Guanyu

Guanyu GY-Z5M Fast Wireless Charger

PRODUCT INTRODUCTION

The 3 in 1 Wireless Charger is mulfi 1uncfion charging stabon, you can charge three smart de”ces (Q1 smartphone, watch, and earbuds) on our product at the same bme. It,s compatible “‘th Q, enable smartphone, watch, 1” rods.
It 1s a unique design v.<lh elegant appearance and is perfect to use at the office or at home. It 1s very convenient to charge your smart devices on au product, especially for lo users.
There 1s protection of over-charge and FOD 1unction, you can enjoy your charging experience safely You can tum off the light

PRODUCT APPEARANCE

1.  For bringing the i’Natch charger
2. Phone charging area
3. Apple 8-pin
4.  Light Switch
5. anti-Slip Silicone
6.  LED Indicate Light
7.  Type-C Port
8. USE! Port
9.  For fixing install cable
10. anti-Slip Silicone
11. Label area
12. Coding Vent

HOW TO CHARGE

1. Plug-In the Type-C cable to power, less chargee
2. Connect IWatch’s charger ta USB socket of our product thenfixts charging cable Into maed area, put Watch a tap of the cha,ge「 to charge (ast watch strap to newest position v.<11 be better).
3. Put enable decides to start charging.

LED LIGHT INSTRUCTIONS

CHARGING SCHEMATIC DIAGRAM

APPLICABLE DEVICES

1.Smart Phone: OApple: iPhone 13,13 Pro,13 Pro Max13 Mini,1212 Pro,12 Pro Max12 Mini, SE,11,11 Pro,11 ProMax Xs, Xs Max,XR,X88 Plus. Samsung Galaxy S: 21 5621+5G,21 Ultra 5G,20 FE 5G,20 5G, 20+5G, 20 Ultra 5G,1010+10e, 9,9+8,8+,77 edge,6,6 edge,6 edget, 6 G9209,6Active. Galaxy Note:10,10e,10+9,8,76,5. LG: G2(Vs980,Verizon version), G3,G6, G6G7,G7 ThinQ, G7+ ThinQ, G8G8 ThinQ, V30,v30+V35,V40 ThinQ, V50, V50 Thina, LG Lucid2 (VS870),LG Optimus F5(As870), LG Optimus 3, Spectrum 2,0ptimus GPr,Optimusill, Optimus LTE 2,etc. OMOTOROLA Draid Turbo,Droid Turbo2,Droid 5,Moto MaxxUltra M,Moto XForce. Huawei: P30 Pro,P40 Pro,P40 Pro+Mate: 40E, 40 R S,4Prot,40 Pro,40,30E Pro,30 5G,30 Pro 5G,30,30 Pro, 30 RS,20 Pro,20 RS, RS. 6Xaomi: 10,10 Pro,99Pro,Mix 3,Mix 2s.Including otherdevices with wireless charging receiver built-in. (Nole: Al devices must meet the Qi standard). 2. Smart Watch Apple: iWatch SE, S7, S6, S5,S4,$3,$2, $1. 3.Earbuds: Apple: AirPods Pro, AirPods 2, AirPods 1,

PRODUCT SPECIFICATION

Input 9v/2A, 9V2.7A or12V/2A Input socket Type-C Conversion Rate(Phone): 273% Product Size: 136X124X126.5mm Phone Output 15WiW/r.5W/5N Earbuds Output 2.0W iWatch Output 2.5W

PACKING LIST

Wireless Charger 1, Type-C quick charge cable 1, User manual * 1

FAQ 1.

If you’re experiencing interrupted or slow charging, check the following:

1.  The back of your phone should not have any metal, pop sockets, or credit cards.
2.  Put the phone in the center of the charging surface (this lets the charging coil in your phone lineup with the one inside the wireless charger)
3.  The wireless charging coil on Sony phones is located slightly below the center.
4.  Phone cases should be no thicker than 5 mm for effective charging
5. Check whether the adapter is Qc3.0 fast charger

If you’re failing to charge your device, please try out the following

1.  Please restart you cell phone and test with another U SB cable.
2. Please check whether the indicator tums on or not
3. The wireless charging coil on Son phones is located slightly below the center.
4. Phone cases should be no thicker than 5 mm for effective charging
5. Check whether the adapter is QC3.0 fast charger.
6. If you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are stl experiencing issues, try this: Replacing the cable connecting your wireless charger Rebootngyour phone.  Unplug the adapter and reinsert  Charging is stll sow The mobile phone itself or the external receiving coil allows the wireless charging current to be different or the application running consumes a lot of power when the mobile phone is charging. Itls recommended to reduce or close the application: The phone is charging intermittently, or the indicator light flashes If the charging current is not enough, please use an adapter with sufficient power 9v/2A or 18W above.  Charging fever. Itis normal for the receiving coil or transmitter board to generate heat during wireless charging. If the wireless charger is too hot please take your phone of it, when the wireless charger is cooled down, please charge it again. The charger does not work. Do not put metal debris or magnetic cards on the charging area. If the product does not work due to overheating. please take off the phone and charge it again when it is cooled down 8. If there are other problems, please contact our after-sales for a solution.

WARNING

1. Avoid using the product at places that are wet, humid or have high temperatures.
2. Avoid dropping the product from high places.
3. Do not disassemble the product by yourselves. Please contact us if necessary.
4. Do not clean the product unless the unit is powered off.
5. It is recommended to use an 18W or above adapter to charge 3 smart devices at the same time.

FCC Statement

This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>