Guanyu GY-Z17 3 In 1 Foldable Wireless Charger User Manual
- June 3, 2024
- Guanyu
Table of Contents
Guanyu GY-Z17 3 In 1 Foldable Wireless Charger
Note:
To ensure safe and efficient charging of 3 devices, you use a 9V/2A adapter or
above(Qualcomm Quick Charger 2.0 or 3.0) and fast charging cable (if you don’t
use a suitable adapter and fast charging cable, the charger may not be able to
charge the phone or may not Charging 3 devices at the same time or may even
damage the charger).
PRODUCT INTRODUCTION
The 3-in-1 Wireless Charger is a multi-function charging station, you can charge three smart devices (smartphone, iWatch, and earbuds) on our product at the same time. It is compatible with enabled smartphones, iWatch, and AirPods.
It is a unique design with an elegant appearance, and perfect to use at the office or at home. It is very convenient to charge your smart devices on our product, especially for Apple users.
PRODUCT APPEARANCE
CHARGING METHOD
Flat/Foldable
LED LIGHT INSTRUCTIONS
HOW TO USE
COMPATIBLE DEVICES
-
iPhone
All Apple series -
Apple Watch
Apple Watch S8/S7/S6/SE/S5/$4/S3/$2/Ultra/Hermès. -
Earbuds
Airpods (1st generation) /AirPods (2nd generation) /AirPods Pro/AirPods (3rd generation).
PRODUCT SPECIFICATION
- Input: 9V/2A
- Output(Phone): 5V/2A(10W Max)
- Output(Watch): 2.5W
- Output(Earbuds): 5V/1A (5W Max)
- Input Port: Type-C
- Conversion Rate: 290%(Phone)
- Product Size: 156x76x10mm (fold)
PACKING LIST
- Plug-in charging X 1
- User manual X 1
- Type-C quick charging cable X 1
FAQ
If you’re experiencing interrupted or slow charging, check the following:
- The back of your devices should not have any metal, pop sockets, or credit cards.
- Put the devices in the center of the charging surface (this lets the charging coil in your devices line up with the one inside the wireless charger).
- Check whether the adapter is QC 3.0 fast charger.
If you’re failing to charge your device, please try out the following:
- Please restart your cell phone and test with another Type-C charging cable.
- Please check whether the indicator turns on or not.
- Please check whether the Adapter is QC3.0 Quick Charger (Output:9V/2A) or not.
Charging slow:
Charging efficiency depends on the receiving power of your devices, and do not
keep those apps keep running during charging.
The phone is charging intermittently, or the indicator light flashes:
If the charging current is not enough, please use an adapter with sufficient
power 9V/2A or 12V/2A above.
Charging fever:
It is normal for the receiving coil or transmitter board to generate heat
during wireless charging. If the wireless charger is too hot, please take your
devices off it, when the wireless charger is cooled down, please charge it
again.
The charger does not work.
Do not put metal debris or magnetic cards in the charging area. If the product
does not work due to overheating. please take off the phone and charge it
again when it is cooled down. If there are other problems, please contact our
after-sales for a solution.
TIPS
- This 3-in-1 wireless charging station only supports Apple Watch S8/S7/S6/SE/S5/S4/$3/$2 /Ultra/Hermès. (Note: Apple watch series 1 is not supported)
- Do not charge the charging station of Apple products from the computer USB interface or other power converters.
- When charging, place the enabled device in the center of each wireless charging area.
- Make sure your device is in the middle of the cordless charger area.
- The silicone shell of iWatch and AirPods may cause abnormal charging. It is best to take it off before charging.
WARNING
- Avoid using the product at places that are wet, humid, or have high temperatures.
- Avoid dropping the product from high places.
- Do not disassemble the product by yourselves. Please contact us if necessary.
- Do not clean the product unless the unit is powered off.
- It is recommended to use an 18W or above adapter to charge 3 smart devices at the same time.
All products brands and trademarks are the property of their respective owners.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party respond sible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits of Class B
digital devices, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator and your body: Use only the supplied antenna.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.