TREND TP20016AB Brass Mini Fixture Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND TP20016AB Brass Mini Fixture
INSTALLATION
- OUTLET BOX
- WHITE WIRE
- BLACK WIRE
- GROUND WIRE
- WIRE CONNECTORS
- HEX NUT
- GROUND SCREW
- MOUNTING BAR
- BOX SCREW
- NIPPLE
- LOCK NUTS
- NIPPLE
- REINFORCING PLATE
- CANOPY
- BALL NUT
- SHORT NIPPLE
- STEM (L3”)
- STEM (L6’’)
- STEM (L12’’)
- LAMP BODY
- LAMP BODY
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90°C supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
- Put reinforce plate (13) against canopy (14), then put nipple (12) through the holes on canopy (14) and secure with lock nuts (11) and short nipple (16).
- Choose your desired length of stems (17)(18)(19), and then pass the power supply cord and ground wire through stems (17)(18)(19), short nipple (16), canopy (14), and lock nuts (11).
- Connect stems (17)(18)(19) one by one, then attach the lower end of the stem (19) onto the lamp body (20)(21) and the upper end of stem (17) into a short nipple (16).
- Attach nipple into mounting bar (08) and secure with hex nut (06).
- Attach mounting bar (08) to outlet box (01) with box screws (09).
- Make wire connection with white wire (02) and black wire (03). Use wire connectors (05) to secure the connections. Secure ground wire (04) and ground wire from the fixture to the mounting bar (08) with ground screw (07).
- Attach the canopy(14) against the outlet box(01) and secure with the ball nuts (15).
- Install bulbs (not included). Do not exceed the maximum wattage recommended on sockets.
INSTALLATION IS NOW COMPLETE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>