ACCORD LIGHTING 1275 Pendant Lamp Instruction Manual
- June 8, 2024
- ACCORD LIGHTING
Table of Contents
1275 Pendant Lamp
Instruction Manual
ASSEMBLY INSTRUCTIONS
USA & CANADA
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
Color Temperature: Lamp dependent
CRI: 90
Luminous Flux: Lamp dependent
Total Power: Lamp dependent
Input Voltage: Lamp dependent
Input Frequency: 60Hz
Isolation: ClassII
Material: natural Wood Veneer MDF
Weight:
INSTALLING THE FIXTURE ON CEILING
Turn OFF the power before start the installation.
-
Insert the electrical cable through the conical cable gland, nipple, canopy and crossbar.
-
Adjust the length of the electrical cable by attaching a knot to keep the luminaire at the desired height.
-
Connect the power supply wires to the junction, in accordance with applicable local standards, as shown in the diagram opposite.
-
Screw the crossbar into the junction box using the screws provided.
ADJUSTING THE FIXTURE HEIGHT
After making the electrical connection, insert the excess wire into the junction box. -
Bring the canopy to the ceiling and secure it by screwing the conical thread pass with the nipple to the crossbar, until everything is safe on the ceiling.
-
Once the luminaire is suspended and level, install the lamp (not included) in socket GU-10 fixed on the nozzle base.
Turn ON electrical power.
Your luminaire is now ready for use.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY.
!Its recommended to read these instructions completely and carefully before
proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual.
The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>