D17 True Wireless Earbuds User Manual

D17 True Wireless Earbuds

Packing List

Product Overview

Bluetooth Connection

1. Open the lid of the Charging Case, two earbuds will automatically power on and enter pairing mode. ( At this time, the led indicator of one earbud goes off and the led indicator of another earbud flashes red and blue alternatively.)
2. Activate the Bluetooth setting on your phone, search and connect “D17″.(Once connected, you will hear a voice prompt” connected” and the led indicator of another earbud goes off too. )

Note: If the earbuds are not connected to your device for over 5 minutes, the earphones will be powered off.

For The Second Time And Subsequent Using
If your cell phone has already connected with the earbuds, in the second time using, when you open the lid of the charging case, the earbuds will connect with your cell phone automati­cally.

Connect with Other Devices
If you want to connect the earbuds with other devices, please delete “Dl 7” on the Bluetooth list of your connected devices or turn off the Bluetooth of your connected devices, then follow the Bluetooth connection steps to proceed.

Mono Mode (Only Left/Right Earbud is being Used)

1. If you want to use one earbud, please take one earbud out of the charging case.Leave anotherearbud in the charging case,close the lid of charging case.Turn on the Bluetooth on your device, search “D17” on the Bluetooth list, click to connect.
2. When the earbuds are not in the charging case, the distance between both earbuds is over 10 meters, both earbuds will get unpaired with each other, at this time, one earbud could be used for one device, and the other earbud for another different device. If both earbuds get closed to each other, the distance between them becomes within 10 meters, both earbuds will pair with each other again and be useable with the same device only.

Power On / Power Off

Auto Power On

When opening the lid of charging case, the earbuds will automatically turn on and start pairing.

Manual Power On
In the shutdown status and when the earbuds are not in the charging case, tap and hold the earbud’s intuitive touch area for 2 seconds to power on.

Auto Power Off

Put the earphones back in the charging case and close the case to turn them off.

Manual Power Off
If the earbuds are not in the charging case, first disconnect your 017 earbuds from your connected device, then press and hold the touch area of the earbuds for 5 seconds to power off.

Note: In non-connection mode, press and hold one earbud turn it off manually, another earbud will turn off together.

Phone Calls Control

When there is an incoming call, a voice prompt ” incoming call’, then reports the incoming call telephone number.

Music

Charging Case

Battery Indicator of Charging Case
The display will show the power of the charging case when you open or close the lid. The number will flash when charging, the screen will show” 100″ when fully charged and will turn off about 60 seconds later.

Battery Indicator of Earbuds
Put the earbuds back into the case to charge the earbuds.The battery indicator of earbuds will flash from 1st grid to 4th gird repeatedly when the earbuds are charging, and they will turn off after the earbuds are fully charged.

Wireless Charging Supported

(We recommend you use wireless charging pad with QI cert1f1cate.) If the charging case doesn’ t start to charge, please try to reposition it. ( Wireless Charging Pad Not Included)

• Features with NTC temperature-control protection, 017 earbuds will not charge if the temperature reaches 45 degrees or higher. (Charging cases will automatically protect themselves in that case.) It is recommended to stop charging(or disconnect wireless charging) first, and recharge after the temperature drops below 45 degrees.

How to wear the earbuds?

For earbuds to effectively transmit sound, they need to be lodged in your ear canal and relatively close to your eardrum. Please place the earbuds snugly into your ear canal and keep the rod vertically.

Specifications

Charging Case

• Weight: 36.3g
• Size: 51.3124.653.54mm
• Charging Time : 2h
• Batter Capacity: 400mAh

Earbud (each)

• Model Name: D17
• Bluetooth Version: VS.l
• Technology: HSP/HFP/A2DP/AVRCP
• Transmission Distance: 10m/33ft (If the are no obstructions the range could be as far as 33 feet.) Earbud Battery: 3. 7V 40mAh
• Earbud Charging Time: l.lh
• Earbud Weight: 3.Sg/PC
• Earbud Dimension: 16.6418.3133.58 mm

Factory Restore Setting

When should I reset it?

When only one side plays music. When you can’t use the two earbuds together. When both earbuds fail to pair with each other or occur connection-related issues. To unpair all previous devices from your D17, please delete D17 from the Bluetooth menu on all previous devices or deactivate the Bluetooth setting. It’s done! Now you can pair the device of your choice with D17.

If you feel the above operation is not convenient, please follow the below steps to reset your earbuds:

1. Find a place more than 10 meters away from all previously connected devices.
2. Turn on both earbuds.
3. Quick-press 5 times on one earbud, and you can hear a voice prompt “power off”, the previous pairing memory with all previous devices is cleared, and both earbuds are power off.
4. Now, Dl 7 is ready for your new Bluetooth device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>