SCOSCHE 142PI100CL 100W Mobile Power Inverter Instruction Manual
- June 1, 2024
- Scosche
Table of Contents
SCOSCHE 142PI100CL 100W Mobile Power Inverter
Product Information
The INVERT 100 (Pl100CL) is a mobile power inverter designed for use with
12-volt power outlets. It features a USB port, an AC outlet, LED indicator,
and a 12V power plug for convenient power
conversion.
Specifications
- Input: 12-15VDC, 13A
- Output: 110VAC, 60Hz, 100W (AC outlet), 5VDC, 2.4A (USB port)
Product Usage Instructions
Using the Pl100CL
- Preliminary: Ensure your 12v socket is functional.
- Plug the 12VDC power plug into your 12v socket to activate the Pl100CL.
- The LED will turn green to indicate the unit is powered on.
LED Indicator: Green LED indicates power on, while red LED indicates power protection mode.
If you have any questions or concerns, contact our Tech Support at 1-800-363-4490 ext. 1.
Frequently Asked Questions (FAQ)
-
Q: Can the Pl100CL be used with cigarette lighter sockets?
A: No, the Pl100CL is designed for use with 12-volt power outlets only and should not be used with cigarette lighter sockets. -
Q: What should I do if the LED indicator shows red?
A: The red LED indicates power protection mode. Contact our Tech Support for assistance. -
Q: What is the warranty period for the Pl100CL?
A: For warranty information, please refer to the product documentation or contact Customer Service.
OVERVIEW
- A. USB Port
- B. AC Outlet
- C. LED Indicator
- D. 12V Power Plug
SPECIFICATIONS
- Input: 12-1 SVDC = 13A
- Output: 11 0VAC, 60Hz, 1 00W (AC outlet) / 5VDC = 2.4A (USB port)
Questions?
Need help with your Product?
Call Customer Service at: 800-363-4490
x1
READ THE INSTRUCTIONS COMPLETELY BEFORE INSTALLING
WARNING: Use caution whenever removing or handling plastic parts of any
vehicle.
Unnecessary force or pressure can cause pieces to crack or break.
FOR USE WITH 12-VOLT POWER OUTLETS ONLY. NOT FOR USE WITH CIGARETTE LIGHTER SOCKETS.
Register your product online at www.scosche.com/register
USING THE Pl1 00CL
Preliminary: Make sure your 12v socket is in working condition. Plug the 12VDC power plug into your 12v socket to turn on the Pl1 00CL. The LED will illuminate green to confirm the unit is on.
LED INDICATOR (Green LED = Power On / Red LED = Power Protection Mode)
The unit will enter power protection mode in the following conditions:
- Low Input Voltage – when the input voltage drops below 10.65V~ .0SVDC.
- High Input Voltage – when the input voltage exceeds 15-16VDC.
- Thermal Protection – when the internal temperature exceeds 212°F (100°C).
- Overload Protection – when a consistent load exceeds 150W or USB output current exceeds 4.0A.
For questions or concerns please contact our Tech Support at 1-800-363-4490 ext. 1
SAFETY PRECAUTIONS
Warning: The output of this device is 11 OVAC, the same as a typical wall outlet. We recommend the following precautions when using this device to prevent personal injury.
- Do not insert foreign objects into the AC outlet or ventilation openings in the inverter.
- Do not place the power inverter near any flammable materials, fumes or gasses.
- Do not open the inverter; there are no user-serviceable parts inside.
- Do not expose the inverter to moisture.
- This device is not a toy. Keep the power inverter and its parts away from children.
- Do not leave the power inverter unattended while in use.
- Always disconnect the power inverter when not in use.
Additionally, the following guidelines will help ensure proper operation and prevent damage to the inverter.
- Do not block any of the vent illation openings on the Pl100CL.
- Do not place in a glove box, console or other small enclosure with poor air circulation.
- Do not place the inverter on or near heating vents or any equipment that generates heat.
- Avoid exposure to heat from direct sunlight.
- Do not use the inverter outdoors.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/lV technician for help.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt ASS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. This Class [Bl
digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(8)
For complete warranty details, please visit us at www.scosche.com or call 800-363-4490
For All Australian Sales
- This document details the terms and conditions of the warranty provided with this product. Please disregard any other representations contained on this product’s packaging or provided with this product that constitute or appear to constitute a warranty.
- This warranty is offered by Scosche Industries, 1550 Pacific Ave, Oxnard, CA 93033 United States. We can be called on 805-486-4450 or emailed at sales@scosche.com.
- Subject to the exclusions and limitations set out below, we warrant to you that if you purchase a product directly from us, or from any of our authorized resellers, it will not contain defects that are a result of faulty manufacturer workmanship or materials. This warranty subsists for 1 year from the date of purchase.
- Subject to any rights you have under the Australian Consumer Law, we will not be liable for defects that are a result of damage or loss caused by factors beyond our control, any product that has not been maintained according to any care or maintenance instructions provided with the product, any alterations to a product which are not performed by us, or damage or defects caused to the product due to unusual or non-recommended use. We will not be liable for any special, indirect, consequential or economic loss or damage or loss of profits whatsoever suffered by you or any other person resulting from any act or omission by us.
- Our total liability in respect of this Warranty against Defects is limited to the replacement of the goods.
- Any claim made under this warranty must be made by contacting Scosche Industries. Scosche will then put you in touch with the closest company to you that will cover warranties. All Returns of defective products will be sent at your expense, to be exchanged for a replacement.
- This Warranty against Defects is provided in addition to other rights and remedies that you may have at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure.
References
- Scosche Tech Accessories | #1 Mount Brand in US & Canada
- Product registration | Register your purchase
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>