baby trend TJ94XXXD Expedition Jogger Travel System Instruction Manual

baby trend TJ94XXXD Expedition Jogger Travel System

Product Information: EZ-LiftTM 35 PLUS Infant Car Seat

The EZ-LiftTM 35 PLUS Infant Car Seat is a product by Baby Trend, Inc. It comes with a stroller and an instruction manual for assembly and usage. The product is designed to ensure the safety of your child when using it.

Warranty

The product comes with a warranty. Please refer to the instruction manual for details.

Parts

The product comes with the following parts:

• Front Wheel*
• Parent Tray
• Rear Wheels (2x)*
• Fender
• Base

*This wheel has a double nut locking system. Please follow all instructions carefully to ensure safety.

Warnings
Please follow all instructions to ensure the safety of your child. Failure to do so could result in serious injury or death. Some important warnings include:

• Always use the safety harness and ensure that the children are properly positioned.
• Never leave children unattended.
• The wheel can detach and cause tip over. Pull on the wheel to ensure it is securely attached.
• Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

Product Usage Instructions

Please follow these instructions carefully to ensure safe operation of your stroller. Adult assembly is required. Keep child away during unpacking and assembly.

Inspection
Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

Assembly

Check that you have all the parts for this model before assembling the stroller. Please refer to the instruction manual for detailed assembly instructions. Some important instructions include:

• To attach the front wheel, follow the double nut locking system instructions carefully.
• To attach the rear wheels, push each wheel’s axle into the plastic corner fitting. Depress the metal lever on the inside of the corner fitting as you push the axle into corner fitting. When the wheel will not go in more, release the lever. Check that the wheels are securely attached.
• Be careful when folding and unfolding the stroller to prevent finger entrapment.

Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.

TJ94XXXD

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages /limited-warranty for complete warranty details.

Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

PARTS

Check that you have all the parts for this model before assembling the stroller.

• Wheel styles may vary.

• Los estilos de las ruedas pueden variar.
  ** Please refer to the manual located under the car seat for base type and instructions

  • WARNING : Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference.
  • WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use the safety harness and insure that the children are properly positioned according to these instructions.
  • WARNING : Never leave children unattended.
  • WARNING: FALL HAZARD: Wheel can detach and cause tip over. Pull on the wheel to ensure it is securely attached.
  • WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.
  • CAUTION : This single jogger is designed for one child only. Use with more than one child may cause the unbalance condition which can injure/harm your child.
  • Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause hazardous unstable conditions.
  • The maximum weight that can be carried in the basket is 5 lb. (2.26 kg), child tray and parent tray are 3 lb. (1.36 kg) each. If equipped, the maximum weight can be carried in the side pockets (2) is 3 lb. (1.36 kg), back pockets (2) is 3 lb. (1.36 kg) and canopy pockets is (2) 1 lb (0.45 kg).Excessive weight may cause a hazardous unstable condition to exist.
  • Be certain the stroller is fully erect and latched in the open position before allowing the children near the stroller.
  • Use of the stroller with children weighing more than 50 pounds (22.67 kg) or over 42 inches (106.7 cm) tall, will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
  • NEVER use the stroller on stairways or escalators.
  • NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.
  • Baby Trend® recommends that the child occupant be at least 6 months of age prior to use of the stroller for jogging. Because children develop at different rates, please discuss the use of a jogging stroller with your health care provider prior to jogging with your child.
  • NEVER allow your stroller to be used as a toy.
  • To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.
  • Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.
  • Discontinue use of stroller should it malfunction or become damaged. Please contact our customer service Parts Hotline to arrange for repair or obtain replacement parts.

ASSEMBLY

• IMPORTANT! To ensure safe operation of your stroller, please follow these instructions carefully. Please keep these instructions for future reference.
• IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
• IMPORTANT! Adult assembly is required. Keep child away during unpacking and assembly.

The front wheel, rear wheels, fender, child tray, and parent tray need to be installed prior to use.

FRONT WHEEL
WARNING : This wheel utilizes a front wheel double nut locking system. Please follow all of these instructions to ensure the safety of your child. Failure to follow these instructions could result in serious injury or death.

• Unlock the release lever (Fig. 1a).

• Destrabe la palanca de liberación (Fig. 1a).

• Unfold stroller frame by pulling backward on the stroller handle.
  Lean the stroller backwards so that it rests on the handle and rear axle frame and the front wheel forks are pointing upward (Fig. 1b).

• Despliegue el armazón del carrito tirando hacia atrás del manubrio. Incline el carrito hacia atrás de modo que se apoye sobre el manubrio y el armazón del eje trasero, y que las horquillas de la rueda delantera apunten hacia arriba (Fig. 1b).

INSTALLING THE FRONT WHEEL

• If preassembled skip to Step 5. Slide the front wheel onto the front forks (Fig. 2).
• Ensure the front forks both click into place to the front wheel housing (Fig. 3).
• Removal: For the front wheel removal, press the tabs located inside the front wheel housing to remove the front forks from the wheel (Fig. 4).

REAR WHEEL

• Lean the stroller forward to rest on the front wheel. To attach the rear wheels, push each wheel’s axle into the plastic corner fitting (Fig. 5). Depress the metal lever onthe inside of the corner fitting as you push  the axle into corner fitting. When the wheel will not go in more, release the lever. Check that the wheel has locked into the corner fitting by pulling on the wheel. If not locked, lift upward on the lever, push the wheel on farther and release lever.
• Ensure that the wheels are firmly locked into place. NEVER use the stroller if the wheels are not locked into place.

CHILD TRAY
WARNING : Do not place hot liquids or more than 3 pounds in the child tray. Serious burns or unstable conditions could result

• To attach the child tray: Push the angled tray onto the post at the end of the right armrest, while pressing downward on the snap button, until locked into place (Fig. 6a). Rotate the tray downward until latched onto the left armrest. Please check that the snap button comes through and securely latches the tray in place (Fig. 6b).
• To access the child seat: press inward on left side tray release button and rotate upward on the tray (Fig. 7).
• To remove the child tray: Press the release button and rotate the tray 180 degrees and pull the tray until it released (Fig. 7).

SEATBACK POSITIONING

• To recline the seat, press the adjustment tabs and pull down while holding the hoop. To place the seat into an upright position, hold the hoop and push the adjustment upward. The strap will lock automatically (Fig. 8). The upright position should be used only for a child that is at least 6 months old. Always re-adjust the safety harness, including the shoulder belts, when repositioning the seatback.

PARENT TRAY
WARNING: Do not place hot liquids or more than 3 pounds in the parent tray. Serious burns or unstable conditions could result.

• To attach the parent tray, align the fittings on the ends of the parent tray with the fittings on the outsides of the handle. Hook the hole in the parent tray. Pull outward on the opposite end while pushing down on the tray until locked onto the stroller handle. Please be careful not to pinch your fingers when installing the parent tray (Fig.9). To remove the parent tray, pull outward on one end of the tray while lifting upward.

STORAGE BASKET

If adjustment is necessary:

• Wrap the 2 straps on the basket rear around the rear axle and snap them closed (Fig. 10).
  NOTE: Be sure that all snaps are secure before use.

CANOPY

• If not already installed: Insert the canopy into the stroller frame and ensure both sides click in (Fig. 11a).
• NOTE: Check the following steps (Fig. 11b through Fig. 11c) to ensure all installations. Adjust only if needed. Wrap the elastic around the stroller frame to band and catch. On both sides of the canopy, attach the hook and loop (Fig. 11b).
• Use the buttons to attach the straps to the rear of the seat fabric (Fig. 11c).
• To open the canopy: pull forward on the front edge of the canopy. To close the canopy: push backwards on the front edge towards handle (Fig. 11d).

INFANT CAR SEAT

Compatible with the following Baby Trend® Car Seats:
EZ Lift, EZ-Lift PLUS, EZ-Lift PRO. and SECURE.
(visit babytrend.com for compatibilty chart)

WARNING: Avoid serious injury from falling or sliding out, always use the Infant Car Seat harness.

ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car Seats must attach to the module of the strollers front seat. These models require child tray and seat back adjustment to the most reclined position.
NOTE : To make seat position adjustments refer to step 13.

CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car Seats

Car seats module connection

• Close the canopy as needed to accommodate the car seat (Fig. 12a).
• Align the car seat module to the inner frame connectors. Carefully rest the car seats lower rear against the angle point of the tray. Latch the module into the stroller frame. Press down firmly for the click. ALWAYS ensure that the car seat is properly connected and locked onto the stroller before each use by lifting on the car seat handle (Fig. 12b).

Removing the car seat:

• NOTE: Set handle to the carry position (Fig. 12c). Squeeze the release handle located at the Top-rear of the car seat and lift away from the stroller (Fig. 12d)

OTHER COMPATIBLE CAR SEATS

• Put the stroller seat in the full recline position, See (Fig. 8). Turn car seat support tabs on the stroller frame (Fig 13a).
  Car Seat Support Tabs are Only used for the infant car seat. Check that the front child tray is firmly attached to the stroller armrests

• Position the infant car seat so that it faces toward the rear of the stroller. Push the car seat into the front tray until it latches into place (Fig. 13b). The rear of the car seat rests on the support tabs. Put the stroller seat in the most upright position for additional support, See (Fig. 8)

• Always secure the single short clip over the infant car seat through the belt path. (Fig.13c). It is very important that the short clip is always tightly fastened around the infant car seat.

• To remove the Infant Car Seat, Remove the short clip (Fig. 13d), squeeze the release handle located at the Foot-End of the seat and carefully lift upward on the seat (Fig. 13e).

• Applies to all models: Rotate the support tabs up when not using the car seat (Fig. 13f).

SAFETY SEGURIDAD

BRAKES
WARNING: Always check with your pediatrician for a recommended starting age / weight for your baby in an all terrain stroller.
WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

• To engage brakes, apply light downward pressure to the brake lever located on each rear wheel. The stroller may require slightforward or rearward movement to line up the teeth on the brake with each wheel brake cluster (Fig. 14). NOTE: Check that the stroller will not move and that both brakes are properly applied. To release, gently lift on the brake lever.

FRONT WHEEL LOCK
WARNING : FALL HAZARD: From tip over before running, jogging, or walking fast, lock the front wheel from swiveling.

• The front wheels are equipped with a swivel locking device. Push the button on each wheel upward to engage the locks and push downward to disengage the locking device (Fig. 15).

TESTING FOR PROPER WHEEL INSTALLATION

WARNING: FALL HAZARD: ALWAYS check the double nut locking system before each use to ensure that the front wheel is securely fastened to the frame.

• Lift the front of the stroller off the ground and pull down on the wheel to make sure it is secure (Fig. 16).
  NOTE : The wheel must not come of

• If you experience front wheel wobble that is beyond what is normal for use while walking or jogging you may have to adjust the front wheel housing nut. This nut is located under the Fender located at the front of the jogger (Fig. 17). To remove the fender reverse Step 18. You can use a standard crescent wrench to tighten the nut. DO NOT OVER TIGHTEN this can cause damage to the wheel housing.

FENDER
To secure the fender to the frame, use the 4 screws provided. Skip this step if preassembled.

• Align the 4 holes under the fender with the 4 holes on the tubes of the front frame assembly (Fig. 18a).
• Place in the front fender and press onto the front frame assembly (Fig. 18a). Insert the 4 screws through the underside of the front frame assembly into the front fender’s plastic tubes. Tighten the screws only until snug (Fig. 18b). DO NOT OVER
  TIGHTEN.

TO SECURE THE CHILD
WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.
STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

• The shoulder straps of the 5-point harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the top of the child’s shoulder (Fig. 19a)
• Carefully place the child in the stroller seat and bring the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child’s waist and over the child’s shoulders (Fig. 19b).

TO RELEASE THE CHILD

• To release, push Red Button on Center Clasp, the two Harness Buckles will pop free (Fig. 20).
• Unhook the shoulder straps only if adjusting the harness positions (Fig. 21)

JOGGING WITH YOUR STROLLER

WARNING: Never jog or run with your newborn in the car seat position.
Use for strolling only.
STRANGULATION HAZARD! Children have strangled when straps have wrapped around their neck. When not in use hook the tether strap onto the stroller handle. Keep this stroller tether strap out of the reach of children.

• SAFETY WRIST STRAP: Always connect thesafety strap to either wrist when jogging. This strap will keep the stroller from rolling away in the event that you trip while running (Fig. 23a). The safety strap must always remain connected to the rear lower frame cross member. Thislocation is intended to prevent the stroller being tipped backward if you do fall to the ground. The safety strap includes a Velcro attachment for  storage, on the left side of the stroller, when not in use (Fig. 23b).

TO FOLD STROLLER
WARNING: Care must be taken when folding the stroller to prevent finger entrapment.
CAUTION: Do not allow children near stroller while folding.

• Close the canopy as described in the canopy section. Recline seat by releasing buckle as described in seatback positioning section.
• The stroller is folded by simultaneously pulling each trigger fold (Fig. 24a). When the fold latches are released, the handle will begin to fall toward the floor. Release the fold buttons and pressdownward on the stroller handle until the stroller is completely folded.
• Secure the stroller in the folded position by locking the fold latch, located on the right side of the stroller, over the rivet that protrudes from the frame (Fig. 24b).

TO UNFOLD STROLLER
WARNING : Care must be taken when unfolding the stroller to prevent finger entrapment.
CAUTION : Do not allow children near stroller while unfolding.

• Stand the stroller on the ground with all three wheels touching the ground. Release the folding latch, which is located on the right side (Fig. 25a).
• Lift up on the stroller handle with both hands until the stroller frame is erected and locked in the open position (Fig. 25b). The stroller has spring-loaded latches on both sides of the frame.
  NOTE : Test that both latches are fully engaged prior to placing your child in the stroller.

MAINTENANCE

Check the pressure before using the stroller.
Tires are shipped un-inflated. The tires should be inflated on a regular basis to the P.S.I. specified on each tire.
NOTE: Only use hand pump.
DO NOT USE air compressor to inflate the tire. *Pump not included.
DO NOT INFLATE above the maximum recommended inflation pressure that is on the side of the tire.

FENDER

Refer to step 27 as needed for replacement purposes. ****

• Examine the bottom of the front fender. You will notice four 1/4 inch diameter plastic tubes protruding from the bottom (Fig. 27a).
• These tubes must be lined up with the holes in the front frame assembly (Fig. 27b).
• Line up the front fender and press onto the front frame assembly (Fig. 27c).
  Insert the 4 screws through the underside of the front frame assembly into the front fender’s plastic tubes. Tighten the screws only until snug (Fig. 29d).
  DO NOT OVER TIGHTEN.

WHEEL ADJUSTMENT:

• It should be noted that all three wheel vehicles can be easily influenced to deviate from a straight line. In most cases strollers can tend to pull to the right/left due to many factors including uneven tire pressure, improper wheel installation, road conditions and manufacturing tolerances. If you find your Baby Trend stroller to significantly track or pull to the left or right while use on flat terrain, follow the sequence of the instructions on page 24 to realign your front wheel.

FLAT TIRE:

• The jogging stroller features bicycle tires to allow for extended wear and ease of pushing. Just like a bicycle tire, the jogging stroller can suffer from flat tires. If you have a flat tire, you can use a standard bicycle tire repair kit to repair the tire or youcan take the tire to a bicycle shop for repair. If you experience numerous flat tires,  you may want to purchase thorn proof inner tubes for the jogging stroller. These can be purchased at bicycle stores or at many national retail stores. The correct size to purchase is shown on the sidewall of the tire.

BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00am and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

References

• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>