TREND TT80010AB Brass Table Lamp Installation Guide
- June 3, 2024
- trend
Table of Contents
TREND TT80010AB Brass Table Lamp
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct
branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions.
ASSEMBLY AND INSTALLATION
-
Loosen the harp caps on harp (03) and insert the bottom ends of harp (03) into saddle (04).
-
Tighten the harp caps on harp (03) until they cover the two-pronged saddle (04).
-
Unscrew the finial (01) from the top of harp (03).
-
Place shade (02) over the harp (03) making sure the harp top extends through the top ring of shade (02), and secure shade (03) with finial (01).
-
Install bulb (not included).
DO NOT EXCEED THE SPECIFIED WATTAGE.
INSTALLATION IS NOW COMPLETE -
FINIAL
-
SHADE
-
HARP
-
SADDLE