SCOSCHE ITCLS01B ISO Double Din In Dash Installation Kit Instruction Manual

SCOSCHE ITCLS01B ISO Double Din In Dash Installation Kit Instruction

Manual

ITCLS01B

(For Non-Nav Vehicles)

ITCLS01 B Kit Contents

1. ITCLS01 B Main Panel (7438)
2. Dual Touch Screen ITC Module
3. Touch Sensative Hazard Button
4. Passenger Airbag Light
5. Passenger Seatbelt Light
6. Left Bracket (7440)
7. Right Bracket (7439)
8. 4x Bracket Mounting Screws
9. ITC Wiring harness•
10. LSAAB (Antenna Adapter)’
    (Not Shown)

Tools Required

• PRT (Panel Removal Tool)
• Screwdriver
• Picking Tool
• 10mm Socket Wrench

Designed & Engineered in U.S.A.
Custom Manufactured in China

INTRODUCTION/PRELIMINARY

This premium installation kit is for 2006-13 Lexus IS series vehicles without navigation. Included are all the parts you need to mount an Aftermarket head unit into your vehicle’s dash. Refer to individual instruction in this manual to remove your vehicle’s factory radio and assemble the kit.

CAUTION: DISCONNECT YOUR VEHICLE NEGATIVE BATTERY TERMINAL BEFORE THE
INSTALLATION TO HELP PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOLT/ OHM METER OVER A TEST LIGHT TO CHECK WIRING. A TEST LIGHT OR GROUNDED WIRE PROBE CAN CAUSE DAMAGE TO THE VEHICLE’S COMPUTER AND/OR DIAGNOSTIC SYSTEMS. AVOID ALL FACTORY AIRBAG WIRING – AIRBAGS CAN ACCIDENTALLY DEPLOY CAUSING SERIOUS INJURY OR DEATH.

NOTES—————————
• See your vehicle’s instructions for any special tools your installation might require.
• Read all instructions accompanying your car stereo for proper wiring and mounting instructions.

LIABILITY DISCLAIMER

This instruction booklet is based on carefully documented data and research of automobile disassembly, wire harness/codes and information pertaining to the installation of this kit. Scosche Industries, Inc. cannot be held responsible for discrepancies/ inconsistencies that may occur due to the automobile manufacturing changes or options, or damage that may occur in the automobile during the installation of components while using this booklet.

INSTALLATION GUIDE

Disassembly

Double Din Assembly

STEERING WHEEL CONTROL

The Scosche ITCLS01 B Lexus IS Series face panel comes with a steering wheel control harness that will retain the vehicles OEM steering wheel capabilities when equipped. Refer to the wiring diagrams on pages 5 (SWC Wiring Diagrma) & 6 (HVAC wiring diagram) for a connection guide.

For a more detailed understanding of the steering wheel controls, please refer to your vehicles owner manual for button functionalities.

1. Volume DOWN
2. Volume UP
3. Scan through stations & tracks DOWN
4. Scan through stations & tracks UP
5. Power ON/ Toggle through the multiple Audio Sources
6. Toggle through display items in cluster screen
   (Nol operated by UAC module)

1. Prepare SWC steering wheel connector harness by using the chart below
2. Connect the harness to the interface module.
3. For Alpine, Clarion, JVC, Panasonic and Sony car stereos, connect the 3.5mm male steering plug into the steering wheel input jack at the back of the stereo.
4. For Kenwood and newer JVC stereos, connect the BROWN wire from the steering wheel harness to the “Remote in” wire at the back of the stereo.

SWC HARNESS

SAMPLE

SCOSCHE HVAC WIRING DIAGRAM

The Scosche Touch Screen Interface replaces the Factory climate, convenience and personalization controls built into the Factory Lexus Radio/Dash panel. This solution provides improved ergonomics while adding touch screen capabilities unique to this system along with steering wheel control functionalities. The following wiring diagram is a guide to help the user understand the wiring connectivity for their new radio face panel installment. If you have any questions call our free technical support help line at: 1-800-621-3695×3

WIRE COLOR CODES

CLIMATE & CONVENIENCE CONTROL

The Scosche Touch Screen Interface replaces the Factory climate, convenience and personalization controls built into the Factory Lexus Radio/Dash panel. This solution provides improved ergonomics while adding touch screen capabilities unique to this system. Read the following sections to familiarize yourself with the operating controls and settings.

CLIMATE CONVENIENCE CONTROLS

1. Scosche Logo (Active Button)
2. Menu (Enter Settings Menu)
3. Dual Zone Climate Control Button
4. Automatic Temp. Setting
5. Air Recirculation Mode
6. Front Windshield Defogger
7. Rear Window Defogger
8. Micro Dust & Pollen Filter

MENU NAVIGATION

MENU Press the MENU button (Page 8 Fig.5, #2) to access Configuration Menu
Vehicle/Picture/Language/Version Settings

The following figures (6-8) are sample menu screen displays to help you navigate and understand the menu user interface of the module. Use the (Return arrow) to go back to the previous menu. Press the X to close the menu window and return to the TFT color touch screen home screen. For further setting options refer to the Settings Chart on Page 10.

CONFIGURATION SETTING CHARTS

Use the chart below to help guide you through the various setting options. Use figures 6-9 as screen reference/ navigation for for the setting charts below.

VEHICLE SETTINGSS CHART

PICTURE SETTINGS

DAY THEME

Touch the “Brightness (Day)” button to assign Day-time color theme for the Color TFT touch screen. This setting will keep the display with light colored background regardless of outside environment (overrides Factory control).

NIGHT THEME
Touch the “Brightness (Night)” button to assign Night-time color theme for the Color TFT touch screen. This setting will keep the display with dark colored background regardless of outside environment (overrides Factory control).

AUTO THEME (Default)
Touch the “AUTO” button to assign Automatic (Factory) control of the TFT color theme. This setting will keep Data controlled switching color theme according to the outside environment. (Light for Daytime I Dark for Nighttime)

LANGUAGE

VERSION
MCU: HVAC For Lexus
RESOURCES: Lexus Resource V103
ROBOTO: Font data copyright Google 2014

If you have any further questions, call our toll free technical help line at: 1-800-621-369Sx3

©2017 SCOSCHE INDUSTRIES, INC.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>