FIAMMA 02096-09V Carry Bike Pro Instruction Manual
- June 1, 2024
- FIAMMA
Table of Contents
FIAMMA 02096-09V Carry Bike Pro
Product Information
Product Specifications:
- Product Name: CARRY-BIKE PRO / PRO N
- Model Numbers: 02096-09- / 02096-09V
- Maximum Load Capacity: 60kg
- Package Contents: Refer to the user manual
- Dimensions:
- CARRY-BIKE Pro: 69cm x 128cm
- CARRY-BIKE Pro N: 38cm x 69cm x 128cm
Installation Instructions:
Before installing the product, check the strongest points of the vehicle’s
wall where you can fix the brackets.
- Cut the tubes according to the desired vertical spacing.
- Tighten the bolt securely ensuring the washer is in contact with the plastic cover.
- Do not fully tighten the fork to the tube, leave a 2mm space.
- Fit the pre-cut upper cover to the Carry Bike fixing claw.
Product Usage Instructions
- Check that nothing is damaged or deformed before use.
- If in doubt about installation or use, contact the dealer.
- Installation should be done by qualified personnel following local regulations.
FAQ
Q: What should I do if any parts are damaged during transport?
A: Contact the dealer for assistance in case of damaged or deformed parts due to transport errors.
Q: Can I install the product myself?
A: It is recommended to have the installation carried out by qualified personnel in compliance with local regulations for safety and proper functioning.
Q: How much weight can the CARRY-BIKE PRO/N carry?
A: The CARRY-BIKE PRO can carry up to 15kg x4, and the CARRY-BIKE PRO N can carry up to 30kg x2. The maximum load capacity is 60kg.
Please consult the website for instructions in the following languages: NL-SV- DA-NO-FI-PT.
Package Contents
Dimension
Installation Instructions
Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.
Before installing the product, check the strongest points of the vehicle’s wall, where you can fix the brackets.
Cut the tubes (A) according to the desired vertical spacing.
Tighten the bolt well so that the washer is in contact with the plastic cover and the thread protrudes from the nut.
WARNING!
Do not fully tighten the fork to the tube, leave 2mm space.
Fit the (pre-cut) upper cover to the Carry-Bike fixing claw.
Attention:
keep the following labels and affix them to the Carry-Bike rails.
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawings.
Safety Instruction
-
Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility. Before installation, ensure compatibility with the vehicle on which the product must be installed.
-
In the event of an accident involving the vehicle and/or the product, ensure that the product has not been damaged. In the event of damage, contact your local retailer before moving the vehicle. Fiamma declines every responsibility for any modification of the product that may cause damage and/or injury to things and people.
-
Checking that the wall/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce these points.
-
After having positioned the Carry-Bike on the rear axle of the vehicle, the normal weight distribution on both axles would be modified. This variation must not exceed the maximum permissible axle load.
-
Never exceed the maximum permitted length and the total weight of the full-load vehicle.
-
Make sure that loading occurs following a correct weight distribution; it must be uniformly distributed (the heaviest bike must be placed near the wall of the vehicle) to ensure better stability.
-
Always give warnings about the presence of the Carry-Bike on your vehicle, use a clear signal for leaning loads and, in case of limited rear visibility, use the additional rear-view mirrors.
-
Take into account the presence of the Carry-Bike, paying attention during driving and especially during reversing manoeuvres, particularly if you have a parking assist system. Always comply with speed limits and the Highway Code. The speed should always be suitable for traffic conditions and towed loads. In the case of the use of the bike carrier with
tow make sure that the tow hook is always accessible and the corner mobility of the tow is guaranteed (volume measuring din 74058). -
Check periodically the bicycle rack to make sure it is firmly attached, especially during the first kilometres of long trips to avoid damage to the Carry-Bike/vehicle. Make sure the belts are not loose and that the holding brackets have not shifted. Replace worn components immediately.
-
It is advisable to remove the batteries from bicycles, before loading them on the carry-bike while travelling.
-
It is recommended to rotate the handlebars of bicycles to avoid damage to the vehicle wall, for which Fiamma declines all responsibility.
Warranty Fiamma
In case of defects concerning materials and manufacturing, the customer is entitled to the warranty under local laws and regulations of the country in which the product was purchased.
Contact Information
Fiamma S.p.A. – Italy
- Via San Rocco, 56 21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifications and models or to cease production of any model.