heysong H1N Waterproof Bluetooth Speaker User Manual

heysong H1N Waterproof Bluetooth Speaker

THE HEYSOII FITNESS SPEAKER
USER MANUAL

INTRODUCTION

Thank you for choosing the HEYSONG Bluetooth Speaker as your source for entertainment. This speaker can be used via a Bluetooth connection with a tablet, some computers and some smartphones to stream music and make wireless telephone calls. To make the most of the features of your speaker, we recommend that you carefully read this user guide first.

IMPORTANT WATERPROOF/SAFETY INFORMATION
HEYSONG FITNESS SPEAKER is waterproof, which means the speaker can be heavily splashed with water or left in the rain. If the speaker gets wet, it is recommended that you dry the speaker completely before using it again. Please note: please make sure that cover is closed and secure before using in a wet environment.

SPECIFICATIONS

• Bluetooth Range: 33ft (10m)
• Dimensions: 270 × 109 x 114.5 mm
• Input: DC 5V/2A
• Output: DC 5V/1A Power Bank
• Frequency Response: 20HZ-20KHZ

CONTENTS

1.  Speaker x 1
2.  USB-TYPE C Charging Cable x 1 3.
3. 5mm-3.5mm Aux-In Cable x 1
4. Strap x 1 5. User Manual x 1 CONTENTS

IMPORTANT SAFETY PRECAUTIONS

When using your Bluetooth Speaker, basic safety precautions should always be followed, including the following:

1.  Keep this product and its charging cable away from excessive heat.
2.  Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.
3. Do not disassemble, repair, alter or strike your device.
4.  Sort and restore properly of the discarded package, battery and electronics.

CHARGING YOUR SPEAKER

1.  Connect one end of the included Charging Cable to the Charging Port on your speaker. Then plug the other end of the USB Charging Cable into a suitable USB port on your computer, notebook or power bank to recharge your speaker’s internal rechargeable battery.
2.  When charging, a red LED light will flash to indicate that the unit is charging. The red light will illuminate when your unit is fully charged.

Tips:

1.  You will hear a “low battery” prompt when battery is low and needs to be recharged.
2.  To protect the battery’s durability, fully charge the speaker if it is not used for a long time.
3.  The internal battery of your speaker takes approximately 9-10 hours to be fully charged.

A QUICK LOOK AT YOUR DEVICE

1.  Play / Pause / Hands Free Press ” to play or pause a track. You can also press this button to pick up or hand up the call.
2.  TWS Function.
3.  ON / OFF / Light Button: Press and hold the button for power on. Press and hold the button again for power off. Press the “ ” Button twice to setting the lighting mode.
4.  Previous Song / Vol – Button To go back the previous track, press and hold the ” — ” Button. To lower the volume, press the ” ” Button.
5.  Next Song / Vol + Button To skip to the next track, press and hold the “ ” Button. To increase the volume, press the ” ” Button.

AUX IN MODE

1.  Power on, the Blue LED stay illuminated.
2.  Plug in the supplied 3.5mm cable into the unit. The other end is connected to your device.
3.  The Blue LED will be solid to indicated that you have entered Aux-In mode.

PAIRING BLUETOOTH DEVICES TO YOUR SPEAKER

To pair your Bluetooth audio device to your Bluetooth Speaker for the first time, please follow the steps below:

1.  Make sure your Bluetooth device is held within three meters of your speaker.
2.  Press and hold the” ” button for 3 seconds to turn on your speaker. It will go into pairing mode, and the blue indicator will keep flashing.
3.  Activate Bluetooth on your device and search for other devices. Once you have found “HEYSONG FITNESS” on your Bluetooth device, click it for pairing.
4.  Long press the “ ” to disconnect the Bluetooth connection from the device.

Note:
This speaker will pair with the last connected device when that device is in range. The speaker will be turned off automatically if no device has been paired for more than 10 minutes.

USING THE HANDS-FREE FUNCTION

When your phone or other smartphone is connected to the speaker follow the steps below to take calls hands-free.

1.  Press ” ” to pick up the call.
2.  Press and hold ” ” to reject the call.
3.  During call, press ” ” again to hang up the call.

TWS FUNCTION

If you have two of HEYSONG FITNESS, you can use the following steps to achieve wireless stereo pairing.

1.  Power on both speaker and make sure your speakers are not connected to other devices yet.
2.  Press” button on one of the speakers, the two speakers will connect automatically with indicated tone. You will see a blue LED blinks quickly on one unit and solid blue LED on the other one.
3.  Search Bluetooth device on your audio source and select “HEYSONG FITNESS.”
4.  When your speaker is successfully paired with the audio source, the indicator light will remain solid blue.
5.  Long press the “ ” on one of the speakers to disconnect the TWS connection.

POWER BANK FUNCTION
The unit will go into output mode in power-on status, and power-off will not effect output. When external device is fully charged, unit will power off automatically. Unit can be a power bank when playing music. When external device is fully charged, there is warning and automatically cut off output.

TROUBLESHOOTING

paired to device.
A voice “low battery” is heard every few seconds.| Speaker needs to be charged.
Bluetooth connection distance cannot reach to 33ft.| Avoid operating the Bluetooth speaker in areas of strong electromagnetic interference, such as near induction cookers, large power fans, motors etc. Move the speaker closer to Bluetooth device. Fully charge the speaker and try again.
The speaker will not power on.| Speaker needs to be charged.
The speaker doesn’t control track(s)/volume.| Speaker needs to be in Bluetooth mode for full control.
The speaker distorts at high volume.| The devices’ volume needs to be lowered.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>