trend EN847 Circular Saw Blades Instruction Manual

Table of Contents

trend-EN847-Circular-Saw-Blades-PRODUCT

Specifications

Safe operation

When using the sawblade, ensure that the maximum cutting depth of 1mm is not exceeded.
Observe the specified speed range for safe operation. If the blade is worn beyond usability, replace it as shown in Fig. 1.

Materials and Extraction

This saw blade is designed for cutting non-ferrous metals.
Make sure to use extraction methods approved for the specific application to maintain a clean and safe working environment.

Professional use

Only operate the sawblade if you have professional training and experience in the field.
Familiarize yourself with the design and construction requirements, and adhere to safety regulations.
Perfect clamping tolerances must be maintained, following both national and international standards.

Warranty

This product comes with a manufacturer’s warranty. Refer to our website for detailed warranty conditions.

FAQ (Frequently Asked Questions)

Q: Can this sawblade be used on ferrous metals?

Q: What should I do if the sawblade exceeds the maximum cutting depth?

A: Stop using the sawblade immediately and replace it following the instructions provided in the manual.

Q: Is there a specific speed range I should follow when using this sawblade?

A: Yes, always observe the speed range indicated in the manual for safe and efficient operation.

Observe the safety warnings of the power tool/woodworking tool being used.

Select suitable circular saw blades for the material being used.
Observe the thickness of the receiving knife and the instructions of the machine.
Before using, check the saw teeth, machine settings, and rotation direction. Use only saw blades that are in perfect condition.
Use the original packaging for storage and transportation.

Maximum speed:

The maximum speed given on the circular saw blade may not be exceeded. Observe the speed range (as far as indicated).

TC circular saw blades:

Circular saw blades that have cracks or tears in their main body must be replaced. Repairs are not permitted.
TC circular saw blades with saw tooth dimensions below 1mm may no longer be used – (Fig. 1).

Steel circular saw blades:

Circular saw blades with visible cracks may not be used.
Circular saw blades must be inserted into hand-held circular saws only when the saw is equipped with a self-closing blade guard.
Only use dry-cut circular sawing machines to work with ferrous and non-ferrous metals. Use extraction that is permitted for the particular application.

Fastening Circular Saw Blades & Machine Components

When replacing a saw blade, rule out the accidental starting of the power tool/woodworking machine.
Mount and secure the circular saw blade according to the regulations of the machine manufacturer. Observe the regulations specified by the machine manufacturer.
Circular saw blades and machine components must be clamped in such a manner that they cannot become loose during operation.
Observe the information supplied by the manufacturer.
When mounting the circular saw blade, make sure that the hub of the tool is properly clamped and that the saw blade teeth are not in contact with any part of the machine (no grazing).
Extending spanners or using hammers or similar for tightening purposes is not permitted.
The clamping surface must be free of grease, oil, and water.
The use of loose-fitting reduction tings or bushings is not permitted.
The use of secure fitting Trend rings, e.g. pressed in or held through adhesion, is permitted if they are correctly mounted under – (Fig. 2) (see cover pages).
The ring thickness must always be smaller than the thickness of the base blade body.

Repair of Circular Saw Blades

When repairing, the design of the TC circular saw blades must not be changed.
TC circular saw blades may only be repaired through competent persons with professional training and experience who know the design and construction requirements and understand the safety regulations to be achieved.
Tolerances that ensure perfect clamping must be observed. Observe valid national and international standards.