N05 Wireless Bluetooth Earbuds User Manual

N05 Wireless Bluetooth Earbuds User Manual

Thanks for using our wireless electronic products. For a good user experience, please read the manual carefully before using the products. Notice: To avoid unnecessary troubles, please do not disassemble these products by yourself, and please use the standard charger to charge.

Product overview

1. Choose the ear cap that suits you
   

2. Make sure that the ear caps face down and put the earbuds into the ear in he angle shown as the picture on the right.

3. After putting on the earbuds, gently rotating the earbuds to a comfortable and secure position shown as picture 3 on the right.
   Now the earbuds are put on correctly!

4. Error demonstration
   Do not wear the earbuds like the way shown as the picture on the right

First time using

1. Tear off the insulating film.

2. Put the earbuds into the charging case and close the lid to charge(the earbuds are in charging state).
   

3. Open the charging case, the earbuds will turn on and pair automatically, waiting to be pairing with the device (the indicator light will alternately turn red and white)
   Warm notice： If earbuds are not turned on or there is no sound come out, please put the earbuds back into the charging case and close the lid again, make sure that earbuds are in the charging state before opening the lid and taking out them to use (red/White light flash alternately)
   

4. The indicator of one earbud will go off and another will flash red and White light alternately. (In pairing mode)

5. Turn on the Bluetooth function on your phone and search for【N05  and connect it.
   Gentle Tips: For two unpaired earbuds and no device is connected also at the meanwhile, three-click the left/right earbuds after turning on to enter the TWS pairing state, the white light flashes quickly; when pairing is successful, the red and white flashes alternately.
   Note: Nothing need to do if the earbuds are paired and connected.
   If you want to connect with another device, please turn off the Bluetooth function in the previously connected device or delete the pairing name of ‘N05’,then you can search “N05” in a new device to pair and connect them.
   

Button control

ON

• The earbuds will automatically turn on after opening the top lid of the charging case.
  OR

• Press and hold the power switch for 5s then stop to hold, the earbuds will turn on.(Not in the charging compartment and is in the off state)

OFF

• Put the earbuds into the charging case and close the lid, they will automatically shut down.
  OR

• While in the non-working state, press and hold the power switch for 5s, the two earbuds will be turned off at the same time.
  OR

• Automatically shut down after not connected for more than 10 minutes

Warm notice
For any single earbud, when it is in standalone mode, you can’t use it to play the previous song or decrease the volume.

ANC (Active Noise Cancelling)

TWS state
In a non-calling state, click the MFB button once on the left earbud to switch the following modes in turn.

Steps of charging for earbuds:

Put the earbuds in the charging case, and the lid must be closed to charge it, and they will automatically turn off and disconnect when the charging case lid is closed.

Charging case： Please use a charger with anoutput voltage of DC5V/1A to charge the charging case. You can also use a computer USB or other USB interface charger to charge (Must choose a charger certified by a regular manufacturer）.

Notice:

1. If the charging case is out of power, it may cause the earbuds to fail to shut down and remain connected to the phone even when they are placed in the charging case. So please remember to charge the charging case in time

Earbuds indicator

main ear flashes alternately in red and white
Connect with mobile phone successfully| No light
Calling| No light
Music play| No light
Clear connection and pairing memory| Turn off after the red light is on for 1 second
Low battery| Red light of earbud flashes once every 3s
Charging| Red light on
Full battery| Red light off

Charging case indicator

Siri and other Voice Assistant

iOS and part of the Android users can awake the voice assistant by 4-click the L/R earbud touch button.

The voice assistant will be automatically activated depends on different OS in mobile system.

Restore factory setting

1. When the earbuds are turned on and not connected to the cell phone, quickly touch the left and right earbuds buttons 5 times at the same time, the red light will be on for 1 second, then the earbuds clear the memory and shut down automatically .
   

2. Please delete all paired records on the phone and search again for “N05″on the bluetooth of mobile phone and reconnect
   

Specifications

If there is noise, broken sound, or low sound, please take off the silicone ear cap and wipe it with a cotton swab.

If the earbud is not charged properly, wipe the charging column with a cotton swab, and then charge it again.

Attentions

Please make sure that the products are dry. If there is water droplet on the surface, please wipe it with a dry cloth before putting them back into the charging case to avoid demaging the device.

1. Do not use corrosive liquid to clean this product.
2. If it comes into contact with chemicals, please rub 5x it with a damp cloth wet with clean water.
3. Do not use this product under extreme circumstances for temperature below -10 degree Celsius or above 60 degree Celsius .
4. To avoid explosion, please do not throw this product into fire.
5. To avoid scratches, please do not touch the earbuds with sharp objects.
6. Do not insert objects into the earbuds, otherwise it would cause damage to the internal components.
7. Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave them become empty battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A current. Excessive current may cause the damage to battery

Battery Warning!

There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product to strong sunlight, fire or throw it into fire.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>