G20 True Wireless Earbuds Instructions

G20 True Wireless Earbuds

Product Description

Headphone parameters

• Product Model: G20
• Version: 5.2
• Battery Capacity: 25mAh/3. 7v
• Effective distance: 10 meters
• Play time: about 5 hours
• Talk time: about 4 hours
• Input parameters: 5V/100mA

Charging box parameters

• Battery capacity: 200mAh/3.7v
• Charging box parameters: 5V/1A
• Charging time: about 1.5 hours
• Charging times of earphones by charging box: about 3 times

Packing list

1. Charging box
2. Earphones 2
3. Instructions
4. Gift BOX
5. Type-C charging cable 1

Wearing method

lift the compartment cover up, take out the right-side earphone, and gently put it into ear canal, Wear the same way as the right ear.

Operation

Power on

1. Open the charging box, the headsets would turn on automatically, blue light flashes.
2. When the headset is off, touch the headset touchpad for 3 seconds to turn on.

Power off

1. Close the lid and replace the earphones in the charging compartment. The earphones will be charged and turned off.
2. When the headset is turned on, press the touchpad for 5 seconds to turn it off.

Switch the language between Chinese and English: Double-click the touch button while 2 earbuds are connected to each other and aired with a mobile phone.

Binaural pairing connection

1. When you open the charging compartment cover, the headset turns on automatically, the blue light flashes, and it enters the pairing state. One of the headset lights will be off, indicating that the pairing is successful.
2. Turn on the phone’s Bluetooth, search for G20 to pair, when you hear “connected”, the pairing is successful.

Note

1. if the connection fails, place the headset back into the charging compartment and repeat the preceding steps.
2. If you move away from the device while it is connected, the headset will automatically enter the back-connecting mode. If the connection is not established within 3 minutes, the headset will automatically shut down.

Charging display

Charging the charging case

• The LED display on the charging base shows the percent of battery power.
• The LED display flashes and shows the battery power-the charging base is on charging.
• The LED display is always on and shows number 99- the charging base is fully charged.

Charging for the earbuds

• The LED display of the charging base is always on and shows the battery power the earbuds are on charging.
• The LED display of the charging base is off-the earbuds are fully charged.

Binaural touch operation

Game mode

When the device is connected, tap the left or right side earphone’s trackpad3 times to switch the game mode or music mode.

F&Q

Q: If unable to connect the headset to the phone?

• Answer: Delete the paired G20 on the phone, and try pairing again.

Q: Why is there no sound when listening to songs/calls?

• Answer: Android phones have a setting icon on the right side of the phone connection record. Click to enter, uncheck the two audio options and select again. When setting the general auxiliary function of the Apple phone, enter the audio call mode and select it automatically. If it is automatic, There are more other options, and then change to automatic, if not restored, delete the pairing record and try to connect again.

Precautions

1. Please use a charger with safety certification from a regular source for charging.
2. Adjust the volume appropriately when using headphones to avoid hearing damage.
3. Use the product correctly to avoid falling or heavy squeezing
4. Children should use it when accompanied by an adult to avoid accidental ingestion.
5. Keep away from extreme environments such as high temperatures or humidity.
6. Do not disassemble this product.

Warranty Card

This card is a certificate for applying for a warranty card. Please fill it Out in cooperation with the seller and keep it properly for future use.

Note: This form should be stamped and confirmed by the seller; the repair record is subject to the repair certificate of the authorized service organization. After applying for the service, please keep it properly.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>