TREND TP10002ASL Antique Silver Leaf Chandelier Instruction Manual

**TREND TP10002ASL Antique Silver Leaf Chandelier Instruction Manual

**

CAUTION

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

ASSEMBLY AND INSTALLATION

1. Attach the tube (22) to the lamp body (24) and coupling (23) by turning it clockwise until tight.
2. Attach the rod (20) to the top body loop (19) and the bottom frame loop (21). Repeat the process until all four rods are in place.
3. Attach open chain link (17) to the chain (14) and loop (18), then attach open chain link (13) to the chain (14) and screw collar loop (12), and then close the open chain links (13) and (17).
4. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.
   • –Ribbed wire (w/o marking) from light to White wire (2) from power source.
   • Smooth wire (w/o marking) from light to Black wire (3) from power source.
   • Loop the ground wire (4) to mounting crossbar (6) with a ground screw (7).
5. Secure the mounting crossbar (6) with mounting screw (8) to the outlet box (1). Thread hex nut (10) onto nipple (11), Insert lock washer (9) and thread the nipple (11) into the mounting crossbar. Secure with the hex nut (10).
6. Slide screw collar loop (12) over canopy (15), then thread screw collar loop (12) into the threaded ring (16) and screw collar loop (12) onto nipple (11). Secure threaded ring (16).
7. Install bulbs: (bulbs not included)
   (Do not exceed the maximum capacity recommended on the sockets).

Product Descriptions

1. OUTLET BOX
2. WHITE WIRE
3. BLACK WIRE
4. GROUND WIRE
5. WIRE CONNECTOR
6. MOUNTING CROSSBAR
7. GROUND SCREW
8. MOUNTING SCREW
9. LOCK WASHER
10. HEX NUT
11. NIPPLE
12. SCREW COLLAR LOOP
13. OPEN CHAIN LINK
14. CHAIN
15. CANOPY
16. THREADED RING
17. OPEN CHAIN LINK
18. LOOP
19. BODY LOOP
20. ROD
21. FRAME LOOP
22. TUBE
23. COUPLING
24. LAMP BODY

Extra crystals are provided for re placement

INSTALLATION IS NOW COMPLETED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>