Guanyu GY-Z7L Wireless Charger Stand User Manual

31 N 1 Fast Wireless Charger
User manual

Notice: To ensure charging3 devices safely and efficiently, you must use 9V/2Aadapter and quick charge cable, if including 15W fast charging phones, you must use a 9V/2.7Aor 12V/2Aadapter and quick charge cable (if not use the appropriate adapter and quick charge cable, the charger may not charge phone fast, or may not charge3 devices simultaneously, or may even damage the charger)

Product Appearance

1. Wireless Charge watch magnetically area
2. Wireless charge area for Phone
3. Touch-sensitive key
4. Wireless charge area forts earphone
5. LED Intelligent light ring
6. Non-slip mat
7. Type-C port
8. Non-slip mat
9. Heat dissipation Holes
10. Product tag

Product Introduction

The 3-in-1 wireless charger, a compact charging house, powered from only one outlet, can charge 3 devices simultaneously. When charge your galaxy phones, watches, buds, other compatible phones, and more TWS, just put them on, wireless charging will automatically start, all this will make your desk clean and tidy, and make your life easier. The charger is so space-saving designed can help you integrate your mobile phone intelligence and life very well, especially for Samsung users. Besides, it is fashion that the light ring is so colorful and has the Runningwaterlight effect showing the charging state, if you want to turn it off or turn it on the might just touch the touch-sensitive key.

Operation Steps

1. Connect the charger to a 9V/2A,9V/2.7A or 12V/2A adapter through a Type-C quick charge cable to switch on the power;
2. Put your phone on then charge;
3. Put the Galaxy watch on and suck it up to charge (roll the watch band to minimize to charge better);
4. Plug your earphone on then charge them,

LED light ring instructions

Greenlight is on: Standby mode or not charging the phone
Runningwater light effect: Wireless charging the phone
Red light flashes: Foreign body is detected or the phone is misaligned (the phone charging will automatically stop)

Charging Schematic Diagram

Applicable Devices

1. Smart Phone
   (1) Samsung: Galaxy S:20 5G,20+ 5G,20 Ultra 5G,10,10+, 10e,9,9+,8,8+,7,7 edge,6,6 edge, 6 edge+, 6 G9209,6 Active;Galaxy Note:20,20 Ultra 5G,10,10e,10+,9,8,7,6,5;
   (2) Apple: iPhone 12,12 Pro,12 Pro Max,12 mini,SE,11,11 Pro,11 Pro Max, Xs, Xs Max, XR,x,8,8 Plus;
   (3) LG: G2(VS980,Verizon version),G3,G6,G6+,G7,G7 ThinQ,G7+ ThinQ,G8,G8 ThinQ,V30, V30+,V35,V40 Thi nQ,V50, V50 ThinQ, LG Lucid2 (VS870),LG Optimus F5 (As870),LG Optimus Vu 3,Spectru m 2,Optim us G Pro,Optim us Vu 11,Opti mus LTE 2,etc.
   (4) MOTOROLA: Droid Turbo, Droid Turbo2, Droid 5, Moto Maxx, Ultra M, Moto X Force
   (5) Huawei: P:40 Pro,40 Pro+,30 Pro; Mate:40 RS,40 Pro,40 Pro+,305G,30 Pro 5G,30,30 Pro, 30 RS,20 Pro,20 RS, RS;
   (6) Xiaomi: 10,10 Pro, 9, 9Pro, Mix 3, Mix 2s; Including other devices with wireless charging receiver built-in, other devices need to add a wireless charging receiver
   (Note: All devices must meet the Qi standard).

2. SmartWatch:
   Galaxy watches: Watch 3/Active 2/Active 1/ Gear S3/Sport etc

3. Ea phone:
   Galaxy Buds, Buds+,Galaxy Buds Live; AirPods 2, Ai iPods Pro; more TWS

Product Specification

Input:9V/2A,9V/2.7Aor12V/2A (must use 9V/2.7A or 12V/2Awhen charging 3 devices including 15W charging phone)
Phone Output: 15W/10W/7.5W/5W
Watch Output: 2.5W (Galaxy watches:Watch 3/Active 2/Active 1/ Gear S3/Sport etc)
Earphone Output: 3W (TWS Earphone:Galaxy Buds,Buds+,Galaxy Buds Live; and more)
Input Interface: Type-C port
Transmission Distance(Phone):4 8mm
Conversion Rate(Phone):?-73%
Product Size:174.2X113.5X100.5mm

Accessories List

Wireless Charger’ 1, Type-C quick chargeable,User manual%

Attention

1. Please keep the charger away from water or other liquid,
2. If you need to clean the charger, please make sure it is not connected power supply;
3. Using Environment temperature remains 0-45°C.
4. The charging environment of the smartphone will not be <55°C (4131°F)

Answer questions

1. If you’re experiencing interrupted or slow charging, check the following:

1. The back of your phone should not have any metal, pop sockets, or credit cards
2. Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
3. The wireless charging coil on Sony phones is located slightly below the center.
4. Phone cases should be no thicker than 5 mm for effective charging
5. Check whether the adapter is QC3.0 fast charger.

2. If you’re failing to charge your device, please try out the following:

1. Please restart your rcel I phone and test with another USB cable
2. Please check whether the indicator turns on or not.
3. PleasechecktheAdapterisQC3.0 Qu ink charger (Output:9V/2A) or not, iPhone original adapter does not match the wireless charger.
4. Please check your Phone case thickness(<=5mm). Metal ring or Magnetic Pad %fill not be available.

3. If you re using the recommended wireless charger with the QC3.0Adapter and have removed any potential charging obstruction, but are still experiencing issues, try:

1. Replacing the cable connecting your wireless charger.
2. Rebooting your phone.
3. Unplug the adapter and reinsert

FCC Statement

This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  FCC radiation exposure
  The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>