Scosche SUHWD-2PKXCES0 Select Suction Cup Phone Mount Holder Operational Guide
- June 3, 2024
- Scosche
Table of Contents
Scosche SUHWD-2PKXCES0 Select Suction Cup Phone Mount Holder
Specifications
- PRODUCT DIMENSIONS: 23 x 5.28 x 6.19 inches
- ITEM WEIGHT: 7 ounces
- SPECIAL FEATURES: Portable, Adjustable, Foldable
- OTHER DISPLAY FEATURES: Wireless
- MOUNTING TYPE: Suction
- BRAND: Scosche
Introduction
The Scosche SUHV-XCES0 Select Vent Mount is the ideal accessory for securely mounting your smartphone to the air vent of your car so you can drive hands- free. Put your phone in between the holder’s movable arms, which can support devices with a width of 2.2 to 4″ broad. The phone holder is cushioned and protected by padding on its side arms and rear. It is simple to open the arms and unlock your phone thanks to the rapid release, one touch push button on the rear of the holder. The foldable bottom feet can be used to increase stability below a larger smartphone. It is simple to move the mount from one vehicle to another thanks to the detachable vent clip.
This handy horizontal and vertical vent mount can be attached to both small and large horizontal and vertical vents, making it the ideal hands-free driving accessory for your smartphone. The phone holder is 2″ deep and 4.6″ tall. You can quickly determine the best viewing angle for your phone using the rotating, 360-degree adjustable holder.
What’s in the box?
- Suction Cup Phone Mount Holder
- User Manual
COMFORTABLE DESIGN
This phone mount’s practical design enables safe and simple one-handed operation of your smartphone. Additionally, while your car is in use, you have access to all of its controls and ports. The phone holder holds phones that are 2.2″ to 4″ wide and measures 4.6″ tall by 2″ deep.
PHONE HOLDER MOUNT FOR CARS
The StickGrip Suction Cup base allows for quick attachment of a mobile device to any flat surface. Sidearms on the holder can be adjusted to fit phones up to 4″ broad. The phone holder is cushioned and protected by padding on its side arms and rear. There are two of these.
Safe And Modifiable
The detachable vent clamps can be used to attach a mobile device to any car vent. Side arms of the holder can be adjusted to fit phones up to 4″ broad. The phone holder is cushioned and protected by padding on its side arms and rear.
Portable
The detachable vent clips are excellent for travelling, changing automobiles, or using with rental cars.
Angle of View is Modifiable
The ideal viewing position for your phone is provided by the spinning, 360-degree adjustable holder.
With Foldable Feet and Quick Release
Your phone is simple to unlock thanks to the quick release, one touch push button on the back of the holder. Larger devices are further secured by foldable bottom feet.
BUTTON OF QUICK-RELEASE
This holder incorporates foldable feet and a quick-release button. When you arrive at your location, it is simple to unlock your phone thanks to the push button on the back of the holder. For larger devices, the holder’s foldable bottom feet provide additional security.
PORTABLE
Reusable and portable, the sturdy suction cup base can be moved from one place to another. This device is great for travelling and for use with rental cars because you can easily secure it. To get the ideal view, you can simply reposition the holder inside your own car.
Note
Products with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are travelling. Before buying, kindly verify compatibility.
Frequently Asked Questions
Is this quick charging?****
This mount has a 12W 2.4A Fast Charging USB Port.
How does this mount compare to the Onn. Brand mount?****
This is the only one I have used.
How long is the flex neck on the suh12v-xces0 select power socket mount? is it similar to the h12vfxm? i need longer than that.****
The Flex neck is 4″ on both the SUH12V-XCES0 and H12VFXM.
How wide is the suction cup part?****
The suction cup has a diameter of 65mm.
Work with mustang?****
This mount works with any vehicle that has a 12 volt power socket.
Will this work for a 2012 honda cr-v?****
This mount will work with any vehicle that has a cigarette lighter plug in.
How do I get the charging port to work for my 2021 Rav 4?****
If the charger is pushed all the way in the 12-volt (cigarette lighter) socket, the USB port should be working. A blue light comes on when it’s seated properly. If it’s all the way in and the blue light doesn’t come on or if the blue light is on, but your phone is not charging, I would guess the stand is broken or your cord is.
It does not come with the usb cord shown in the photo, correct?****
Scosche SUH12V-XCES0 does not include the USB cable.
Is the suction cup dash mount designed to be moved to another location? Is there a trick to getting it unstuck?****
To remove, pull up on the locking lever and pull the tab on the suction cup. This will allow air underneath and release the grip.
What is the size of the ball to mount the base on?****
The ball is 13.55mm.
Can this be used with a larger smart phone? i have a motto z4. it’s 3.5″ wide by 6.5″ tall.****
Yes, the side arms adjust to fit phones up to 4” wide.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>