BOUYER RB-650X Ceiling Speaker User Guide
- June 12, 2024
- BOUYER
Table of Contents
BOUYER RB-650X Ceiling Speaker
Product photos
Dimensions
-
Remove ABS cover by rotating as below
Don’t remove cardboard holds
-
Check ceiling tile depth is between 5-30mm
-
Make a hole of 175mm of diameter
-
Insert 100V line cable through cable glands
-
Insert the dome in the ceiling
-
Insert clips in the slots and pull them down until cover is blocked
-
Plug cables on speaker + grille connector
-
Tips
Fold-up the 2 cables vertically on top of the connector to help their sliding in cable glands, then make them slide upward by squeezing them with one hand.
Remove cardboard holds now -
Then insert in the dome by making match the dome mark with the speaker notch
-
Turn until the grill hits its stop and is block.
-
To finish, push the grill upward
Specifications
Specifications RB-6501 + RB-6501
Nominal power : l0W
Power 100V : 10 / 6 / 3 / l.SW
Frequency range : 80 -18 KHz
Press ion/ SPL (1 W / 1m) : 90.1 dB
Directivity {-6dB) : 180°
Color: black
material : ABS
weight : 1.96 Kg
borniers / block terminals
Specifications RB-6502 + RB-6502-B
Nominal power : 20W
Power 100V: 20 / 15 / 7 / SW
Frequency range : 80 -18 KHz
Press ion/ SPL (1 W / 1m) : 90.1 dB
Directivity (-6dB): 180°
Color: black
material : ABS
weight : 1.96 Kg
borniers / block terminals
Specifications RB-6504 + RB-6504-B
Nominal power : 40W
Power 100V : 40 / 30 / 20 / l0W
Frequency range: 80 -18 KHz
Press ion/ SPL (1 W / 1m) : 90.1 dB
Directivity (-6dB): 180°
Color: black
material : ABS
weight: 1.96 Kg
borniers / block terminals
Important Instructions
Please make sure to read carefully all following instructions
-
Take a look at all the warnings. Don’t remove the security tags on the device or other information.
-
Use the device only for indicated applications, and in an appropriate way.
-
The use of this device is not recommended above 2000 meters above sea level.
-
Don’t obstruct aeration openings with some objects.
-
Respect a minimal distance around the device to ensure enough aeration.
-
Don’t expose the device to rain or moisture (except if the device is conceived for outdoor use – in this case, you must respect the instructions which come with it).
-
If your device doesn’t work anymore, and if water or other objects enter inside, turn it off directly and unplug it. This device must be repaired by a qualified person.
Devices plugged on mains power -
Turn off the device before touching any conductive parts inside it.
-
Don’t switch the device on-off several times in a row : you risk to reduce the longevity of its intern components.
-
Replace the fuse only by a fuse with the same type and the same caliber.
-
Warning, a power plug has three spindles, including a protection ground spindle. The third spindle ensures safety. Check if the protection ground spindle provided enters in the electrical outlet, otherwise, consult an electrician to replace the obsolete outlet.
Warning symbols
| Protection ground spindle
---|---
| Ground spindle
| Direct current or continuous voltage
| Alternating current or Alternating voltage
| Dangerous voltage by touch, risk of electrification, even electrocution
| Read carefully the joined document
| Warning, hot surfaces, don’t touch during operation, risk of burns
Devices which are excessive thermal energy sources
Warning, hot surfaces, don’t touch during operation, risk of burns.
Audio devices such as loudspeakers
High sound pressure, risk of hearing damage, do not listen at high volume
levels for extended periods (greater than 90 dB).
Product’s disposal
At the end of product’s life, if it is installed on the French territory (DOM-
TOM included), please contact BOUYER to organize its destruction according to
the WEEE directive. Otherwise, please follow country’s local regulations to
install the product.
Customer Support
bouyerfrance@bouyer.com
www.bouyer.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>