Guanyu GY-Z7D 4-In-1 High Speed Wireless Charging Station User Manual
- June 5, 2024
- Guanyu
Table of Contents
Guanyu GY-Z7D 4-In-1 High Speed Wireless Charging Station
Thank you for purchasing the 41 n 1 High Speed Wirel ess Charging Station. Please read the instructions carefully before using this product.
Product Specification
- Product na me: 4 In 1 High-Speed Wireless ChargingStation
- In put: 9V/2A 9V/2.7 A or 12V/2A
- Watch Output:2.SW
- Phone Output: 15W/10W/7.5W/5W
- Earphone Output:3W(MAX)
- USBOutput:5V/lA
- Conversion R ate(Phone): 73%
- In put interface:Type-C port
- Transmission Distance(Phone): ¾Bmm
- Product Size: 187x90xl3(m m)
- Color:White/Black
Accessories List
- 4 In 1 High-Speed Wireless ChargingStationx 1
- Type-C quick charge cablex 1
- User manual xl
Applicable Devices
- Smart Phone:Compatible with all devices with Qi Standard. For all other phones without Qi Standard,those will be working with wireless receivers. Model:
- apple: iPhone 12,12 Pro,12 Pro Max,12 mini,SE,11,11 Pro,11 Pro Max, Xs, Xs Max, XR,x,8,8 Plus;
- Samsung: Galaxy S: 20 SG, 20+ 5G, 20 Ultra SG, 10,10+,lOe,9,9+,8,8+,7, 7 edge,6,6 edge, 6 edge+, 6 G9209,6 Active; Galaxy Note: 20,20 Ultra 5G,10,10e,10+,9,8,7,6,S;
- Huawei: P:40 Pro,40 Pro+,30 Pro; Mate:40 RS,40 Pro,40 Pro+,30 SG, 30 Pro 5G,30,30 Pro,30 RS,20 Pro,20 RS, RS; ©Xiaomi: 10,10 Pro,9,9Pro, Mix 3,Mix 2s;
- Smart Watch:Apple: iWatch Sl,S2,S3,S4,S5.
- Earphone:
- CD Apple Air Pods 2, Pro;
- Saumsung Galaxy Buds,Buds+;
- Huawei Freebuds 2,3; and more TWS(with wireless charging case).
Product Appearance
Operation Steps
- Connect the charger to a 9V/2A, 9V/2.7A or 12V/2A adapter through a type-C quick charge cable to switch on the power;
- Put your phone on and charge
- Put the apple watch on and suck it up to charge
- Put your earphone case on and charge;
- Equipped with USB port, it can charge USB devices such as mobile phone, electric toothbrush and portable power supply
LED light ring instructions
- Green light is on: Standby mode or not charging the phone S R unning water light effect: Wireless charging the phone
- Red light flash: Foreign body is detected or the phone is misaligned (the phone charging will automatically stop)
Attention
- Do not disassemble the product by yourseft;
- Please keep the charger away from water or other liquid;
- lf you need to clean the charger,please make sure it is not switched on the power;
- Using Environment temperature remains 0-45″C;
- The charging contactsurface on the back of the phone shall not contain metal substances,such as iron sheet, ring and metal protective case;
- When using adapters below 9V/2A, the product will not work normally. To ensure the safe and efficient charging four devices at the same time, it is recommended that you use the 9V/2A or more than 12V/2A adapter.( if not use the appropriate adapter , the charger may not charge phone fast, or may not charge 4 devices simultaneously, or may even damage the charger),
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>