SCOSCHE 142MP2ODVM MagicMount Pro2 4 In 1 Magnetic Vent or Dash Mount Owner’s Manual
- October 30, 2023
- Scosche
Table of Contents
SCOSCHE 142MP2ODVM MagicMount Pro2 4 In 1 Magnetic Vent or Dash Mount
Product Information
MagicMount Pro2
The MagicMount Pro2 is a versatile and innovative magnetic mounting system that allows you to mount your smartphone or other compatible devices in your car, home, or office. The device comes with a variety of elements, including a mount head, swing arm, vent mount, adhesive dash mount, MagicPlate1 (small and large), protective film, and cleaning wipe. The MagicMount Pro2 is compatible with iPhone 12 or later models, wireless charging smartphones with or without cases, and other compatible devices.
Product Included Elements
- A. MagicMount Pro2 Mount Head
- B. Swing Arm
- C. Vent Mount
- D. Adhesive Dash Mount
- E. MagicPlate1 (small and large)
- F. Protective Film
- G. Cleaning Wipe
Product Device Setup
SECTION A: iPhone 12 or Later (with optional MagSafeTM Case)
If using a case, it must be a MagSafe case (not included) for the MagicMount Pro2 to function properly. Note: MagicPlate not required.
SECTION B: Wireless Charging Smartphones (with Case)
The MagicPlate is required for wireless charging smartphones (with case). Manufacturing materials do not allow adhesives to bond directly to the device.
SECTION C: Dash Mount
The MagicPlate is not required for dash mount installation.
SECTION D: Vent Mount
The MagicPlate is not required for vent mount installation.
Product Usage Instructions
SECTION A: iPhone 12 or Later (with optional MagSafeTM Case)
If you are using a MagSafe case, attach the MagicMount Pro2 to the back of the case. If not using a case, attach the MagicMount Pro2 directly to the back of the iPhone 12 or later model. The MagicPlate is not required for this setup.
SECTION B: Wireless Charging Smartphones (with Case)
Attach the MagicPlate to the back of your smartphone case, then attach the MagicMount Pro2 to the MagicPlate. If your smartphone does not have a case, it is recommended to use the protective film. If you need to remove the MagicPlate, use a credit card and slide it between the film and MagicPlate. Do NOT use anything sharp/hard as this can damage the device.
SECTION C: Dash Mount
Choose a suitable location on your dash and clean it with the supplied cleaning wipe. Peel off the adhesive backing from the dash mount and stick it to the cleaned surface. Attach the MagicMount Pro2 to the dash mount. The MagicPlate is not required for this setup.
SECTION D: Vent Mount
Choose a suitable location on your vent and clean it with the supplied cleaning wipe. Slide the vent mount clip onto your vent and attach the MagicMount Pro2 to the vent mount. The MagicPlate is not required for this setup.
INCLUDED ELEMENTS
- A. MagicMounfM Pro2 Mount Head
- B. Swing Arm
- C. Vent Mount
- D. Adhesive Dash Mount
- E. MagicPlateTM (small & large)
- F. Protective Film
- G. Cleaning Wipe
DEVICE SETUP
- SECTION A: iPhone~ 12 or Later (with optional MagSafe1 M Case)
- SECTION B: Wireless Charging Smartphones (with Case) iPhone® 11 / Pixel 4 & Newer (Case Required) Wireless Charging Smartphones (without Case)
- SECTION C: Dash Mount
- SECTION D: Vent Mount
SECTION A
- iPhone 12 or Later (with optional MagSafe Case)
- If using a case, it must be a MagSafe case (not included) for MagicMount Pro2 to function properly.
- Note: MagicPlate not required.
- iPhone 12 or Later (without Case)
- Note: MagicPlate not required.
SECTION B
Wireless Charging Smartphones (with Case)
- iPhone 11 / Pixel 4 and Newer (Case required*)
- Manufacturing materials do not allow adhesives to bond directly to the device.
Wireless Charging Smartphones (without Case)**
- It is recommended to use the Protective Film. If the MagicPlate needs to be removed, the film simplifies the process. To remove the MagicPlate use a credit card and slide in between the film and MagicPlate. Do NOT use anything sharp/hard as this can damage the device.
SECTION C
Vent Mount
The MagicMount Pro2 4-/n-1 may be assembled in the following configurations:
- Vent Mount with Swing Arm (comes preassembled)
- Vent Mount only
Vent Mount
- Installation
SECTION D
Adhesive Dash Mount
The MagicMount Pro2 4-/n-1 may be assembled in the following configurations:
- Adhesive Dash Mount with Swing Arm
- Adhesive Dash Mount only
Adhesive Dash Mount Installation
Note: Supplied cleaning wipe may cause discoloration of certain plastics, vinyls and painted surfaces. It is recommended to test in an inconspicuous area first.
More Information
MagicMount Pro2 How-To Video …
Scosche Industries
- 1550 Pacific Avenue
- Oxnard, California 93030
- Phone: 800-363-4490 x1 / 805-486-4450 x1
- www.scosche.com
Scoscne, MagicMount, and MagicPlate are all trademarks of Scosche Industries. Other marks or brands are the property of their respective owner’s Devices and or appearance may vary.
©2021 Scosche Industries
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>