G4M GA-20E 20W Guitar AMP Head With Effects User Manual
- June 13, 2024
- G4M
Table of Contents
G4M GA-20E 20W Guitar AMP Head With Effects
Product Information:
GA-20E 20W Guitar Amp Head with Effects
The GA-20E is a 20W guitar amp head with built-in effects. It is designed to deliver powerful and versatile sound for electric guitars. The amp head features a compact and durable design, making it suitable for both studio recording and live performances.
The amp head includes various built-in effects, allowing users to enhance their guitar sound with ease. These effects include reverb, delay, chorus, and distortion. With the amp head’s intuitive controls, users can easily adjust the settings of these effects to achieve their desired sound.
Product Usage Instructions
-
Ensure that the amp head is placed in a well-ventilated area away from heat sources such as radiators or direct sunlight.
-
Avoid placing the amp head in areas with excessive dust, mechanical vibration, or shock.
-
Do not expose the amp head to dripping or splashing liquids.
Avoid placing objects filled with liquids, such as vases, on top of the amp head. -
Avoid placing any naked flame sources, such as lighted candles, on the amp head.
-
Make sure to allow adequate air circulation around the amp headand avoid obstructing any vents present on the device. Do not cover the amp head with items like newspapers, tablecloths, or curtains.
-
The mains plug should be easily accessible and used to connect or disconnect the amp head from the mains supply. If any abnormalities are noticed with the appliance, remove the plug from the mains outlet.
-
When using the amp head, adjust the volume and tone controls to your preference.
-
To activate the built-in effects, use the designated controls on the amp head. Adjust the settings of reverb, delay, chorus, and distortion as desired.
-
Connect your electric guitar to the input jack of the amp head using a suitable instrument cable.
-
Connect the amp head to a speaker cabinet using a speaker cable.
-
Power on the amp head and adjust the master volume to a suitable level.
-
Play your guitar and enjoy the amplified sound with the desired effects.
Refer to the user manual for more detailed instructions on specific features and controls of the GA-20E guitar amp head.
WARNING!
- Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.
- Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock.
- The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product.
- No naked flame sources, such as lighted candles, should be placed on the product.
- Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventillation must not be impeded by covering the appliance with items such as newspapers, table-cloths, curtains etc.
- The mains plug is used to disconnect the appliance from the mains supply. Ensure that the mains outlet is easily-accessible and remove the plug from the mains outlet if you notice any abnormality with the appliance.
Guitar Amp Head
Thank you for purchasing the GA-20E Guitar Amp Head with Effects. To get the most out of your product, please read this manual carefully.
FEATURES
- Explore your creativity with five distinct gain stages and built-in reverb.
- Push sonic boundaries at the hands of an effects loop.
- Ideal for practice thanks to aux input and headphones jack.
- Connect your effects pedals to expand your tonal possibilities even further.
Overview
-
INPUT
Connect your guitar here using a 6.35mm jack cable. -
VOLUME
Use this control to determine the volume of the clean channel. -
CH. SELECTOR SWITCH
Use this button to select the clean channel. -
DRIVE MODE
Use these buttons to alternate between the various drive modes.-
CRUNCH
Light breakup with a hint of gain providing rounded, warm tone. -
OVERDRIVE
The act of pushing your valve amp’s tubes to the point of breaking up to imbue a more saturated tone. -
LEAD
Bright and cutting, perfect for boosting your solos nicely above the mix, with a rich driven tone. -
METAL
Excessive gain creates heavy, aggressive distortion.
-
-
GAIN
Use this control to determine the amount of distortion present in your signal. -
VOLUME
Use this control to determine the volume of drive channel. -
BASS
Use this control to determine the amount of low frequency content present in your tone. -
MIDDLE
Use this control to determine the amount of midrange present in your tone. -
TREBLE
Use this control to determine the amount of high frequency content present in your tone. -
REVERB
Use this control to determine the amount of reverb present in your tone. -
AUX IN
Use this input to connect your media device via a 3.5mm cable for audio playback through the speaker. -
FOOTSW
Use this input socket to connect a single button foot-switch. This can be used to alternate between the clean and drive channels. -
HEADPHONES
Use this output to connect headphones for silent practice and performance. Please note,when headphones are connected, the speaker is bypassed and no sound will be projected. -
POWER
Use this switch to turn the amplifier on/off.
Rear Panel
-
FUSE
This removable fuse should only be replaced with a replacement with the identical rating.
See the specifications page for rating information. -
AC INPUT
Connect the included IEC power cable here to power the head. -
SPEAKER OUTPUT
Connect the head to a speaker cabinet here using a speaker cable. -
SEND
Connects the GA-20E to the input of an effects unit. -
RETURN
Connects the GA-20E to the output of an effects unit.
Specifications
Inputs
- Guitar . . . . . . . . . . . . . . . . . . . . . . 1/4” Jack
- Aux In. . . . . . . . . . . . . . . . . . . . . . 3.5mm jack
- Footswitch. . . . . . . . . . . . . . . . . . 1/4” Jack
- FX Return. . . . . . . . . . . . . . . . . . . 1/4” Jack
Outputs
- Headphone. . . . . . . . . . . . . . . . . . 1/4” Jack
- FX Send. . . . . . . . . . . . . . . . . . . . . 1/4” Jack
- Speaker Output . . . . . . . . . . . . . . 1/4” Jack (4. Ohm Min.)
Power
- Input. . . . . . . . . . . . . . . . . . . . . . . 220-240V AC 50/60Hz
- Consumption . . . . . . . . . . . . . . . . 25W Max
- Max Output . . . . . . . . . . . . . . . . . 20W
- Fuse. . . . . . . . . . . . . . . . . . . . . . . . T0.5A, 250V
Misc
- Dimensions. . . . . . . . . . . . . . . . . . 370 x 190 x 190mm ( W x H x D)
- Weight . . . . . . . . . . . . . . . . . . . . . 5kg
If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com
KETTLESTRING LANE | YORK | YO30 4XF WWW.GEAR4MUSIC.COM