EMOTOL EM-SP1 Dual-Mic ENC Business Headset User Guide
- June 12, 2024
- EMOTOL
Table of Contents
EMOTOL EM-SP1 Dual-Mic ENC Business Headset
Product Information
| Product Name | Dual-Mic ENC Business Headset |
|---|---|
| Model | EM-SP1 |
| Product Structure |
- MFB button
- +volume
- -volume
- TYPE C Charging port
- Indicator light
- Mute button
- Microphone
Specification| Bluetooth version: V5.2
Transmission distance: 15M
Battery capacity:300mAh
Talk time: 24H
Playback time: 30H
Charging port: Type-C
Charging time: 1.5H
Material list: TPU, PC+ABS
Water-resistant Level: IPX6
Product Usage Instructions
Switching Left / Right Ear
To switch the ear position of the headset, follow the instructions below:
- Rotate the headset 90 degrees to the right to wear on the right ear.
- Rotate the headset 90 degrees to the left to wear on the left ear.
If you feel the headset is not fitting properly, adjust the eartip to a comfortable position.
Button Instructions
| Button | Instructions |
|---|---|
| MFB button | Hold for 2 seconds to power on/off |
| MFB button | Press once to answer/hang up a call |
| MFB button | Hold for 1 second to refuse to answer/cancel a call |
| MFB button | Press three times to activate voice assistant |
| MFB button | Hold for 2 seconds to play/pause |
| MFB button | Press once to go to the next track |
| MFB button | Hold for 2 seconds to increase volume |
| MFB button | Press once to go to the previous track |
| MFB button | Hold for 2 seconds to decrease volume |
| Mute button | Hold for 2 seconds to mute the microphone |
Pairing Instructions
To pair the headset with a device, follow the steps below:
- Long press the MFB button for 3 seconds to turn on the headset.
- Turn on the Bluetooth of your phone.
- Search for the device named “SP1” and connect.
Note: The headset will automatically turn off if there is no connection within 3 minutes.
Connecting with 2 Devices
To connect the headset with two devices, follow the steps below:
- Connect the first device and then disconnect it.
- Connect the second device and reconnect the first device.
- If you cannot connect, try repairing and connecting the devices again.
Note: Please disconnect the first device, or the headset Bluetooth name will not be found.
Possible Problems and Solutions
| Problem | Solution |
|---|---|
| Disconnection | Check if the distance between the mobile phone and the headset |
exceeds 15m.
No sound| Check if the headset volume is low or if the headset is
correctly connected to the phone.
Low battery| When the battery is low, the indicator light will flash. Use a
standard Type-C cable to charge the headset.
Cannot pair| Check if the Bluetooth device is turned on and search for the
headset device name.
Attention
- Do not let children play with the headset as small parts may cause suffocation.
- Do not disassemble the headset, as it will be considered as man-made damage and not covered by the warranty.
- Do not use the headset in a humid environment or in pouring rain.
- Do not clean the headset when it is charging. Separate the headset from the charging cable before cleaning.
Customer Support
If you have any issues, please contact us via email at emotalvip@outlook.com.
Product Structure
- MFB button Attention
- +volume
- -volume
- TYPE C Charging port
- Indicator light
- Mute button
- Microphone
Specification
- Bluetooth version: V5.2
- Transmission distance: 15M
- Battery capacity: 300mAh
- Talk time: 24H
- Playback time: 30H
- Charging port: Type-C
- Charging time : 1.5H
- Material list: TPU,PC+ABS
- Water-resistant Level : IPX6
The Way to Switch Left / Right Ear
- If you feel the headset is not fit, please adjust the eartip to a comfortable position
- Please follow the instructions for the better use
Button Instructions
How to Pair
- Long press the MFB for 3 seconds to turn on the headset, and then turn on the Bluetooth of the phone, search the device named “SP1” and connect.
- Remark: the headset will turn off automatically when there is no connection within 3 minutes.
How to Connect with 2 Devices
- Connect the first device, then disconnect it
- Connect the second device and reconnect the first device
- If you cannot connect, please try to repair and connect the devices again.
Note: please disconnect the first device or the headset Bluetooth name will be not found.
The Problems You May Have
- Disconnection: Please check if the distance between the mobile phone and the headset exceeds 15m.
- No sound: Please check if the headset is at the low volume or the headset connects with the phone correctly.
- Low battery: when it is at low battery, the indicator light will flash.Please use the standard type-c to charge when battery low.
- Cannot pair: Please check whether the Bluetooth device is turned on and search for the headset device name.
Attention
- Do not let children play headset. Small parts may cause suffocate.
- Do not disassemble the headset, which will be regarded as man-made damage, which is not included in the warranty.
- Do not use the headset under a humidity environment or in the pouring rain.
- Do not clean the headset when it is charging. Separate the headset from the charging cable before cleaning.
Customer Support
If you have any issues please contact us via support email as soon as possible, emotalvip@outlook.com
Documents / Resources
|
EMOTOL EM-SP1 Dual-Mic ENC Business
Headset
[pdf] User Guide
EM-SP1, EM-SP1 Dual-Mic ENC Business Headset, Dual-Mic ENC Business Headset,
ENC Business Headset, Business Headset, Headset
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>