Earbuds Mini Wireless Bluetooth Headset User Guide
- June 5, 2024
- Earbuds
Table of Contents
Earbuds Mini Wireless Bluetooth Headset
TAKE A LOOK
- Calls and streaming audio
- Take a call or end it (single click)
- Reject a call (2-second press)
- Hold first call and answer second call (single click)
- Switch between calls (2-second press)
- End second call and retrieve first call (single click)
- Transfer call from phone (single dlick)
- Use phone’s voice – control feature to make a call (2-second press until tone is heard)
- Reconnect lost Bluetooth connection
- (if the headset does not automatically reconnect, turn it off and on again)
- Play or pause audio (1 tap)
- 1hour before first use (LED lights in blue)
- 2.5hours for full chargeTurn on or off (2-second press)
- Activate pairing mode after initial set up (press until blue LED flashes)
- Check battery level (1 tap when power is on)
GET CONNECTED
Ready
- First time,right out of the box:
- With ear buds turned off,activate Bluetooth pairing mode Press long press for 5 seconds .
- The LED flashes blue to indicate pairing mode.
- Pairing new phone/reconnecting original:
- With ear buds turned off, Press long press for 5 seconbseconds until the LED flashes red and blue
Set
- Activate the Bluetooth feature on your device.
- then use phone menus to “add”, “search” for new Bluetooth devices.
- Phones have different menus to select form:
- iPhone: Settings > Bluetooth> On (stars the search for devices)
- BlackBerry smart phone:Settings/options>
- Bluetooth: On> Search for devices
- Android smart phone: settings
Connect
- Select” Bluetooth” from the of Bluetooth devices shown on your device.
- If devices asks for a pass code, enter four zeros (0000) you may see” onscreen.
- Some devices also ask to confirm connection after pairing
- The ear bud’s LED will stop flashing blue once successfully paired/connected.
- You can now make a call using your device’s
- keypad or voice-dialing featture and enjoy audio listening from your device.
Function introduction
The latest technology Compatibility V4.1. V4.2. V3.0.v2.1. V2.0. V1.2. V1.1 Internal integrate 80MHz RISC MCU and 80MIPS Kalimba DSP, However Bluetooth 3.0 the maximum support to 64MHz RISC MCU and 64MIPS Kalimba DSP
This product support Profiles:
- HFP V1.6 wide band speech (HD voice ready)
- HSP V1.2
- A2DP V1.2
- AVRCPv1.4
- CVC Version 6.0
- Effective distance:10metres
- Work frequency: 2.4GHz
- Support multi – point connection(simultaneous connection of two mobile phones)
- Two mobile phones, one headset, a key to answer the call.
- Support voice report number When phone call coming, automatic report telephone numbers to avoid important telephones.
- E.g.10″o”8″”6″phone call coming.
- Support voice reminding function Real-time report to users the status of the Bluetooth earphone,handle skillfully.
- E.g.: “Bluetooth is turned on”, Bluetooth is Power off”.
- IPhone:power consumption display function:
- Display Bluetooth headset power on iPhone &, In order to consider whetherneed to charge the headset.
- Translate freely in Chinese. English, boot blue lights flashing
- press the volume+2time in a row, 23 combos ,transformation of success
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmtful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment. This
devicee complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.