TREND BP6008 Luminary Small Pendant Instruction Manual
- June 3, 2024
- trend
Table of Contents
BP6008
INSTALLATION INSTRUCTIONS
BP6008 Luminary Small Pendant
Please read carefully and save these instructions, as you may need them at a
later date.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct
branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions.
ASSEMBLY AND INSTALLATION
- Secure the mounting bar(9) to the outlet box(1) with box screws(6)
- Pull the outlet wire and ground wire from the outlet box. Make wire connections with wire connector(2)
- Black wire from light to Black wire (3) from power source.
- White wire from light to White wire(4) from power source.
- Loop the ground wire(5) to mounting bar(9) with a ground screw(6).
- Attach the canopy(11) against the outlet box(1). Secure with the ball nut(12) and mounting screw(7).
- Loosen the ball nut(13) and insert the bulb (15) into socket(14).
- Put the bulb into the shade(16) and tighten the ball nut (13).
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
| 1. OUTLET BOX | 9. MOUNTING BAR |
|---|---|
| 2. WIRE CONNECTOR | 10. GROUND SCREW |
| 3. BLACK WIRE | 11. CANOPY |
| 4. WHITE WIRE | 12. BALL NUT |
| 5. GROUND WIRE | 13. BALL NUT |
| 6. BOX SCREW | 14. SOCKET |
| 7. MOUNTING SCREW | 15. BULB |
| 8. HEX NUT | 16. ALUMINUM SHADE |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>