired with another device before, make sure that device is switched off.
If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.

Storing music

1. Plug B 7 into B 4.

2. Plug the other end of B 7 into a computer.

3. Copy or move audio files to the internal storage of the product.

Switching between Bluetooth mode and Card mode (Internal storage mode)
Double press B 3 to switch between Bluetooth mode and Card mode.
The headphones voice says which mode is activated.

Controlling the music

Press B 3 to play or pause the music.
Press and hold B 5 to go back to the start of the song. Press again to go to the previous song.
Press and hold B 6 to skip to the next song.

Controlling the volume

Press B 5 to decrease the volume.
Press B 6 to increase the volume.

Making phone calls

To answer an incoming call, press B 3.
To reject an incoming call, press and hold B 3 for 2 seconds.
To end a call, press B 3.

Switching off the product

Press and hold B 3 for 3 seconds to switch off the headphones.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT5400GY from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

webshop.nedis.com/HPBT5400GY#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands